Sergio,

Certainly some of the CAM packages will convert dxf to Gerber (Graphicode,
Genesis, probably others).  We have also used CAMCAD from Router Solutions
(www.rsi-inc.com) .  It works pretty well.

You could also try this one http://www.artwork.com/

Regards
John

> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Sergio T. Ruiz
> Sent: September 23, 2003 10:56 AM
> To: [log in to unmask]
> Subject: [TN] dxf to gerber..
>
>
> we have a customer who generates dxf files rather than gerber files..
>
> this is fine for the rfq stage, but for manufacturing, we need to be able
> to convert them to gerber files. unfortunately, we have found nothing that
> does a good job at converting dxf to gerber..
>
> has anyone found anything like this?
>
> thanks!
>
>
> ____
> Sergio T. Ruiz
> technology and MIS
> Philway Products, Inc.
> (419) 281-7777 x232

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------