Just one note - our State (Indiana) issues a permit/certification for all
x-ray equipment and it needs displayed on the equipment item.

-----Original Message-----
From: Cal Driscoll [mailto:[log in to unmask]]
Sent: Wednesday, August 06, 2003 1:22 PM
To: [log in to unmask]
Subject: Re: [TN] X-RAY Inspection System-Rules for New Users


Bob-
We just went through a similar eval with our safety team.
We did not need special insurance due to low low level power and minimal
x-ray scatter produced by the system..
We did how ever implement a safety program using a radiation survey meter to
detect ionizing radiation.
On our scheduled weekly and monthly PM's we now have maintenance take a
radiation survey to keep on file.
The Rad Survey meter runs about $400us.
With the maintenance (and tracking) schedule in place we opted not to have
associates wear dosimeter badges.
Dosimeter badges usually are worn for one month...sent to a lab to see the
Rad presence and then a report sent back to us. We felt we could keep a
better handle on worker safety providing weekly monitoring.

We also have checked into the x-ray cabinet to make sure it is properly lead
lined in all directions.

The next question is...what will replace the lead in an x-ray cabinet when
we go LEAD_FREE ?? <WINK>

Enjoy,
Cal Driscoll
Communications Test Design, Inc.
WWW.ctdi.com <http://www.ctdi.com>


-----Original Message-----
From: bob wettermann [mailto:[log in to unmask]]
Sent: Wednesday, August 06, 2003 1:43 PM
To: [log in to unmask]
Subject: [TN] XRAY Inspection System-Rules for New Users


Ladies and Gents:

We are considering purchasing a manual XRAY inspection system for some fine
pitch work that we do.

Here are the management concerns:

1. Do we need special insurance for such equipment? (ie liability question)

2. What safety precautions and procedures do we need to put in place to
protect our workers?

Regards

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------

BWET

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------



---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------