Sergio, Certainly some of the CAM packages will convert dxf to Gerber (Graphicode, Genesis, probably others). We have also used CAMCAD from Router Solutions (www.rsi-inc.com) . It works pretty well. You could also try this one http://www.artwork.com/ Regards John > -----Original Message----- > From: TechNet [mailto:[log in to unmask]]On Behalf Of Sergio T. Ruiz > Sent: September 23, 2003 10:56 AM > To: [log in to unmask] > Subject: [TN] dxf to gerber.. > > > we have a customer who generates dxf files rather than gerber files.. > > this is fine for the rfq stage, but for manufacturing, we need to be able > to convert them to gerber files. unfortunately, we have found nothing that > does a good job at converting dxf to gerber.. > > has anyone found anything like this? > > thanks! > > > ____ > Sergio T. Ruiz > technology and MIS > Philway Products, Inc. > (419) 281-7777 x232 --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------