George,
Can
you reference any testing/studies that quantify the bondability of this met.
scheme. What type of Gold bonding was performed, Ball or Wedge? Any
input would be greatly appreciated.
Bill
C.
NorLux
Corp.
I take it
you have your own reasons for applying electroless nickel as the barrier layer
underlying the soft gold layer. Electroless nickel will work just fine for
your application.
Having said that, if your wire bonding sights are
bussed to allow for Gold plating, then they also are bussed for electrolytic
nickel plating, which is gnerally a much less demanding process to run
and maybe accomplished using the same racking just prior to gold plating.
Electroless nickel has traditionally been used where no bussing is
available.
An excellent surface for gold wire bonding is electroless
nickel/electroless palladium /flash gold at 100uins/12uins /1uins (nicroinch)
respectively.
George Milad
HDI Consulting
Chairman IPC Plating
Committee
(516) 901-3874 cell
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail
to [log in to unmask]: SET Technet Digest Search the archives of previous posts
at: http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/html/forum.htm for additional information, or contact Keach
Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------