Many thanks to Phil, Ahne, Tom and Steve for the fast replies to this.
Some good information about gerber / aperture files in there as well.
(I've actually used an old vector plotter in the past - almost remember
how to load the tape drive and initialise..)
 
I've tried loading it as an 'Eagle' file with no success. 
Unfortunately, I don't have the option in Camtastic to load it in the
Dassault Systemes format.
 
Looking at the file using wordpad, it is quite readable, and it may be
that the board fabricator may be able to use this to manually edit the
aperture list within their own CAM program.
 
regards,
 
Phil.

 


---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------