Hi Bill!

Was that called out on the fab drawing? I've ran across a few boards here
that still call that out on the drawing, and TRY and get that changed before
the boards are fabbed...most of the time I've been lucky, but there's been a
few that slipped by me.

Bottomline, if it's called out on the drawing, you don't have much recourse...

-Steve Gregory-


> Anyone aware of a spec that sets the accept/reject criteria for boards that
> come in with solder UNDER the soldermask? Is this actually done as a
> legitimate practice? WHY would a vendor make the boards this way? Shouldn't
> we be making all boards to be SMOBC when there is a soldermask?
>
> Bill Brooks
>



---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------