Mark
I have not seen a 104 pin in a long time. The number of rows will
determine how many layers you will need. Four rows two layers using top
side and one internal layer. It all depends on how far into the BGA field
your signal routes are. Typically you can route the first two rows of a
BGA on the top side with no vias after that you have to use an inner
layer and dog bone the BGA field. This will affect testing the pins
of the BGA that are routed on the top side only. If this is to be
Controlled Impeadance your stack -up will drive the trace width on the
outer layer and depending on the pitch of the BGA may not be routable
out of the second row of pins.
Paul
Mark Mainland wrote:
Hello,
Is it possible to break out on only 2 layers with a 104pin BGA? Its going on a 6 layer and the customer only wants traces on top and 1 internal layer!Thanks,
Mark
--------------------------------------------------------------------------------- DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil. To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------