Many
thanks to Phil, Ahne, Tom and Steve for the fast replies to
this.
Some
good information about gerber / aperture files in there as
well.
(I've
actually used an old vector plotter in the past - almost remember how to load
the tape drive and initialise..)
I've
tried loading it as an 'Eagle' file with no success.
Unfortunately, I don't have the option in Camtastic to
load it in the Dassault Systemes format.
Looking at the file using wordpad, it is quite
readable, and it may be that the board fabricator may be able to use this to
manually edit the aperture list within their own CAM
program.
regards,
Phil.
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------