Fellow TechNetters,

   Is the above test VALID for samples in which ONE or BOTH side of the PTH
have been PLUGGED with an appropriate fill.   Most customers are using VIA
Fill/TINT on PCB/PWB now a days.   In a PREVIOUS LIFE this was not
acceptable.   Is this a common practice.   Nothing is mentioned in the
document

Victor G. Hernandez

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------