Steve - Photocircuits
Corporation uses there solder exclusively and has done so for the last 8
years or so. Contact me off line if you need further info.
Regards,
Gerard O'Brien
Photocircuits Corporation
-----Original Message-----
From: Tony Steinke
[mailto:[log in to unmask]]
Sent: Tuesday, August 26, 2003
8:53 AM
To: [log in to unmask]
Subject: Re: [TN] Electrolytic
Solder
Metallic Resources used to be
very popular in the board manufacturing with the HASL process, but with the
demand for ENIG, immersion tin, silver and other OSP's haven't heard much about
them. Never heard any negative comments about their solder.
----- Original Message -----
Sent: Tuesday,
August 26, 2003 9:18 AM
Subject: [TN]
Electrolytic Solder
Mornin'
again!
We've been approached recently by a company named Metallic Resources
( http://www.metallicresources.com
) that makes a solder they call "Four 9's"
( 99.99% pure), and they do it by using a proprietary electrolytic process.
They make a lot of claims about their solder. I was wondering if anybody uses
their solder, and if everything they say about their solder is true.
Thanks!
-Steve Gregory-
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------