For the over 2 hundred folks having bought the MoonMan DFM/CE book I have found, as some of you have, a semi-major error as follows: The semi-minor/major defect is on pages 247 (top of page), 260, and 302. Though relatively minor, the defect is serious enough to need fixing especially concerning the master drawing notes and x-sectioning requirements On the pages indicated, the following paragraph must be corrected. Note: Two quality conformance test circuits are supplied with each MLB design One shall be used by the supplier for testing per note 4.3 and shall be returned to POD, after having been made traceable to each board. The other shall be returned, untested, to POD after having been made traceable to each board supplied. Quality conformance test circuitry shall be placed as indicated on this drawing and/or IPC-2221 figure 12-1. The minor/serious defect is 4.3 should be 7.3. There are other typos in the book, as I'm sure you all are aware and will be changed by the first upgrade. I appreciate all your feedback on these minor/major feedback and thanks for actually reading the book. Thanks for not being too harsh as the MoonMan is very sensitive, or not. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------