Message
Yes,
there is. IPC-A-600 2.9.3
I am
sure this requirement is also reflected in IPC-6012A
Solder
Resist on other conductive patterns (SMT land patterns included)
<
1.25 mm pitch shall not encroach both sides of the land or exceed 0.05
mm
>
1.25 mm pitch shall not encroach both sides of the land or exceed 0.01 mm
Hi,
Is there a IPC
standard for how much, if any silkscreen can overlap a solder pad? What
process is recommended for cleaning a solder pad with silkscreen overtop of
it? Examples I have are silkscreen on 0805 pads halfway through it,
and some with silkscreen just barely touching.
Thanks,
Jim
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------