Not to cause you more trouble Genny, but has anybody suggested irradiated PVC? It survives soldering temps better than regular PVC. 'Course this is only if your app can use it. Roger -----Original Message----- From: Genny Gibbard [mailto:[log in to unmask]] Sent: Wednesday, April 23, 2003 5:46 PM To: [log in to unmask] Subject: Re: [TN] wire coatings Thanks for the info so far. Upon closer examination of the part numbers we have in house, I noticed that the Teflon coated wire was a 19 strand type, while the PVC coated wire was a 7 strand type. Would these finer strands also make the wire much more susceptible to breakage with a little wiggling (the initial problem)? Do you think that if I brought in a 7 strand teflon coated wire that it might solve some of the breakage problems? Thanks. -----Original Message----- From: Genny Gibbard [mailto:[log in to unmask]] Do you remember my question regarding the midplane assembly? Turns out that there was a reel of mislabelled wire in house, and a whole bunch of assembly has been done using a PVC coated wire, instead of the teflon coated wire I spec'd. Apparently the wire in question is obsolete, but they like using it better than the teflon, and want to continue to use that. I don't know much about wire coatings - what is the difference between these two coating types, and when would you want to or not want to use them. I need to decide whether we need to force them to change out the wiring they've already done. Sigh... Thanks for your help in advance. --------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------