Glyptol works well as a witness mark. ----- Original Message ----- From: "Phil Nutting" <[log in to unmask]> To: <[log in to unmask]> Sent: Friday, December 27, 2002 1:30 PM Subject: [TN] marking torques screws > Hi everyone, > > Do any of you have experience with marking screws that have been torqued? We are thinking that there should be some "paint" on the screw driver tip when it is inserted into the head so when completely torqued it can be identified. Just painting on some paint after the fact can let a loose screw through inspection. > > Just to make the whole project harder we need a material that will not dissolve in Shell Diala AX transformer oil. Also long pot life, but quick cure once applied would be good. I know, that would be a good trick. > > One thought was simply using finger nail polish. > > What are your thoughts? > > Thanks, > > Phil Nutting > > --------------------------------------------------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8e > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > ----------------------------------------------------- > > --------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------