Hi Ezequiel, Are those 5 mil hole blind vias? How thick is the board? Ted --- Ezequiel Cruz <[log in to unmask]> wrote: > Could someone help me with the following. > I have a BGA with 5 mil (.127 mm) holes through the > entire stack. > I need these silver filled plugged. > I need the correct call out for my notes on this > procedure. > > I also have a requirement to have this design > finished in gold. My regular > board house calls this finish "Gold Body". However, > I really need the > thickness call outs since this finish is being used > for manufacturing and > reliability issues per the above BGA. But I also > have an area for a mix > connector which should increase the thickness of the > finish in that area > since these will be surface contact pads. > > If there is anyone out there who can help me with > these issues, I really > appreciate the feedback. > > Thank You, > Ezequiel Cruz > > --------------------------------------------------- > Technet Mail List provided as a free service by IPC > using LISTSERV 1.8e > To unsubscribe, send a message to [log in to unmask] > with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt or (re-start) delivery of > Technet send e-mail to [log in to unmask]: SET Technet > NOMAIL or (MAIL) > To receive ONE mailing per day of all the posts: > send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: > http://listserv.ipc.org/archives > Please visit IPC web site > http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at > [log in to unmask] or 847-509-9700 ext.5315 > ----------------------------------------------------- __________________________________________________ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com --------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------