--------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 13:25:40 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Joseph Spicuzza <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Joseph Spicuzza <[log in to unmask]> Subject: Re: Microvias and rigid-flex in one board shop? X-To: "Houston, Terri" <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Our shop may be able to fabricate this, but we need more info. Contact me and I'll forward you to the fab team. Joseph Spicuzza Quality Assurance Manager Advanced Interconnect Products Division Compunetics, Inc. PH: 412 858-6166 FX: 412 373-8060 [log in to unmask] -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Houston, Terri Sent: Friday, April 26, 2002 12:36 PM To: [log in to unmask] Subject: [TN] Microvias and rigid-flex in one board shop? Hi folks, I'm looking for a board shop with actual experience in building a 14+ layer, rigid-flex board that has microvias in the rigid sections. It seems the combination of these two features is hard to find at one supplier, even though I'm only looking for a small quantity of prototypes. Any suggestions would be greatly appreciated--even self-marketing would be accepted (off TechNet, please). Thanks in advance, Terri ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 10:26:56 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, peter lee <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: peter lee <[log in to unmask]> Subject: Senju sparkle noclean paste In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Does anyone have experience using this paste. I was told that it is unstable unless running in N2 environment. Rgds, Peter __________________________________________________ Do You Yahoo!? Yahoo! Games - play chess, backgammon, pool and more http://games.yahoo.com/ --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 10:54:22 -0700 Reply-To: [log in to unmask] Sender: TechNet <[log in to unmask]> From: Ahne Oosterhof <[log in to unmask]> Subject: Re: 0402 stencil apperture design X-To: peter lee <[log in to unmask]> X-cc: Jim <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi Peter, At Plexus they have published a rather extensive report on the causes of tombstoning. It included some remarks on the incidence of solder balls. Both problem areas are partially caused by pad design on the board and aperture design in stencils. (Some say the most significant factors for tombstoning are pick-and-place accuracy and oven temperature profile.) To minimize tombstoning the report indicates that pad design has a minimal impact when using 0402-s, but for 0201-s you want to stay close to the 'normal' size for pad design. To minimize solder balls it is recommended to change stencil apertures to home plates. My personal preference (and that of some of our customers) is to change the aperture to an oval, which has the effect of reducing excess solder in all four corners of the pads. Sometimes in addition the overall size is reduced by 1 or 2 mil. An additional advantage is that the OVAL is a Gerber shape improving data compactness, data sharing and interpretation reliability and it means that for a single component there are no 'left' and 'right' or 'top' and 'bottom' apertures (or D-codes). Have fun, Ahne. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of peter lee Sent: Friday, April 26, 2002 07:58 To: [log in to unmask] Subject: [TN] 0402 stencil apperture design Has anyone used a "D"-shape 0402 land pattern on their design? The pad dimensions are 18x19mils (semi-circle on the other ends) and 16mil spacing between the 2 pads. What would be the stencil apperture recommendation for the above design? We've used round pads for 0402s and 15% apperture reduction before. Rgds, Peter __________________________________________________ Do You Yahoo!? Yahoo! Games - play chess, backgammon, pool and more http://games.yahoo.com/ ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 11:05:08 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: Tuan Bui <[log in to unmask]> Subject: Re: Immersion Gold Vs Immersion Tin for 0201 landpatterns X-To: [log in to unmask] MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Hi George, The Immersion Gold process that the PCB vendor stated that the Immersion gold (7-10 micron) over nickel over copper. The Immersion Tin process, as you have mentioned, is about 44 micron. It is good to hear that the immersion tin process can be easily/inexpensive reworked when its shelf live expires. BTW, thanks for your input. Tuan Bui Proc Dev Eng Conexant Systems Inc. George Milad <[log in to unmask]> To: [log in to unmask] Sent by: TechNet cc: <[log in to unmask]> Subject: Re: [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns 04/26/2002 08:47 AM Please respond to "TechNet E-Mail Forum."; Please respond to Gmilad Tuan, Could you clarify the "Immersion Gold" process that you are using. Is it Immersion gold over copper or it immersion gold over nickel over copper? Immersion Tin is a viable alternative for your application. However the thickness required will much higher than the 7 - 8 uins that you are presently using for gold, more like 30 - 40 uins. Tin is realtive inexpensive and can be easily reworked if shelf life becomes an issue. George Milad HDI Consulting Chairman IPC Plating Committee. --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 11:41:58 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Phil Bavaro <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Phil Bavaro <[log in to unmask]> Subject: Re: Senju sparkle noclean paste X-To: peter lee <[log in to unmask]> In-Reply-To: <[log in to unmask]> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed We have about ten years of experience using Senju solderpaste without any issues. You have not stated what specific paste part number you are referring to. And I am not sure I know what you mean by solderpaste being described as unstable. Phil At 10:26 AM 4/26/2002 -0700, peter lee wrote: >Does anyone have experience using this paste. I was >told that it is unstable unless running in N2 >environment. > >Rgds, >Peter > >__________________________________________________ >Do You Yahoo!? >Yahoo! Games - play chess, backgammon, pool and more >http://games.yahoo.com/ > >--------------------------------------------------------------------------------- >Technet Mail List provided as a free service by IPC using LISTSERV 1.8d >To unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet >To temporarily halt delivery of Technet send e-mail to [log in to unmask]: >SET Technet NOMAIL >To receive ONE mailing per day of all the posts: send e-mail to >[log in to unmask]: SET Technet Digest >Search the archives of previous posts at: http://listserv.ipc.org/archives >Please visit IPC web site http://www.ipc.org/html/forum.htm for additional >information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 >ext.5315 >--------------------------------------------------------------------------------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 15:10:41 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Steve Kelly <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Steve Kelly <[log in to unmask]> Subject: Re: test for film residue X-To: Ted Stern <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_08F5_01C1ED34.88AD36E0" This is a multi-part message in MIME format. ------=_NextPart_000_08F5_01C1ED34.88AD36E0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit We etch in Ferric chloride so do not use any tin chemistry - however Rudy's comments are interesting - we do have an immersion tin line so we can easily do this test. Thanks Steve Kelly -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Ted Stern Sent: Friday, April 26, 2002 11:47 AM To: [log in to unmask] Subject: Re: [TN] test for film residue Steve: Another potential source of "residue" on copper surfaces during dry film stripping is absorption of oils - often attributable to antifoam and/or excess use of antifoam. Because copper is very oleophilic, minimal contamination may be problematic (including fingerprints) and can contribute to a variety of post strip processing problems; incomplete final etching ("copper spots") being one of the more common defects. The methods suggested by Rudy would detect this problem. As a severe (and unusual) example of oil contamination, we once encountered a customer employing compressed air agitation to dislodge accumulated dry film particulate in the corners of the dry film stripper spray sump. The air was introduced when the line was idle to improve continuous dry film particulate filtration. The customer had been employing the process for quite some time when random copper spots began to be observed. If the stripper was replaced, the problem disappeared; only to reoccur in 1-2 days. To make a long story short, it was determined (after eliminating anti-foam, checking for tin in the bath and on panels, addressing copper oxidation, examining rinse water quality, dry film leaching in the alkaline etch, etc.) a leaking seal in the air compressor was contaminating the stripper sump with minute volumes of oil, but enough to contaminate the copper surface and inhibit alkaline etching. Regards, Ted Rudy Sedlak wrote: In a message dated 4.25.02 12:23:23 PM Pacific Daylight Time, [log in to unmask] writes: Does anyone know of a test to look for film/stripper residue after copper stripping. Assume you mean after stripping film from Copper? Stripper residue is a tough one, and not real likely to be an issue. Tarnish could be another issue that is very difficult to test for except by sight. Depending on stripper, this could be significant....the clue is, if the problem gets worse as the stripper chemistry gets older, it is quite possibly tarnish... Film residue is the most likely residue. One way to test that is a good test, but, can make your test board need rework is to drop on an immersion plating solution. Two different ones are common. Some people use immersion Tin to test if the surface is clean. A drop should plate uniformly, and adherently. Another test is to drop on Silver Nitrate solution...usually use the stuff that is used for titration in the lab. The surface should essentially immediately turn black, and it should be adherent. Another residue problem that can occur, and especially in old stripper chemistry, is immersion Tin residues....this does not relate to the test above. Rather, your stripper chemistry can pickup Tin from the oxide on the plating on outerlayers, and redeposit this on the Copper next to it. The potential for this problem is magnified tremendously if you strip in a tank, rather than exclusively in sprays, and can be strongly affected by the condition of the Tin plating solution. If your Tin electroplating solution looks very milky, this is disperse Tin oxide, which co-deposits with the Tin metal, then easily dissolves in certain kinds of stripper chemistry, and redeposits, sometimes even is sprays, on the adjacent Copper. The film residues have become an especial problem in recent years, as the new generation of photoresists, which stick VERY well, require specially formulated types of stripper chemistry. I probably have told you more than you want to know, but, in case I haven't, you can call me to discuss it. Rudy Sedlak RD Chemical Company 650-962-8004 ------=_NextPart_000_08F5_01C1ED34.88AD36E0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"> <META content=3D"MSHTML 5.00.3315.2870" name=3DGENERATOR></HEAD> <BODY> <DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN = class=3D087020919-26042002>We=20 etch in Ferric chloride so do not use any tin chemistry - however Rudy's = comments are interesting - we do have an immersion tin line so we can = easily do=20 this test. Thanks Steve Kelly</SPAN></FONT></DIV> <BLOCKQUOTE style=3D"MARGIN-RIGHT: 0px"> <DIV align=3Dleft class=3DOutlookMessageHeader dir=3Dltr><FONT = face=3DTahoma=20 size=3D2>-----Original Message-----<BR><B>From:</B> TechNet=20 [mailto:[log in to unmask]]<B>On Behalf Of </B>Ted Stern<BR><B>Sent:</B> = Friday,=20 April 26, 2002 11:47 AM<BR><B>To:</B> = [log in to unmask]<BR><B>Subject:</B> Re:=20 [TN] test for film residue<BR><BR></DIV></FONT>Steve:=20 <P>Another potential source of "residue" on copper surfaces = during dry=20 film stripping is absorption of oils - often attributable to antifoam = and/or=20 excess use of antifoam. <BR>Because copper is very oleophilic, = minimal=20 contamination may be problematic (including fingerprints) and can = contribute=20 to a variety of post strip processing problems; incomplete final = etching=20 ("copper spots") being one of the more common defects. The = methods=20 suggested by Rudy would detect this problem.=20 <P>As a severe (and unusual) example of oil contamination, we once = encountered=20 a customer employing compressed air agitation to dislodge accumulated = dry film=20 particulate in the corners of the dry film stripper spray sump. = The air=20 was introduced when the line was idle to improve continuous dry = film=20 particulate filtration. The customer had been employing = the=20 process for quite some time when random copper spots began to be=20 observed. If the stripper was replaced, the problem disappeared; = only to=20 reoccur in 1-2 days. To make a long story short, it was = determined=20 (after eliminating anti-foam, checking for tin in the bath and on = panels,=20 addressing copper oxidation, examining rinse water quality, dry film = leaching=20 in the alkaline etch, etc.) a leaking seal in the air compressor was=20 contaminating the stripper sump with minute volumes of oil, but enough = to=20 contaminate the copper surface and inhibit alkaline etching.=20 <P>Regards, <BR>Ted=20 <P>Rudy Sedlak wrote:=20 <BLOCKQUOTE TYPE=3D"CITE"><FONT face=3DArial><FONT size=3D-1>In a = message dated=20 4.25.02 12:23:23 PM Pacific Daylight Time, [log in to unmask] writes:</FONT></FONT> <BR> <BR> =20 <BLOCKQUOTE=20 style=3D"BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; = MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"=20 TYPE=3D"CITE"><FONT face=3DArial><FONT size=3D-1>Does anyone know of = a test to=20 look for film/stripper residue after copper</FONT></FONT> = <BR><FONT=20 face=3DArial><FONT size=3D-1>stripping.</FONT></FONT></BLOCKQUOTE> <P><FONT face=3DArial><FONT size=3D-1>Assume you mean after = stripping film from=20 Copper?</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Stripper residue is a tough = one, and not=20 real likely to be an issue.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Tarnish could be another issue = that is=20 very difficult to test for except by sight. Depending on = stripper, this could be significant....the clue is, if the problem = gets=20 worse as the stripper chemistry gets older, it is quite possibly=20 tarnish...</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Film residue is the most = likely=20 residue. One way to test that is a good test, but, can make = your test=20 board need rework is to drop on an immersion plating solution. = Two=20 different ones are common. Some people use immersion Tin to = test if=20 the surface is clean. A drop should plate uniformly, and=20 adherently. Another test is to drop on Silver Nitrate=20 solution...usually use the stuff that is used for titration in the=20 lab. The surface should essentially immediately turn black, = and it=20 should be adherent.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Another residue problem that = can occur,=20 and especially in old stripper chemistry, is immersion Tin = residues....this=20 does not relate to the test above. Rather, your stripper = chemistry can=20 pickup Tin from the oxide on the plating on outerlayers, and = redeposit this=20 on the Copper next to it. The potential for this problem = is=20 magnified tremendously if you strip in a tank, rather than = exclusively in=20 sprays, and can be strongly affected by the condition of the Tin = plating=20 solution. If your Tin electroplating solution looks very = milky, this=20 is disperse Tin oxide, which co-deposits with the Tin metal, then = easily=20 dissolves in certain kinds of stripper chemistry, and = redeposits,=20 sometimes even is sprays, on the adjacent Copper.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>The film residues have become = an especial=20 problem in recent years, as the new generation of photoresists, = which stick=20 VERY well, require specially formulated types of stripper=20 chemistry.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>I probably have told you more = than you=20 want to know, but, in case I haven't, you can call me to discuss=20 it.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Rudy Sedlak</FONT></FONT> = <BR><FONT=20 face=3DArial><FONT size=3D-1>RD Chemical Company=20 650-962-8004</FONT></FONT></P></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML> ------=_NextPart_000_08F5_01C1ED34.88AD36E0-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 15:13:56 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Steve Kelly <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Steve Kelly <[log in to unmask]> Subject: Re: test for film residue X-To: Hinners Hans M Civ WRALC/LUGE <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_08FB_01C1ED34.FC8C4CE0" This is a multi-part message in MIME format. ------=_NextPart_000_08FB_01C1ED34.FC8C4CE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Water break to us does not seem sensitive enough especially when we are looking at 50-75 micron lines and spaces - will check out the UV light idea. Thanks. Steve Kelly -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Hinners Hans M Civ WRALC/LUGE Sent: Friday, April 26, 2002 1:05 PM To: [log in to unmask] Subject: Re: [TN] test for film residue Hi Steve, You might try looking at the panels under UV light or a water break test. Hans ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Hans M. Hinners Electronics Engineer Warner Robins - Air Logistics Center (WR-ALC/LUGE) 226 Cochran Street Robins AFB GA 31098-1622 mailto:[log in to unmask] Com: (478) 926 - 5224 Fax: (478) 926 - 4911 DSN Prefix: 468 -----Original Message----- From: Ted Stern [mailto:[log in to unmask]] Sent: Friday, April 26, 2002 11:47 AM To: [log in to unmask] Subject: Re: [TN] test for film residue Steve: Another potential source of "residue" on copper surfaces during dry film stripping is absorption of oils - often attributable to antifoam and/or excess use of antifoam. Because copper is very oleophilic, minimal contamination may be problematic (including fingerprints) and can contribute to a variety of post strip processing problems; incomplete final etching ("copper spots") being one of the more common defects. The methods suggested by Rudy would detect this problem. As a severe (and unusual) example of oil contamination, we once encountered a customer employing compressed air agitation to dislodge accumulated dry film particulate in the corners of the dry film stripper spray sump. The air was introduced when the line was idle to improve continuous dry film particulate filtration. The customer had been employing the process for quite some time when random copper spots began to be observed. If the stripper was replaced, the problem disappeared; only to reoccur in 1-2 days. To make a long story short, it was determined (after eliminating anti-foam, checking for tin in the bath and on panels, addressing copper oxidation, examining rinse water quality, dry film leaching in the alkaline etch, etc.) a leaking seal in the air compressor was contaminating the stripper sump with minute volumes of oil, but enough to contaminate the copper surface and inhibit alkaline etching. Regards, Ted Rudy Sedlak wrote: In a message dated 4.25.02 12:23:23 PM Pacific Daylight Time, [log in to unmask] writes: Does anyone know of a test to look for film/stripper residue after copper stripping. Assume you mean after stripping film from Copper? Stripper residue is a tough one, and not real likely to be an issue. Tarnish could be another issue that is very difficult to test for except by sight. Depending on stripper, this could be significant....the clue is, if the problem gets worse as the stripper chemistry gets older, it is quite possibly tarnish... Film residue is the most likely residue. One way to test that is a good test, but, can make your test board need rework is to drop on an immersion plating solution. Two different ones are common. Some people use immersion Tin to test if the surface is clean. A drop should plate uniformly, and adherently. Another test is to drop on Silver Nitrate solution...usually use the stuff that is used for titration in the lab. The surface should essentially immediately turn black, and it should be adherent. Another residue problem that can occur, and especially in old stripper chemistry, is immersion Tin residues....this does not relate to the test above. Rather, your stripper chemistry can pickup Tin from the oxide on the plating on outerlayers, and redeposit this on the Copper next to it. The potential for this problem is magnified tremendously if you strip in a tank, rather than exclusively in sprays, and can be strongly affected by the condition of the Tin plating solution. If your Tin electroplating solution looks very milky, this is disperse Tin oxide, which co-deposits with the Tin metal, then easily dissolves in certain kinds of stripper chemistry, and redeposits, sometimes even is sprays, on the adjacent Copper. The film residues have become an especial problem in recent years, as the new generation of photoresists, which stick VERY well, require specially formulated types of stripper chemistry. I probably have told you more than you want to know, but, in case I haven't, you can call me to discuss it. Rudy Sedlak RD Chemical Company 650-962-8004 ------=_NextPart_000_08FB_01C1ED34.FC8C4CE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 5.00.3315.2870" name=3DGENERATOR></HEAD> <BODY> <DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN = class=3D750461219-26042002>Water=20 break to us does not seem sensitive enough especially when we are = looking at=20 50-75 micron lines and spaces - will check out the UV light idea. = Thanks. Steve=20 Kelly</SPAN></FONT></DIV> <BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px"> <DIV align=3Dleft class=3DOutlookMessageHeader dir=3Dltr><FONT = face=3DTahoma=20 size=3D2>-----Original Message-----<BR><B>From:</B> TechNet=20 [mailto:[log in to unmask]]<B>On Behalf Of </B>Hinners Hans M Civ=20 WRALC/LUGE<BR><B>Sent:</B> Friday, April 26, 2002 1:05 = PM<BR><B>To:</B>=20 [log in to unmask]<BR><B>Subject:</B> Re: [TN] test for film=20 residue<BR><BR></DIV></FONT> <DIV><SPAN class=3D599240317-26042002><FONT color=3D#0000ff>Hi=20 Steve,</FONT></SPAN></DIV> <DIV><SPAN class=3D599240317-26042002><FONT=20 color=3D#0000ff></FONT></SPAN> </DIV> <DIV><SPAN class=3D599240317-26042002><FONT color=3D#0000ff>You might = try looking=20 at the panels under UV light or a water break = test.</FONT></SPAN></DIV> <DIV><SPAN class=3D599240317-26042002><FONT=20 color=3D#0000ff></FONT></SPAN> </DIV> <DIV><SPAN class=3D599240317-26042002><FONT=20 color=3D#0000ff>Hans</FONT></SPAN></DIV> <DIV><SPAN class=3D599240317-26042002><FONT = color=3D#0000ff></FONT><BR><FONT=20 face=3DVerdana>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</FONT> = <BR><FONT=20 face=3DVerdana>Hans M. Hinners</FONT> <BR><FONT = face=3DVerdana>Electronics=20 Engineer</FONT> <BR><FONT face=3DVerdana>Warner Robins - Air Logistics = Center=20 (WR-ALC/LUGE)</FONT> <BR><FONT face=3DVerdana>226 Cochran = Street</FONT>=20 <BR><FONT face=3DVerdana>Robins AFB GA 31098-1622</FONT> </DIV> <DIV> <P><FONT face=3DVerdana><A=20 = href=3D"mailto:[log in to unmask]">mailto:[log in to unmask] mil</A></FONT>=20 </P> <P><FONT face=3DVerdana>Com: (478) 926 - 5224</FONT> <BR><FONT=20 face=3DVerdana>Fax: (478) 926 - 4911</FONT> <BR><FONT = face=3DArial=20 size=3D2>DSN Prefix: 468</FONT> </P></SPAN></DIV> <BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px"> <DIV align=3Dleft class=3DOutlookMessageHeader dir=3Dltr><FONT = face=3DTahoma=20 size=3D2>-----Original Message-----<BR><B>From:</B> Ted Stern=20 [mailto:[log in to unmask]]<BR><B>Sent:</B> Friday, April 26, 2002 = 11:47=20 AM<BR><B>To:</B> [log in to unmask]<BR><B>Subject:</B> Re: [TN] test = for film=20 residue<BR><BR></FONT></DIV>Steve:=20 <P>Another potential source of "residue" on copper surfaces = during dry=20 film stripping is absorption of oils - often attributable to = antifoam and/or=20 excess use of antifoam. <BR>Because copper is very oleophilic, = minimal=20 contamination may be problematic (including fingerprints) and can = contribute=20 to a variety of post strip processing problems; incomplete final = etching=20 ("copper spots") being one of the more common defects. The = methods=20 suggested by Rudy would detect this problem.=20 <P>As a severe (and unusual) example of oil contamination, we once=20 encountered a customer employing compressed air agitation to = dislodge=20 accumulated dry film particulate in the corners of the dry film = stripper=20 spray sump. The air was introduced when the line was = idle to=20 improve continuous dry film particulate filtration. The = customer=20 had been employing the process for quite some time when random = copper spots=20 began to be observed. If the stripper was replaced, the = problem=20 disappeared; only to reoccur in 1-2 days. To make a long story = short,=20 it was determined (after eliminating anti-foam, checking for tin in = the bath=20 and on panels, addressing copper oxidation, examining rinse water = quality,=20 dry film leaching in the alkaline etch, etc.) a leaking seal in the = air=20 compressor was contaminating the stripper sump with minute volumes = of oil,=20 but enough to contaminate the copper surface and inhibit alkaline = etching.=20 <P>Regards, <BR>Ted=20 <P>Rudy Sedlak wrote:=20 <BLOCKQUOTE TYPE=3D"CITE"><FONT face=3DArial><FONT size=3D-1>In a = message dated=20 4.25.02 12:23:23 PM Pacific Daylight Time, [log in to unmask] writes:</FONT></FONT> <BR> <BR> =20 <BLOCKQUOTE=20 style=3D"BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; = MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"=20 TYPE=3D"CITE"><FONT face=3DArial><FONT size=3D-1>Does anyone know = of a test to=20 look for film/stripper residue after copper</FONT></FONT> = <BR><FONT=20 face=3DArial><FONT = size=3D-1>stripping.</FONT></FONT></BLOCKQUOTE> <P><FONT face=3DArial><FONT size=3D-1>Assume you mean after = stripping film=20 from Copper?</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Stripper residue is a tough = one, and not=20 real likely to be an issue.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Tarnish could be another = issue that is=20 very difficult to test for except by sight. Depending = on=20 stripper, this could be significant....the clue is, if the problem = gets=20 worse as the stripper chemistry gets older, it is quite possibly=20 tarnish...</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Film residue is the most = likely=20 residue. One way to test that is a good test, but, can make = your=20 test board need rework is to drop on an immersion plating = solution. =20 Two different ones are common. Some people use immersion Tin = to test=20 if the surface is clean. A drop should plate uniformly, and=20 adherently. Another test is to drop on Silver Nitrate=20 solution...usually use the stuff that is used for titration in the = lab. The surface should essentially immediately turn black, = and it=20 should be adherent.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Another residue problem that = can occur,=20 and especially in old stripper chemistry, is immersion Tin=20 residues....this does not relate to the test above. Rather, = your=20 stripper chemistry can pickup Tin from the oxide on the plating on = outerlayers, and redeposit this on the Copper next to = it. The=20 potential for this problem is magnified tremendously if you strip = in a=20 tank, rather than exclusively in sprays, and can be strongly = affected by=20 the condition of the Tin plating solution. If your Tin=20 electroplating solution looks very milky, this is disperse Tin = oxide,=20 which co-deposits with the Tin metal, then easily dissolves in = certain=20 kinds of stripper chemistry, and redeposits, sometimes even = is=20 sprays, on the adjacent Copper.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>The film residues have = become an=20 especial problem in recent years, as the new generation of = photoresists,=20 which stick VERY well, require specially formulated types of = stripper=20 chemistry.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>I probably have told you = more than you=20 want to know, but, in case I haven't, you can call me to discuss=20 it.</FONT></FONT>=20 <P><FONT face=3DArial><FONT size=3D-1>Rudy Sedlak</FONT></FONT> = <BR><FONT=20 face=3DArial><FONT size=3D-1>RD Chemical Company=20 = 650-962-8004</FONT></FONT></P></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BO= DY></HTML> ------=_NextPart_000_08FB_01C1ED34.FC8C4CE0-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 14:51:28 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Microvias and rigid-flex in one board shop? X-To: [log in to unmask] Terri, Don't mean to barge in like this but in the "good old" days of wine, roses, and the MX missile system as line was drawn in the sand, or rigid flex as it was. The MX never flew because it had a total of 79 layers of rigid flex circuitry. One supporting board had 22 layers and continually failed. It delaminated in several ways and areas. TMA analysis revealed delamination way below expectations due to the acrylic adhesive used then. Later, after the program was scrapped, folks like Marty Jawitz (anyone remember Marty) at Litton Guidance Systems came up with a requirement limiting all rigid flex designs to 11 layers. Have some pretty ugly pictures from that era. Probably you and others have answers overcoming the adhesive problem, cold flowing at room temperature (Tg of about 70 or so F.). Sure like to get updated on what those answers might be. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 16:10:03 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Roger Stoops <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Roger Stoops <[log in to unmask]> Subject: Re: 0402 stencil apperture design MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" If memory serves me right (and it normally does not), there was an article published some years ago that championed oval pads for 0402s. I want to say somewhere around '92 or '93. (0201s were probably new at that time to the masses.) I want to say that it was Motorola(tm) that did the studies, and oval pads and stencil apertures seemed to solve many manufacturing problems for them. I'll have to rummage through my files one day and find it. Can not wait until I get to try my hand at some of that itty-bitty stuff, jealous of those that do... Best Regards, Roger M. Stoops, CID [log in to unmask] TRIMBLE NAVIGATION LIMITED Engineering and Construction Division 5475 Kellenburger Rd. Dayton, OH 45424-1099 USA Telephone: 937 233 8921 800 538 7800 ext. 288 Facsimile: 937 233 7511 http://www.trimble.com -----Original Message----- From: Ahne Oosterhof [mailto:[log in to unmask]] Sent: Friday, April 26, 2002 1:54 PM To: [log in to unmask] Subject: Re: [TN] 0402 stencil aperture design Hi Peter, At Plexus they have published a rather extensive report on the causes of tombstoning. It included some remarks on the incidence of solder balls. Both problem areas are partially caused by pad design on the board and aperture design in stencils. (Some say the most significant factors for tombstoning are pick-and-place accuracy and oven temperature profile.) To minimize tombstoning the report indicates that pad design has a minimal impact when using 0402-s, but for 0201-s you want to stay close to the 'normal' size for pad design. To minimize solder balls it is recommended to change stencil apertures to home plates. My personal preference (and that of some of our customers) is to change the aperture to an oval, which has the effect of reducing excess solder in all four corners of the pads. Sometimes in addition the overall size is reduced by 1 or 2 mil. An additional advantage is that the OVAL is a Gerber shape improving data compactness, data sharing and interpretation reliability and it means that for a single component there are no 'left' and 'right' or 'top' and 'bottom' apertures (or D-codes). Have fun, Ahne. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of peter lee Sent: Friday, April 26, 2002 07:58 To: [log in to unmask] Subject: [TN] 0402 stencil apperture design Has anyone used a "D"-shape 0402 land pattern on their design? The pad dimensions are 18x19mils (semi-circle on the other ends) and 16mil spacing between the 2 pads. What would be the stencil apperture recommendation for the above design? We've used round pads for 0402s and 15% apperture reduction before. Rgds, Peter __________________________________________________ Do You Yahoo!? Yahoo! Games - play chess, backgammon, pool and more http://games.yahoo.com/ ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 13:27:44 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Crepeau, Phil" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Crepeau, Phil" <[log in to unmask]> Subject: Re: Microvias and rigid-flex in one board shop? X-To: [log in to unmask] MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" hi, you might be interested in the picture at http://www.af.mil/photos/May1998/0430peacek.jpg there might not have been rigid-flex circuits in it, but it is 'flying'. and, i hope we won't have to quibble about 'mx,'being renamed 'peacekeeper'. phil -----Original Message----- From: Earl Moon [mailto:[log in to unmask]] Sent: Friday, April 26, 2002 12:51 PM To: [log in to unmask] Subject: Re: [TN] Microvias and rigid-flex in one board shop? Terri, Don't mean to barge in like this but in the "good old" days of wine, roses, and the MX missile system as line was drawn in the sand, or rigid flex as it was. The MX never flew because it had a total of 79 layers of rigid flex circuitry. One supporting board had 22 layers and continually failed. It delaminated in several ways and areas. TMA analysis revealed delamination way below expectations due to the acrylic adhesive used then. Later, after the program was scrapped, folks like Marty Jawitz (anyone remember Marty) at Litton Guidance Systems came up with a requirement limiting all rigid flex designs to 11 layers. Have some pretty ugly pictures from that era. Probably you and others have answers overcoming the adhesive problem, cold flowing at room temperature (Tg of about 70 or so F.). Sure like to get updated on what those answers might be. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 15:37:13 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Microvias and rigid-flex in one board shop? X-To: [log in to unmask] She's a beauty and doesn't appear to be coming down on friendlies as the MX often appeared to be. Trident never used one ounce of flex or rigid flex in any of it's multiple warhead systems. I can't remember a failure from the date Polaris started it all, or was that the second one after? Always been a flex advocate since the early '70's. Just gotta know where to draw the line and know what works under what conditions. Hell, it's the same old story - a fight for love and glory and justifying one's existence and the ability to wipe out someone else's. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 14:13:48 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Sean Hill <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Sean Hill <[log in to unmask]> Subject: Re: Microvias and rigid-flex in one board shop? X-To: "Houston, Terri" <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain Terri, Try Cirrex Corp in Santa Clara,CA 408-988-3980 -----Original Message----- From: Houston, Terri [mailto:[log in to unmask]] Sent: Friday, April 26, 2002 9:36 AM To: [log in to unmask] Subject: [TN] Microvias and rigid-flex in one board shop? Hi folks, I'm looking for a board shop with actual experience in building a 14+ layer, rigid-flex board that has microvias in the rigid sections. It seems the combination of these two features is hard to find at one supplier, even though I'm only looking for a small quantity of prototypes. Any suggestions would be greatly appreciated--even self-marketing would be accepted (off TechNet, please). Thanks in advance, Terri ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 16:51:16 -0500 Reply-To: [log in to unmask] Sender: TechNet <[log in to unmask]> From: Seth Goodman <[log in to unmask]> Subject: Re: Philips Signetics SCC 68692 Dual UART X-To: Dennis Petrosky <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000D_01C1ED42.94B55220" This is a multi-part message in MIME format. ------=_NextPart_000_000D_01C1ED42.94B55220 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi Dennis, I haven't used this part since around the date code on your earlier ones, but this sure has the smell of a timing problem. It could be that Philips changed the process the die is made on, which can easily change the timing and/or the driver output impedance. Either of these can lead to setup violations or bus contention. Assuming that the original designer did his homework on the timing, I'd look for changes to the timing specs or output drive capability of the newer chips. Another possibility that is less palatable is that there was a timing problem all along, but you have managed to stay just this side of failure until the part changed slightly. This is harder to find since you have to review the whole timing analysis. Has anything else on this bus changed, such as bus loading (more memory) or a change in the decoding scheme? Assuming there is a processor in this system, has the die revision changed on that? As a final thought, check the errata sheets on the older UART's. It is possible that Philips fixed some bugs in the die that your software people originally had to work around and the workaround is now causing the problem. Good luck! Regards, Seth Goodman Goodman Associates, LLC tel 608.833.9933 fax 608.833.9966 -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Dennis Petrosky Sent: Thursday, April 25, 2002 9:54 AM To: [log in to unmask] Subject: [TN] Philips Signetics SCC 68692 Dual UART For the Philips Signetics Dual UART, P/N SCC 68692 has anyone seen the following problems with newer parts. We don't seem to have problems with older parts, 1994 date code. We have the problems with newer parts 2000 and 2001 parts. We don't know where the date change actually occurred. The problems don't happen 100% of the time on the new parts. Temperature seems to affect it. The problem occurrs more often at higher temperatures. The problems are: 1. The baud rate is wrong by a factor of 16. If you select 19.2K baud for example, the part tries for 307K baud. 2. The part drops bits on the output data and requires 3 tries on any RS232 input to get the correct character. For instance, if you are pressing a series of 1's on the keyboard, then press 2, it will take 3 presses of 2 before the 2 is actually outputed on the UART. The problem seems to be in changing bits on the output word from low to high. If a bit is high and is intended to be high, it will stay high. If a bit is low and is intended to stay low, it will stay low. If a bit is high and needs to go low, it will go low on the first key press. If a bit is low and needs to go high, it will take 3 key presses to go high. Dennis Petrosky Circuit Card Manufacturing Engineer 607-763-4745 ------=_NextPart_000_000D_01C1ED42.94B55220 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"> <META content=3D"MSHTML 6.00.2715.400" name=3DGENERATOR></HEAD> <BODY> <DIV><SPAN class=3D564533021-26042002><FONT face=3DArial size=3D2>Hi=20 Dennis,</FONT></SPAN></DIV> <DIV><FONT face=3DArial><FONT size=3D2><SPAN = class=3D564533021-26042002><FONT=20 face=3DArial size=3D2></FONT></SPAN></FONT></FONT> </DIV> <DIV><SPAN class=3D564533021-26042002><FONT face=3DArial size=3D2>I = haven't used this=20 part since around the date code on your earlier ones, but this sure has = the=20 smell of a timing problem. It could be that Philips changed the = process=20 the die is made on, which can easily change the timing and/or the driver = output=20 impedance. Either of these can lead to setup violations or bus=20 contention. Assuming that the original designer did his homework = on the=20 timing, I'd look for changes to the timing specs or output drive = capability of=20 the newer chips. Another possibility that is less palatable is = that there=20 was a timing problem all along, but you have managed to stay just this = side of=20 failure until the part changed slightly. This is harder to find = since you=20 have to review the whole timing analysis.</FONT></SPAN></DIV> <DIV><FONT face=3DArial><FONT size=3D2><SPAN = class=3D564533021-26042002><FONT=20 face=3DArial size=3D2></FONT></SPAN></FONT></FONT> </DIV> <DIV><SPAN class=3D564533021-26042002><FONT face=3DArial size=3D2>Has = anything else on=20 this bus changed, such as bus loading (more memory) or a change in the = decoding=20 scheme? Assuming there is a processor in this system, has the die = revision=20 changed on that? As a final thought, check the errata sheets on = the older=20 UART's. It is possible that Philips fixed some bugs in the die = that your=20 software people originally had to work around and the workaround is now = causing=20 the problem.</FONT></SPAN></DIV> <DIV><FONT face=3DArial><FONT size=3D2><SPAN = class=3D564533021-26042002><FONT=20 face=3DArial size=3D2></FONT></SPAN></FONT></FONT> </DIV> <DIV><SPAN class=3D564533021-26042002><FONT face=3DArial size=3D2>Good=20 luck!</FONT></SPAN></DIV> <DIV><FONT face=3DArial><FONT size=3D2><SPAN=20 class=3D564533021-26042002></SPAN></FONT></FONT><SPAN=20 class=3D564533021-26042002><FONT face=3DArial color=3D#0000ff=20 size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Regards,<BR><BR>Seth Goodman<BR>Goodman = Associates,=20 LLC<BR>tel 608.833.9933<BR>fax 608.833.9966<BR></FONT></DIV> <DIV></SPAN> </DIV> <BLOCKQUOTE=20 style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px = solid"> <DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT = face=3DTahoma=20 size=3D2>-----Original Message-----<BR><B>From:</B> TechNet=20 [mailto:[log in to unmask]]<B>On Behalf Of </B>Dennis = Petrosky<BR><B>Sent:</B>=20 Thursday, April 25, 2002 9:54 AM<BR><B>To:</B>=20 [log in to unmask]<BR><B>Subject:</B> [TN] Philips Signetics SCC 68692 = Dual=20 UART<BR><BR></FONT></DIV><BR><FONT face=3Dsans-serif size=3D2>For the = Philips=20 Signetics Dual UART, P/N SCC 68692 has anyone seen the following = problems with=20 newer parts. We don't seem to have problems with older parts, = 1994 date=20 code. We have the problems with newer parts 2000 and 2001 parts. = We don't know where the date change actually occurred. The = problems don't happen 100% of the time on the new parts. = Temperature=20 seems to affect it. The problem occurrs more often at higher=20 temperatures.</FONT> <BR><BR><FONT face=3Dsans-serif size=3D2>The = problems=20 are:</FONT> <BR><FONT face=3Dsans-serif size=3D2>1. The baud = rate is wrong=20 by a factor of 16. If you select 19.2K baud for example, the = part tries=20 for 307K baud.</FONT> <BR><BR><FONT face=3Dsans-serif size=3D2>2. = The part=20 drops bits on the output data and requires 3 tries on any RS232 input = to get=20 the correct character. For instance, if you are pressing a = series of 1's=20 on the keyboard, then press 2, it will take 3 presses of 2 before the = 2 is=20 actually outputed on the UART. The problem seems to be in = changing bits=20 on the output word from low to high. If a bit is high and is = intended to=20 be high, it will stay high. If a bit is low and is intended to = stay low,=20 it will stay low. If a bit is high and needs to go low, it will = go low=20 on the first key press. If a bit is low and needs to go high, it = will=20 take 3 key presses to go high.</FONT> <BR><BR><BR><BR><FONT = face=3Dsans-serif=20 size=3D2>Dennis Petrosky<BR>Circuit Card Manufacturing=20 Engineer<BR>607-763-4745</FONT></BLOCKQUOTE></BODY></HTML> ------=_NextPart_000_000D_01C1ED42.94B55220-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 18:18:06 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, David Fish <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: David Fish <[log in to unmask]> Subject: Re: Immersion Gold Vs Immersion Tin for 0201 landpatterns X-To: [log in to unmask] MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Imm tin at 44 micron!!! Wow, that seems very thick. We expect minimum thickness of 0.65 microns with a maximum thickness of 1.5 microns. Dave Fish ----- Original Message ----- From: "Tuan Bui" <[log in to unmask]> To: <[log in to unmask]> Sent: Friday, April 26, 2002 11:05 AM Subject: Re: [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns > Hi George, > > The Immersion Gold process that the PCB vendor stated that the Immersion > gold (7-10 micron) over nickel over copper. The Immersion Tin process, as > you have mentioned, is about 44 micron. It is good to hear that the > immersion tin process can be easily/inexpensive reworked when its shelf > live expires. > > BTW, thanks for your input. > > Tuan Bui > Proc Dev Eng > Conexant Systems Inc. > > > > George Milad > <[log in to unmask]> To: [log in to unmask] > Sent by: TechNet cc: > <[log in to unmask]> Subject: Re: [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns > > > 04/26/2002 08:47 > AM > Please respond to > "TechNet E-Mail > Forum."; Please > respond to Gmilad > > > > > > > Tuan, > Could you clarify the "Immersion Gold" process that you are using. Is it > Immersion gold over copper or it immersion gold over nickel over copper? > > Immersion Tin is a viable alternative for your application. However the > thickness required will much higher than the 7 - 8 uins that you are > presently using for gold, more like 30 - 40 uins. Tin is realtive > inexpensive and can be easily reworked if shelf life becomes an issue. > > George Milad > HDI Consulting > Chairman IPC Plating Committee. > > -------------------------------------------------------------------------- ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > -------------------------------------------------------------------------- ------- > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 00:22:07 +0200 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "D.Terstegge" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "D.Terstegge" <[log in to unmask]> Subject: Re: 0402 stencil apperture design X-To: Roger Stoops <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0011_01C1ED81.90C861E0" This is a multi-part message in MIME format. ------=_NextPart_000_0011_01C1ED81.90C861E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable The plexus report is published in '98 and is still pretty up-to-date, = but it doesn't have much info about stencil apertures (but it's still = interesting).=20 The report has disappeared from the plexus website, but you can still = download it at http://www.smtinfo.net/docs/tombstoning.pdf B.T.W. I'd say that even now 0201's are new to the masses, don't you = think so Roger ? Daan Terstegge http://www.smtinfo.net ----- Original Message -----=20 From: Roger Stoops=20 To: [log in to unmask] Sent: Friday, April 26, 2002 10:10 PM Subject: Re: [TN] 0402 stencil apperture design If memory serves me right (and it normally does not), there was an = article published some years ago that championed oval pads for 0402s. I want = to say somewhere around '92 or '93. (0201s were probably new at that time to = the masses.) I want to say that it was Motorola(tm) that did the studies, = and oval pads and stencil apertures seemed to solve many manufacturing = problems for them. I'll have to rummage through my files one day and find it. Can not wait until I get to try my hand at some of that itty-bitty = stuff, jealous of those that do... Best Regards, Roger M. Stoops, CID [log in to unmask] TRIMBLE NAVIGATION LIMITED Engineering and Construction Division 5475 Kellenburger Rd. Dayton, OH 45424-1099 USA Telephone: 937 233 8921 800 538 7800 ext. 288 Facsimile: 937 233 7511 http://www.trimble.com -----Original Message----- From: Ahne Oosterhof [mailto:[log in to unmask]] Sent: Friday, April 26, 2002 1:54 PM To: [log in to unmask] Subject: Re: [TN] 0402 stencil aperture design Hi Peter, At Plexus they have published a rather extensive report on the causes = of tombstoning. It included some remarks on the incidence of solder = balls. Both problem areas are partially caused by pad design on the board and = aperture design in stencils. (Some say the most significant factors for = tombstoning are pick-and-place accuracy and oven temperature profile.) To minimize tombstoning the report indicates that pad design has a = minimal impact when using 0402-s, but for 0201-s you want to stay close to the 'normal' size for pad design. To minimize solder balls it is recommended to change stencil apertures = to home plates. My personal preference (and that of some of our = customers) is to change the aperture to an oval, which has the effect of reducing = excess solder in all four corners of the pads. Sometimes in addition the = overall size is reduced by 1 or 2 mil. An additional advantage is that the OVAL is a Gerber shape improving = data compactness, data sharing and interpretation reliability and it means = that for a single component there are no 'left' and 'right' or 'top' and = 'bottom' apertures (or D-codes). Have fun, Ahne. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of peter lee Sent: Friday, April 26, 2002 07:58 To: [log in to unmask] Subject: [TN] 0402 stencil apperture design Has anyone used a "D"-shape 0402 land pattern on their design? The pad dimensions are 18x19mils (semi-circle on the other ends) and 16mil spacing between the 2 pads. What would be the stencil apperture recommendation for the above design? We've used round pads for 0402s and 15% apperture reduction before. Rgds, Peter __________________________________________________ Do You Yahoo!? Yahoo! Games - play chess, backgammon, pool and more http://games.yahoo.com/ = -------------------------------------------------------------------------= --- ----- Technet Mail List provided as a free service by IPC using LISTSERV = 1.8d To unsubscribe, send a message to [log in to unmask] with following text = in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to = [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: = http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for = additional information, or contact Keach Sasamori at [log in to unmask] or = 847-509-9700 ext.5315 = -------------------------------------------------------------------------= --- ----- = -------------------------------------------------------------------------= --- ----- Technet Mail List provided as a free service by IPC using LISTSERV = 1.8d To unsubscribe, send a message to [log in to unmask] with following text = in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to = [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: = http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for = additional information, or contact Keach Sasamori at [log in to unmask] or = 847-509-9700 ext.5315 = -------------------------------------------------------------------------= --- ----- = -------------------------------------------------------------------------= -------- Technet Mail List provided as a free service by IPC using LISTSERV = 1.8d To unsubscribe, send a message to [log in to unmask] with following text = in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to = [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to = [log in to unmask]: SET Technet Digest Search the archives of previous posts at: = http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for = additional information, or contact Keach Sasamori at [log in to unmask] or = 847-509-9700 ext.5315 = -------------------------------------------------------------------------= -------- ------=_NextPart_000_0011_01C1ED81.90C861E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 5.50.4134.600" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV>The plexus report is published in '98 and is still pretty = up-to-date,=20 but it doesn't have much info about stencil apertures (but it's = still=20 interesting). </DIV> <DIV>The report has disappeared from the plexus website, but you = can still=20 download it at <A=20 href=3D"http://www.smtinfo.net/docs/tombstoning.pdf">http://www.smtinfo.n= et/docs/tombstoning.pdf</A></DIV> <DIV>B.T.W. I'd say that even now 0201's are new to the = masses, don't=20 you think so Roger ?</DIV> <DIV> </DIV> <DIV>Daan Terstegge</DIV> <DIV>http://<A href=3D"http://www.smtinfo.net">www.smtinfo.net</A></DIV> <DIV> </DIV> <BLOCKQUOTE=20 style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV> <DIV=20 style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B>=20 <A [log in to unmask] = href=3D"mailto:[log in to unmask]">Roger=20 Stoops</A> </DIV> <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A [log in to unmask] href=3D"mailto:[log in to unmask]">[log in to unmask]</A> </DIV> <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Friday, April 26, 2002 = 10:10=20 PM</DIV> <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: [TN] 0402 stencil = apperture=20 design</DIV> <DIV><BR></DIV>If memory serves me right (and it normally does not), = there was=20 an article<BR>published some years ago that championed oval pads for = 0402s. I=20 want to say<BR>somewhere around '92 or '93. (0201s were probably new = at that=20 time to the<BR>masses.) I want to say that it was Motorola(tm) = that did=20 the studies, and<BR>oval pads and stencil apertures seemed to solve = many=20 manufacturing problems<BR>for them. I'll have to rummage through = my=20 files one day and find it.<BR>Can not wait until I get to try my hand = at some=20 of that itty-bitty stuff,<BR>jealous of those that do...<BR>Best=20 Regards,<BR><BR>Roger M. Stoops, CID <A=20 = href=3D"mailto:[log in to unmask]">[log in to unmask]</A><BR>= TRIMBLE=20 NAVIGATION LIMITED<BR>Engineering and Construction Division<BR>5475=20 Kellenburger Rd.<BR>Dayton, OH =20 45424-1099 USA<BR>Telephone: 937 = 233=20 8921 800 538 = 7800 =20 ext. 288<BR>Facsimile: 937 233 7511<BR><BR><A=20 = href=3D"http://www.trimble.com">http://www.trimble.com</A><BR><BR><BR><BR= > -----Original=20 Message-----<BR>From: Ahne Oosterhof=20 [mailto:[log in to unmask]]<BR>Sent: Friday, April 26, 2002 = 1:54=20 PM<BR>To: <A=20 = href=3D"mailto:[log in to unmask]">[log in to unmask]</A><BR>Subject: &nbs= p; =20 Re: [TN] 0402 stencil aperture design<BR><BR>Hi Peter,<BR>At Plexus = they have=20 published a rather extensive report on the causes of<BR>tombstoning. = It=20 included some remarks on the incidence of solder balls. = Both<BR>problem areas=20 are partially caused by pad design on the board and aperture<BR>design = in=20 stencils. (Some say the most significant factors for = tombstoning<BR>are=20 pick-and-place accuracy and oven temperature profile.)<BR><BR>To = minimize=20 tombstoning the report indicates that pad design has a = minimal<BR>impact when=20 using 0402-s, but for 0201-s you want to stay close to the<BR>'normal' = size=20 for pad design.<BR><BR>To minimize solder balls it is recommended to = change=20 stencil apertures to<BR>home plates. My personal preference (and that = of some=20 of our customers) is<BR>to change the aperture to an oval, which has = the=20 effect of reducing excess<BR>solder in all four corners of the pads. = Sometimes=20 in addition the overall<BR>size is reduced by 1 or 2 mil.<BR><BR>An = additional=20 advantage is that the OVAL is a Gerber shape improving = data<BR>compactness,=20 data sharing and interpretation reliability and it means that<BR>for a = single=20 component there are no 'left' and 'right' or 'top' and = 'bottom'<BR>apertures=20 (or D-codes).<BR><BR>Have fun,<BR>Ahne.<BR><BR><BR>-----Original=20 Message-----<BR>From: TechNet [mailto:[log in to unmask]] On = Behalf=20 Of peter lee<BR>Sent: Friday, April 26, 2002=20 07:58<BR>To: <A=20 = href=3D"mailto:[log in to unmask]">[log in to unmask]</A><BR>Subject: &nbs= p; =20 [TN] 0402 stencil apperture design<BR><BR>Has anyone used a "D"-shape = 0402=20 land pattern on their<BR>design?<BR><BR>The pad dimensions are = 18x19mils=20 (semi-circle on the<BR>other ends) and 16mil spacing between the 2=20 pads.<BR><BR>What would be the stencil apperture recommendation = for<BR>the=20 above design? We've used round pads for 0402s and<BR>15% apperture = reduction=20 = before.<BR><BR><BR>Rgds,<BR>Peter<BR><BR><BR>____________________________= ______________________<BR>Do=20 You Yahoo!?<BR>Yahoo! Games - play chess, backgammon, pool and = more<BR><A=20 = href=3D"http://games.yahoo.com/">http://games.yahoo.com/</A><BR><BR>-----= -----------------------------------------------------------------------<B= R>-----<BR>Technet=20 Mail List provided as a free service by IPC using LISTSERV 1.8d<BR>To=20 unsubscribe, send a message to <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> with following = text=20 in<BR>the BODY (NOT the subject field): SIGNOFF Technet<BR>To = temporarily halt=20 delivery of Technet send e-mail to <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A>: SET<BR>Technet=20 NOMAIL<BR>To receive ONE mailing per day of all the posts: send e-mail = to<BR><A href=3D"mailto:[log in to unmask]">[log in to unmask]</A>: SET = Technet=20 Digest<BR>Search the archives of previous posts at: <A=20 = href=3D"http://listserv.ipc.org/archives">http://listserv.ipc.org/archive= s</A><BR>Please=20 visit IPC web site <A=20 = href=3D"http://www.ipc.org/html/forum.htm">http://www.ipc.org/html/forum.= htm</A>=20 for additional<BR>information, or contact Keach Sasamori at <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> or=20 = 847-509-9700<BR>ext.5315<BR>---------------------------------------------= -------------------------------<BR>-----<BR><BR>-------------------------= ---------------------------------------------------<BR>-----<BR>Technet=20 Mail List provided as a free service by IPC using LISTSERV 1.8d<BR>To=20 unsubscribe, send a message to <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> with following = text=20 in<BR>the BODY (NOT the subject field): SIGNOFF Technet<BR>To = temporarily halt=20 delivery of Technet send e-mail to <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A>: SET<BR>Technet=20 NOMAIL<BR>To receive ONE mailing per day of all the posts: send e-mail = to<BR><A href=3D"mailto:[log in to unmask]">[log in to unmask]</A>: SET = Technet=20 Digest<BR>Search the archives of previous posts at: <A=20 = href=3D"http://listserv.ipc.org/archives">http://listserv.ipc.org/archive= s</A><BR>Please=20 visit IPC web site <A=20 = href=3D"http://www.ipc.org/html/forum.htm">http://www.ipc.org/html/forum.= htm</A>=20 for additional<BR>information, or contact Keach Sasamori at <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> or=20 = 847-509-9700<BR>ext.5315<BR>---------------------------------------------= -------------------------------<BR>-----<BR><BR>-------------------------= --------------------------------------------------------<BR>Technet=20 Mail List provided as a free service by IPC using LISTSERV 1.8d<BR>To=20 unsubscribe, send a message to <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> with following = text=20 in<BR>the BODY (NOT the subject field): SIGNOFF Technet<BR>To = temporarily halt=20 delivery of Technet send e-mail to <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A>: SET Technet = NOMAIL<BR>To=20 receive ONE mailing per day of all the posts: send e-mail to <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A>: SET Technet=20 Digest<BR>Search the archives of previous posts at: <A=20 = href=3D"http://listserv.ipc.org/archives">http://listserv.ipc.org/archive= s</A><BR>Please=20 visit IPC web site <A=20 = href=3D"http://www.ipc.org/html/forum.htm">http://www.ipc.org/html/forum.= htm</A>=20 for additional<BR>information, or contact Keach Sasamori at <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> or 847-509-9700=20 = ext.5315<BR>-------------------------------------------------------------= --------------------</BLOCKQUOTE></BODY></HTML> ------=_NextPart_000_0011_01C1ED81.90C861E0-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Fri, 26 Apr 2002 16:19:51 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: Tuan Bui <[log in to unmask]> Subject: Re: Immersion Gold Vs Immersion Tin for 0201 landpatterns X-To: David Fish <[log in to unmask]> MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii David, I double checked the Tin thickness and you are right. 44 micron is too thick. The correct measurement is .7 microns (~ 44 micro inches) Thanks for catching that. Tuan "David Fish" <[log in to unmask] To: "TechNet E-Mail Forum." <[log in to unmask]>, <[log in to unmask]> > cc: Subject: Re: Re: [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns 04/26/2002 06:18 PM Imm tin at 44 micron!!! Wow, that seems very thick. We expect minimum thickness of 0.65 microns with a maximum thickness of 1.5 microns. Dave Fish ----- Original Message ----- From: "Tuan Bui" <[log in to unmask]> To: <[log in to unmask]> Sent: Friday, April 26, 2002 11:05 AM Subject: Re: [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns > Hi George, > > The Immersion Gold process that the PCB vendor stated that the Immersion > gold (7-10 micron) over nickel over copper. The Immersion Tin process, as > you have mentioned, is about 44 micron. It is good to hear that the > immersion tin process can be easily/inexpensive reworked when its shelf > live expires. > > BTW, thanks for your input. > > Tuan Bui > Proc Dev Eng > Conexant Systems Inc. > > > > George Milad > <[log in to unmask]> To: [log in to unmask] > Sent by: TechNet cc: > <[log in to unmask]> Subject: Re: [TN] Immersion Gold Vs Immersion Tin for 0201 landpatterns > > > 04/26/2002 08:47 > AM > Please respond to > "TechNet E-Mail > Forum."; Please > respond to Gmilad > > > > > > > Tuan, > Could you clarify the "Immersion Gold" process that you are using. Is it > Immersion gold over copper or it immersion gold over nickel over copper? > > Immersion Tin is a viable alternative for your application. However the > thickness required will much higher than the 7 - 8 uins that you are > presently using for gold, more like 30 - 40 uins. Tin is realtive > inexpensive and can be easily reworked if shelf life becomes an issue. > > George Milad > HDI Consulting > Chairman IPC Plating Committee. > > -------------------------------------------------------------------------- ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > -------------------------------------------------------------------------- ------- > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 16:30:46 +0000 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, LINO REBOREDO <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: LINO REBOREDO <[log in to unmask]> Subject: Re: FAB Question: laminate - 1 ply or 2?? Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Dear Pete, I also made myself your question time ago, my relative truth is that in all cases that you can use 2 plies used it, One ply means that the ply system resin- reinforce must be in perfect state, no fault is admitted. I never had meet an adhesion problem using one ply, but i had meet dielectrical lacks betw. layer and was due to operational asemblies fault. at the end is as we say :is not the same the double than the half regards, lino >From: Pete Jones <[log in to unmask]> >Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Pete Jones ><[log in to unmask]> >To: [log in to unmask] >Subject: [TN] FAB Question: laminate - 1 ply or 2?? >Date: Thu, 25 Apr 2002 09:55:27 -0400 > >Hello all TechNetters, > >What is the difference between using 1 ply of laminate or 2 in fab boards? > >Is there a REAL concern that 1 ply will not be sufficient electrical >insolation? Or has resins now evolved enough to make it safe to use just >one >ply? > >I deal mostly, but not exclusively, with the military and would like to >make >sure of my statement that 1 ply should be sufficient. Can I get reliable >references anywhere concerning this issue, one way or the other? > >Thanks to all participants in this discussion. > >Pete > >_________________________________________________________________ >Join the world’s largest e-mail service with MSN Hotmail. >http://www.hotmail.com > >--------------------------------------------------------------------------------- >Technet Mail List provided as a free service by IPC using LISTSERV 1.8d >To unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet >To temporarily halt delivery of Technet send e-mail to [log in to unmask]: >SET Technet NOMAIL >To receive ONE mailing per day of all the posts: send e-mail to >[log in to unmask]: SET Technet Digest >Search the archives of previous posts at: http://listserv.ipc.org/archives >Please visit IPC web site http://www.ipc.org/html/forum.htm for additional >information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 >ext.5315 >--------------------------------------------------------------------------------- _________________________________________________________________ Únase con MSN Hotmail al servicio de correo electrónico más grande del mundo. http://www.hotmail.com --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 12:42:24 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: Microvias and rigid-flex in one board shop? MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_6.280ee898.29fc2ef0_boundary" --part1_6.280ee898.29fc2ef0_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hello Terri, I can build flex with microvias. We are selective though, regarding flex that is. I would suggest the APLS flex (no adhesive) and if conventional cover coat is used to terminate after rigid area entry. This area must be no via zone. The rigid needs to be epoxy (aka FR4) [I used to be a BIG polyimide guy], don't bond your flex layers together, keep board aspect ratio below 6.5/1, microvia aspect ratios below .75/1, Silver or Tin finish. Make the build symmetrical about the vertical centerline. Prior to proto build have a mock up made for mechanical/sanity check. If I didn't go to me I would go to Pioneer (Santa Ana, CA, Ken Lee) or Cosomtronics (Irvine, CA, Dick Berger). Both these folks are HiRel flex shops and smart people that build excellent flex (my own first hand experience) BUT I do NOT know their capability of micro via technology. That is not meant to be derogatory. I have built micro via flex, it is better to get a micro via shop to build flex than a flex shop to builds micro via. Contact me if more detail/opinion is needed. Boston Brad 781 858 0783 --part1_6.280ee898.29fc2ef0_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit <HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Hello Terri,<BR> <BR> I can build flex with microvias. We are selective though, regarding flex that is. I would suggest the APLS flex (no adhesive) and if conventional cover coat is used to terminate after rigid area entry. This area must be no via zone. The rigid needs to be epoxy (aka FR4) [I used to be a BIG polyimide guy], don't bond your flex layers together, keep board aspect ratio below 6.5/1, microvia aspect ratios below .75/1, Silver or Tin finish. Make the build symmetrical about the vertical centerline. Prior to proto build have a mock up made for mechanical/sanity check.<BR> If I didn't go to me I would go to Pioneer (Santa Ana, CA, Ken Lee) or Cosomtronics (Irvine, CA, Dick Berger). Both these folks are HiRel flex shops and smart people that build excellent flex (my own first hand experience) BUT I do NOT know their capability of micro via technology. That is not meant to be derogatory.<BR> I have built micro via flex, it is better to get a micro via shop to build flex than a flex shop to builds micro via.<BR> <BR> Contact me if more detail/opinion is needed.<BR> <BR> Boston Brad<BR> 781 858 0783<BR> <BR> </FONT></HTML> --part1_6.280ee898.29fc2ef0_boundary-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 12:57:31 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: Microvias and rigid-flex in one board shop? MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_152.d072494.29fc327b_boundary" --part1_152.d072494.29fc327b_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Moon, I meet many people involved in the dreaded "MX flex." It did go through some extensive "envelope" changes, many of which I was not privy to in that they were before my time. I was heavily involved in the final end product and can unequivocally state it is a sound robust design that is indeed "failsafe." I have worked a great many Defense applications and I say to this day I have never worked with a more professional group or have more certainty of performance than the MX; PeaceKeeper. BB --part1_152.d072494.29fc327b_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit <HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Moon,<BR> <BR> I meet many people involved in the dreaded "MX flex." It did go through some extensive "envelope" changes, many of which I was not privy to in that they were before my time. I was heavily involved in the final end product and can unequivocally state it is a sound robust design that is indeed "failsafe." I have worked a great many Defense applications and I say to this day I have never worked with a more professional group or have more certainty of performance than the MX; PeaceKeeper.<BR> <BR> BB </FONT></HTML> --part1_152.d072494.29fc327b_boundary-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 13:05:53 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: Rick Fudalewski <[log in to unmask]> Subject: HDIC MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_84.27714f08.29fc3471_boundary" --part1_84.27714f08.29fc3471_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Question does the term "HDIC" stand for high density integrated circuits? --part1_84.27714f08.29fc3471_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit <HTML><FONT FACE=arial,helvetica><FONT SIZE=2>Question <BR> <BR>does the term "HDIC" stand for high density integrated circuits?</FONT></HTML> --part1_84.27714f08.29fc3471_boundary-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 12:02:03 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Microvias and rigid-flex in one board shop? X-To: [log in to unmask] saunders, As you say, you were not there in the early days. However, all the folks were very professional. They just didn't have the technology early on to get the project to market as soon as they would have wished. Obviously you do and that's good for us all. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 13:29:34 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: Via Plug MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_51.1d2ad0a3.29fc39fe_boundary" --part1_51.1d2ad0a3.29fc39fe_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hello John, Via plug is one of the fastest growing requests of board buyers/users today. Mainly in the arena of electrical interconnection in the CSP or sub .8mm BGA substrates. Thermagon is a very good thermal dielectric (www.thermagon.com) and their "in-situ" hole fill may be what your looking for, although it is best used to bond PCBs to alum or copper heat plates. It can also be readily used as the dielectric system for single, double or multilayer boards. It is conventional E-glass with a modified epoxy that has 10x betterment of thermal transfer properties. We use a high silver content epoxy hole fill supplied by three different suppliers. These are all great materials but will not do a thermal transfer job very well. If it is a through PCB thermal transfer you can't beat the performance of an additional plated through hole combined with copper planes (large and or small). The challenge is where does the heat go from there and how. That is an assembly issue and volume has everything to do with appropriate configuration. I've done quite a bit of that send a reply to continue the thread. Boston Brad --part1_51.1d2ad0a3.29fc39fe_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit <HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Hello John,<BR> <BR> Via plug is one of the fastest growing requests of board buyers/users today. Mainly in the arena of electrical interconnection in the CSP or sub .8mm BGA substrates. Thermagon is a very good thermal dielectric (www.thermagon.com) and their "in-situ" hole fill may be what your looking for, although it is best used to bond PCBs to alum or copper heat plates. It can also be readily used as the dielectric system for single, double or multilayer boards. It is conventional E-glass with a modified epoxy that has 10x betterment of thermal transfer properties. We use a high silver content epoxy hole fill supplied by three different suppliers. These are all great materials but will not do a thermal transfer job very well. If it is a through PCB thermal transfer you can't beat the performance of an additional plated through hole combined with copper planes (large and or small). The challenge is where does the heat go from there and how. That is! an assembly issue and volume has everything to do with appropriate configuration. I've done quite a bit of that send a reply to continue the thread. <BR> <BR> Boston Brad </FONT></HTML> --part1_51.1d2ad0a3.29fc39fe_boundary-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 13:42:39 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: HDIC MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_15d.d0ed3b1.29fc3d0f_boundary" --part1_15d.d0ed3b1.29fc3d0f_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit High Denity InterConnects > Question > > does the term "HDIC" stand for high density integrated circuits? --part1_15d.d0ed3b1.29fc3d0f_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit <HTML><FONT FACE=arial,helvetica><FONT SIZE=2>High Denity InterConnects<BR> <BR> <BR> <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Question<BR> <BR> does the term "HDIC" stand for high density integrated circuits?</BLOCKQUOTE><BR> <BR> </FONT></HTML> --part1_15d.d0ed3b1.29fc3d0f_boundary-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sat, 27 Apr 2002 12:48:12 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Via Plug One of the best places for the heat to go is a cold wall. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 12:14:43 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, fullname <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: fullname <[log in to unmask]> Organization: DSO National Laboratories Subject: Looking for Happy Holden MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I would like to have Happy Holden's contact especially email address. Your reply would be appreciated. Regards - Wee Mei --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 13:39:38 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: Via Plug X-To: "Mcmaster, Michael" <[log in to unmask]> MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Michael, My thermal engineer assures me that the K value for copper is between 150 and 200 W/mK, but even so, your point about replacing CB100 (now CB101, by the way) with additional copper plating is a valid one, and offers much simpler, quicker and less costly PCB fabrication. The only caveat I would add is, make sure the ductility for your additional copper plating thickness is enough to avoid cracking the barrels under temperature cycling, especially if using FR4. Peter "Mcmaster, Michael" <[log in to unmask]> 26/04/2002 11:58 PM Sent by: TechNet <[log in to unmask]> Please respond to "TechNet E-Mail Forum."; Please respond to "Mcmaster, Michael" To: [log in to unmask] cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group) Subject: Re: [TN] Via Plug John The DuPont CB-100 will increase the amount of heat that can be conducted through the barrel. My experience with it that most people overestimate what it can do. I've done calculations that show for a 0.020" drilled hole with 0.001" copper barrel, adding CB-100 only increases the amount of heat by less than 5%. The reason is the CB-100 has a thermal conductivity of 5.23 W/mK vs 395 W/mK for copper. Even though CB-100 makes up the majority of the cross sectional area, it only adds a little to the "thermal" cross section. I always recommend that potential users of this technology run the numbers themselves and balance the potential cost increase with the improved performance. > ---------- > From: John Foster[SMTP:[log in to unmask]] > Reply To: TechNet E-Mail Forum.;John Foster > Sent: Tuesday, April 23, 2002 12:06 PM > To: [log in to unmask] > Subject: [TN] Via Plug > > Hello, I am new to this listserver. I must say that it is very > informative. I wish I had known of it long ago. > > I have a question about via plugging. Right now > our board vendor is doing our via plugs with > I guess with a standard epoxy. We are trying > to find a solution that would give us a much > better thermal performance. > > We are looking at silver epoxy and this > material from Dupont. Does anyone know of > some material that would give us a really good > thermal performance. We are in a commercial > environment. So the material does not have to > meet industrial specs. > > Any input on this matter would be greatly ' > appreciated. > > Thank You > > John Foster > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > ------- > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- [This e-mail is confidential and may also be privileged. If you are not the intended recipient, please delete it and notify us immediately; you should not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 10:00:05 +0100 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "FOX, Ian (York Rd)" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "FOX, Ian (York Rd)" <[log in to unmask]> Subject: Re: Via Plug X-To: "[log in to unmask]" <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" It's a very poor Cu alloy with a thermal conductivity that low, you're talking BeCu at that level. 395 is about right for high purity material Ian Fox TRW AS -----Original Message----- From: [log in to unmask] [mailto:[log in to unmask]] Sent: 29 April 2002 06:40 To: [log in to unmask] Subject: Re: [TN] Via Plug Michael, My thermal engineer assures me that the K value for copper is between 150 and 200 W/mK, but even so, your point about replacing CB100 (now CB101, by the way) with additional copper plating is a valid one, and offers much simpler, quicker and less costly PCB fabrication. The only caveat I would add is, make sure the ductility for your additional copper plating thickness is enough to avoid cracking the barrels under temperature cycling, especially if using FR4. Peter "Mcmaster, Michael" <[log in to unmask]> 26/04/2002 11:58 PM Sent by: TechNet <[log in to unmask]> Please respond to "TechNet E-Mail Forum."; Please respond to "Mcmaster, Michael" To: [log in to unmask] cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group) Subject: Re: [TN] Via Plug John The DuPont CB-100 will increase the amount of heat that can be conducted through the barrel. My experience with it that most people overestimate what it can do. I've done calculations that show for a 0.020" drilled hole with 0.001" copper barrel, adding CB-100 only increases the amount of heat by less than 5%. The reason is the CB-100 has a thermal conductivity of 5.23 W/mK vs 395 W/mK for copper. Even though CB-100 makes up the majority of the cross sectional area, it only adds a little to the "thermal" cross section. I always recommend that potential users of this technology run the numbers themselves and balance the potential cost increase with the improved performance. > ---------- > From: John Foster[SMTP:[log in to unmask]] > Reply To: TechNet E-Mail Forum.;John Foster > Sent: Tuesday, April 23, 2002 12:06 PM > To: [log in to unmask] > Subject: [TN] Via Plug > > Hello, I am new to this listserver. I must say that it is very > informative. I wish I had known of it long ago. > > I have a question about via plugging. Right now > our board vendor is doing our via plugs with > I guess with a standard epoxy. We are trying > to find a solution that would give us a much > better thermal performance. > > We are looking at silver epoxy and this > material from Dupont. Does anyone know of > some material that would give us a really good > thermal performance. We are in a commercial > environment. So the material does not have to > meet industrial specs. > > Any input on this matter would be greatly ' > appreciated. > > Thank You > > John Foster > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > ------- > ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- [This e-mail is confidential and may also be privileged. If you are not the intended recipient, please delete it and notify us immediately; you should not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 06:06:08 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Looking for Happy Holden X-To: fullname <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Check over at the CircuiTree magazine forum. He's on all the time. Earl ----- Original Message ----- From: "fullname" <[log in to unmask]> To: <[log in to unmask]> Sent: Monday, April 29, 2002 12:14 AM Subject: [TN] Looking for Happy Holden > I would like to have Happy Holden's contact especially email address. > Your reply would be appreciated. > > Regards - Wee Mei > > -------------------------------------------------------------------------- ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > -------------------------------------------------------------------------- ------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Sun, 1 Apr 2001 03:37:24 +1000 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, chris johnston <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: chris johnston <[log in to unmask]> Subject: Re: Looking for Happy Holden X-To: fullname <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sorry, don't know any happy holden, cannot help. -----Original Message----- From: fullname <[log in to unmask]> To: [log in to unmask] <[log in to unmask]> Date: Monday, April 29, 2002 3:09 PM Subject: [TN] Looking for Happy Holden >I would like to have Happy Holden's contact especially email address. >Your reply would be appreciated. > >Regards - Wee Mei > >--------------------------------------------------------------------------- ------ >Technet Mail List provided as a free service by IPC using LISTSERV 1.8d >To unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet >To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL >To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest >Search the archives of previous posts at: http://listserv.ipc.org/archives >Please visit IPC web site http://www.ipc.org/html/forum.htm for additional >information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 >--------------------------------------------------------------------------- ------ > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 08:00:36 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Dieselberg, Ron" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Dieselberg, Ron" <[log in to unmask]> Subject: Re: HDIC X-To: "[log in to unmask]" <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C1EF75.79147340" This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C1EF75.79147340 Content-Type: text/plain; charset="iso-8859-1" According to acronymfinder.com that is the only listing, Rick. Ron Dieselberg Trainer/Auditor CMC ELECTRONICS CINCINNATI [log in to unmask] -----Original Message----- From: Rick Fudalewski [mailto:[log in to unmask]] Sent: Saturday, April 27, 2002 13:06 PM To: [log in to unmask] Subject: [TN] HDIC Question does the term "HDIC" stand for high density integrated circuits? ------_=_NextPart_001_01C1EF75.79147340 Content-Type: text/html; charset="iso-8859-1" <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> <META content="MSHTML 5.50.4522.1800" name=GENERATOR></HEAD> <BODY> <DIV><SPAN class=530404311-29042002><FONT face=Arial color=#0000ff>According to acronymfinder.com that is the only listing, Rick.</FONT></SPAN></DIV> <DIV> </DIV> <P><FONT face=Arial size=2>Ron Dieselberg</FONT> <BR><FONT face=Arial size=2>Trainer/Auditor</FONT> <BR><FONT face=Arial size=2>CMC ELECTRONICS</FONT> <BR><FONT face=Arial size=2>CINCINNATI</FONT> <BR><FONT face=Arial size=2>[log in to unmask]</FONT> </P> <DIV> </DIV> <BLOCKQUOTE> <DIV class=OutlookMessageHeader><FONT face="Times New Roman" size=2>-----Original Message-----<BR><B>From:</B> Rick Fudalewski [mailto:[log in to unmask]]<BR><B>Sent:</B> Saturday, April 27, 2002 13:06 PM<BR><B>To:</B> [log in to unmask]<BR><B>Subject:</B> [TN] HDIC<BR><BR></FONT></DIV><FONT face=arial,helvetica><FONT size=2>Question <BR><BR>does the term "HDIC" stand for high density integrated circuits?</FONT> </FONT></BLOCKQUOTE></BODY></HTML> ------_=_NextPart_001_01C1EF75.79147340-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 08:35:58 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Sherif Refaat <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Sherif Refaat <[log in to unmask]> Subject: Re: Looking for Happy Holden X-To: fullname <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit His office telephone number is (203) 937 8622 Sherif Refaat, ----- Original Message ----- From: "fullname" <[log in to unmask]> To: <[log in to unmask]> Sent: Monday, April 29, 2002 12:14 AM Subject: [TN] Looking for Happy Holden > I would like to have Happy Holden's contact especially email address. > Your reply would be appreciated. > > Regards - Wee Mei > > -------------------------------------------------------------------------- ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > -------------------------------------------------------------------------- ------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 09:40:09 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Tempea, Ioan" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Tempea, Ioan" <[log in to unmask]> Subject: Re: Flip-flop panels MIME-Version: 1.0 Content-Type: text/plain Now I got all mixed up. I'm mainly talking about multilayer boards. Basically small piggy backs, but MLBs still! Is it doable or not? And, of course, thanks for the input, Dennis, Jac, Robert and Eddie. Ioan > -----Original Message----- > From: Eddie Rocha [SMTP:[log in to unmask]] > Sent: Wednesday, April 24, 2002 6:45 PM > To: [log in to unmask] > Subject: Re: [TN] Flip-flop panels > > Flip flopping multilayer bds can get complicated and is not > recommended. It cannot be done if the layer stack-up is not > symmetrical. > thanks, > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > ------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 09:35:54 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Sauer, Steven T." <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Sauer, Steven T." <[log in to unmask]> Subject: Re: Looking for Happy Holden X-To: fullname <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Good Morning Wee Mei, I took the following directly from a recent article in CircuiTree Magazine: Happy Holden is manager of advanced technologies for Westwood Associates (West Haven, CT). He is responsible for next-generation printed circuit manufacturing technologies, advanced design tools, and design consulting. Prior to joining Westwood, he was a consultant with TechLead Corporation, and had been at Hewlett-Packard for over 27 years. Holden formally managed Hewlett Packard's application organizations in the Far East and holds degrees in Chemical Engineering and Computer Science. If you have questions, he can be contacted via e-mail at [log in to unmask] -----Original Message----- From: fullname [mailto:[log in to unmask]] Sent: Monday, April 29, 2002 12:15 AM To: [log in to unmask] Subject: [TN] Looking for Happy Holden I would like to have Happy Holden's contact especially email address. Your reply would be appreciated. Regards - Wee Mei --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 12:21:19 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Tempea, Ioan" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Tempea, Ioan" <[log in to unmask]> Subject: Re: Flip-flop panels MIME-Version: 1.0 Content-Type: text/plain You are right Charlie, the board house must be involved. Since my original purpose was to assess the feasability, I think I had my answers. The starting point that a manufacturing man like myself needed is there. Thanks all, Ioan > -----Original Message----- > From: Charlie McMahon [SMTP:[log in to unmask]] > Sent: Monday, April 29, 2002 10:28 AM > To: Tempea, Ioan > Subject: Re: [TN] Flip-flop panels > > Joan: > > May I add to the discussion that you should not be flipping multi-layers. > Primary reason is it only adds more cost in PCB fabrication due to lower > yields caused by plating difficiencies. > If you want to enhance productivity and increase your margin, consider > co-operative engineering early on with your board supplier and assembler. > As a board and assembly supplier myself, I have offered same to my clients > and it can pay serious dividends in reducing problems increasing profit. > > I represent board shops in Canada that would be happy to assist you in > this regard. It is, in my view, the superior strategy to implement. > If you would, like I will provide contacts should you wish to investigate. > > Charlie McMahon > > > > Tempea, Ioan wrote: > > > Now I got all mixed up. > > I'm mainly talking about multilayer boards. Basically small piggy > backs, but > MLBs still! > > Is it doable or not? > > And, of course, thanks for the input, Dennis, Jac, Robert and Eddie. > > Ioan > > > -----Original Message----- > From: Eddie Rocha [ SMTP:[log in to unmask] > <mailto:SMTP:[log in to unmask]>] > Sent: Wednesday, April 24, 2002 6:45 PM > To: [log in to unmask] <mailto:[log in to unmask]> > Subject: Re: [TN] Flip-flop panels > > Flip flopping multilayer bds can get complicated and is not > recommended. It cannot be done if the layer stack-up is not > symmetrical. > thanks, > > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using > LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] > <mailto:[log in to unmask]> with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to > [log in to unmask]: <mailto:Listserv @ipc.org:> > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail > to > [log in to unmask]: <mailto:[log in to unmask]:> SET Technet > Digest > Search the archives of previous posts at: > <http://listserv.ipc.org/archives> > Please visit IPC web site > <http://www.ipc.org/html/forum.htm> for additional > information, or contact Keach Sasamori at [log in to unmask] > <mailto:[log in to unmask]> or 847-509-9700 > ext.5315 > > -------------------------------------------------------------------------- > ------- > > > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using LISTSERV > 1.8d > To unsubscribe, send a message to [log in to unmask] > <mailto:[log in to unmask]> with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to > [log in to unmask]: <mailto:[log in to unmask]:> SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: <mailto:[log in to unmask]:> SET Technet Digest > Search the archives of previous posts at: > <http://listserv.ipc.org/archives> > Please visit IPC web site > <http://www.ipc.org/html/forum.htm> for additional > information, or contact Keach Sasamori at [log in to unmask] > <mailto:[log in to unmask]> or 847-509-9700 ext.5315 > > -------------------------------------------------------------------------- > ------- > > > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 09:21:19 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Frank Kimmey <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Frank Kimmey <[log in to unmask]> Subject: Re: Flip-flop panels X-To: "Tempea, Ioan" <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Hi Ioan, It is doable. You just have to make sure of a few things first. 1. Board stack-up is symmetrical 2. Step and repeat allows even number of images (copper balancing) 3. Blind or buried vias add complexity (orders of magnitude) 4. KISS is best. The simpler the better. I have requested flip image panels to reduce costs, warpage and process times on many PCBs throughout the years. It works, but you should spend a little more time in verification and probably only use with simpler MLBs. Hope this helped, FNK Frank N Kimmey, C.I.D.+ Senior PCB Designer Powerwave Technologies PH. 916-941-3159 Fax 916-941-3195 -----Original Message----- From: Tempea, Ioan [mailto:[log in to unmask]] Sent: Monday, April 29, 2002 6:40 AM To: [log in to unmask] Subject: Re: [TN] Flip-flop panels Now I got all mixed up. I'm mainly talking about multilayer boards. Basically small piggy backs, but MLBs still! Is it doable or not? And, of course, thanks for the input, Dennis, Jac, Robert and Eddie. Ioan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 11:26:26 -0500 Reply-To: [log in to unmask] Sender: TechNet <[log in to unmask]> From: "Robert B. Denbo" <[log in to unmask]> Subject: Re: Flip-flop panels X-To: "Tempea, Ioan" <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Ioan: As long as dielectric spacing and copper weights are symmetric around the centerline of the panel it is doable. Robert B. Denbo Engineering Manager Midwest Printed Circuit Services, Inc. http://www.midwestpcb.com mailto:[log in to unmask] 847.740.4120 847.740.4187 Fax -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Tempea, Ioan Sent: Monday, April 29, 2002 8:40 AM To: [log in to unmask] Subject: Re: [TN] Flip-flop panels Now I got all mixed up. I'm mainly talking about multilayer boards. Basically small piggy backs, but MLBs still! Is it doable or not? And, of course, thanks for the input, Dennis, Jac, Robert and Eddie. Ioan > -----Original Message----- > From: Eddie Rocha [SMTP:[log in to unmask]] > Sent: Wednesday, April 24, 2002 6:45 PM > To: [log in to unmask] > Subject: Re: [TN] Flip-flop panels > > Flip flopping multilayer bds can get complicated and is not > recommended. It cannot be done if the layer stack-up is not > symmetrical. > thanks, > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > ------- ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 10:25:59 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Dwight Mattix <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Dwight Mattix <[log in to unmask]> Subject: Re: Via Plug X-To: John Foster <[log in to unmask]> In-Reply-To: <006901c1ebbd$f36abed0$550200c0@jfoster2> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed At 11:29 AM 4/24/2002 -0700, John Foster wrote: >Thanks Jim > >Did you do this extra plating selectively. Or did you just overplate the >whole PCB. We have a lot of applications where we spec thermal vias to be selectively plated to a minimum of 3 mils annular copper. The fabricator drills the thermal vias and selectively plates to 2 mils. Then they drill and (plate the rest of the board to 1 mil (adding to thermal via copper as well). It's way more effective at heat transfer than any conductive epoxy we've tried. This approach is also very effective at controlling solder wicking to the bottom of the board -- we'll use it sometimes when we don't have a thermal problem but just want to control solder flow into unplugged fields of gnd vias (saves masking backside). Dwight --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 13:28:19 -0400 Reply-To: [log in to unmask] Sender: TechNet <[log in to unmask]> From: Tom Moore <[log in to unmask]> Subject: end joint width vs. side joint length MIME-version: 1.0 Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT We are a small, primarily captive, board assembly house that recently brought our outsourced SMT assemblies in-house. We rely heavily on IPC documentation in developing our acceptance criteria for Class 2 assemblies. Have run into a problem with the idea of side joint length vs. end joint width. Section 12.2.5.4 of 610C states that the minimum side joint length is equal to the lead width or 75% of the lead length, whichever is less. I would interpret this to mean that an acceptable solder joint does not necessarily have to reach the toe of the component. However the preceding section, end joint width-12.2.5.3, seems to indicate that not only does solder need to contact the toe, it must also extend along 50% of the width of the toe. Is there a conflict or am I not interpreting the spec correctly? Thanks for your help. Tom Moore Quality Assurance Manager Electro Plasma, Inc. PH 419-255-5197 FAX 419-838-6745 --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 11:48:59 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Mcmaster, Michael" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Mcmaster, Michael" <[log in to unmask]> Subject: Re: Chemistry of discoloration? X-To: Jana Carraway <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain Oxidation, oxidation, oxidation! I don't mean to oversimplify but that is predominately what is occurring. I've seen samples where a strip of Kapton tape is placed on the board before reflow. The section under the tape doesn't darken while the rest does. > ---------- > From: Jana Carraway[SMTP:[log in to unmask]] > Reply To: TechNet E-Mail Forum.;Jana Carraway > Sent: Thursday, April 11, 2002 2:04 PM > To: [log in to unmask] > Subject: Re: [TN] Chemistry of discoloration? > > Rudy, you can even use "free radical initiation"! There must be some > formulations folks out there who can divulge a bit more about the > reactions > without giving away formulation secrets! Dr. Roos, you out there??? > > Thanks for the info Rudy, > Jana Carraway > MSEI > > -----Original Message----- > From: TechNet [mailto:[log in to unmask]]On Behalf Of Rudy Sedlak > Sent: Thursday, April 11, 2002 12:11 PM > To: [log in to unmask] > Subject: Re: [TN] Chemistry of discoloration? > > > Jana: > > You have asked a BIG question. > > There really is no known absolute answer. > > Organics tend to discolor, if they have any sort of reactivity left in > them, > and often, under the right circumstances even if they do not have any > reactivity left in them. > > The general rule is they turn dark(er). The reactions are many, and > clearly > going to be dependent on the base material. Discoloration is driven by > heat, > and often exposure to sunlight. > > Not to get too technical, but polymers (laminate, and soldermask, for > example) only rarely really react fully, and there is almost always some > unreacted polymer (called monomer when it is totally unreacted, and > oligomer > when it is partially reacted) lurking in the matrix. When this contacts > air, > water, and heat and UV, all sorts of unexpected things happen. In fact, > these very polymers often have added "preservatives" to prevent these > post-polymerization reactions from occurring. > > The bottom line is (as if this really has ANY significanse in our > industry) > that this discoloration rarely affects the physical properties of the > polymer. I think a great English playwright described this situation > centuries ago..."Much ado about nothing"? > > Rudy Sedlak > RD Chemical Company > > -------------------------------------------------------------------------- > -- > ----- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET > Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > -- > ----- > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > ------- > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 15:18:00 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Marsico, James" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Marsico, James" <[log in to unmask]> Subject: Re: Via Plug X-To: Dwight Mattix <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Dwight, just out of curiosity, why not plate ALL of the vias with 3 mils of copper. Wouldn't this be cheaper than drilling, plating, drilling and plating again? Jim Marsico Senior Engineer Production Engineering EDO Electronics Systems Group [log in to unmask] <mailto:[log in to unmask]> 631-595-5879 -----Original Message----- From: Dwight Mattix [SMTP:[log in to unmask]] Sent: Monday, April 29, 2002 1:26 PM To: [log in to unmask] Subject: Re: [TN] Via Plug At 11:29 AM 4/24/2002 -0700, John Foster wrote: >Thanks Jim > >Did you do this extra plating selectively. Or did you just overplate the >whole PCB. We have a lot of applications where we spec thermal vias to be selectively plated to a minimum of 3 mils annular copper. The fabricator drills the thermal vias and selectively plates to 2 mils. Then they drill and (plate the rest of the board to 1 mil (adding to thermal via copper as well). It's way more effective at heat transfer than any conductive epoxy we've tried. This approach is also very effective at controlling solder wicking to the bottom of the board -- we'll use it sometimes when we don't have a thermal problem but just want to control solder flow into unplugged fields of gnd vias (saves masking backside). Dwight ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 15:41:13 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Jim Keating <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Jim Keating <[log in to unmask]> Subject: Re: Removal of Cured Nomenclature Ink X-To: "Furrow, Robert Gordon (Bob)" <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Bob, Sorry for the late response to this posting. If you haven't already reworked the boards might I suggest laser removal. This will work for certain applications and we have had success multiple times. If interested please cantact me via TechNet or at (603) 882-9944. Regards Jim Keating "Furrow, Robert Gordon (Bob)" wrote: > Hi TechNet, > > I have been asked what chemical(s) would be required to remove cured > nomenclature ink (also known as silkscreen) from a bare board without > damaging the board itself. I am assuming it is an epoxy ink, but I do not > know the exact formulation. Any input is appreciated. I should know the > exact formulation of the applied nomenclature ink tomorrow, but thought that > maybe there is a generic answer. > > Thanks, > Robert Furrow > Printed Wiring Board Engineer > Supply Chain Networks > Lucent Technologies > 978-960-3224 [log in to unmask] > > --------------------------------------------------------------------------------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 15:54:23 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Jack Crawford <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Jack Crawford <[log in to unmask]> Subject: Proposed lifting of component date code restrictions X-To: [log in to unmask] Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="=_2D70D107.40214376" This is a MIME message. If you are reading this text, you may want to consider changing to a mail reader or gateway that understands how to properly handle MIME multipart messages. --=_2D70D107.40214376 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable IPC has become aware that the National Electronics Distributors Association= (NEDA) has posted a white paper discussing the proposed lifting of date = code restrictions and they have requested comments from end users as well = as component suppliers and distributors. The paper can be viewed at = http://www.nedassoc.org/whitedat.html. Comments can be provided to me on or off net; we'll compile them and = forward to NEDA. If you comment to NEDA directly [log in to unmask], please = cc: me on your reply [log in to unmask] Cordially Jack =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D APEX 2003 - the industry's premier trade show in Electronics Manufacturing, March 31-April 2, 2003, Anaheim, California. More information on website www.goapex.org -------- Jack Crawford, IPC Director of Assembly Standards and Technology 2215 Sanders Road, Northbrook IL 60062-6135 [log in to unmask] 847-790-5393 fax 847-504-2393 --=_2D70D107.40214376 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Description: HTML <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Diso-8859-1"= > <META content=3D"MSHTML 5.50.4134.600" name=3DGENERATOR></HEAD> <BODY style=3D"MARGIN-TOP: 2px; FONT: 8pt MS Sans Serif; MARGIN-LEFT: = 2px"> <DIV><FONT size=3D1>IPC has become aware that t</FONT><FONT size=3D1>he = National=20 Electronics Distributors Association (NEDA) has posted a white paper = discussing=20 the proposed lifting of date code restrictions and they have requested = comments=20 from end users as well as component suppliers and distributors. The paper = can be=20 viewed at <A=20 href=3D"http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/whit= edat.html</A>.</FONT></DIV> <DIV> </DIV> <DIV><FONT size=3D1>Comments can be provided to me on or off net; we'll = compile=20 them and forward to NEDA. If you comment to NEDA directly <A=20 href=3D"mailto:[log in to unmask],">[log in to unmask],</A> please cc: = me on=20 your reply <A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A>.<BR></FONT></= DIV> <DIV><FONT size=3D1>Cordially</FONT></DIV> <DIV><FONT size=3D1>Jack</FONT></DIV> <DIV> </DIV> <DIV><FONT size=3D1>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR= >APEX 2003 - the=20 industry's premier trade show in Electronics<BR>Manufacturing, March = 31-April 2,=20 2003, Anaheim, California.<BR>More information on website <A=20 href=3D"http://www.goapex.org">www.goapex.org</A><BR>--------<BR>Jack = Crawford,=20 IPC Director of Assembly Standards and Technology<BR>2215 Sanders Road,=20 Northbrook IL 60062-6135<BR><A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> <BR>847-790-5393<BR>fax= =20 847-504-2393</DIV></FONT></BODY></HTML> --=_2D70D107.40214376-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 16:49:17 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Via Plug Don't mean to but in, but what the hell. Just think how much surface copper would be plated and how much resist would have to be applied and how much plating overhang would be involved even with several resist layers applied, etc.. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 19:05:47 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: Proposed lifting of component date code restrictions MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_197.63022bd.29ff2bcb_boundary" --part1_197.63022bd.29ff2bcb_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I guess my first question is; If the datecodes currently mean different things depending on the manufacturer, why not standardize what datecodes really mean rather than get rid of them? The paper talks about all the advances that have been made understanding root causes concerning solderability issues, improved storage and handling methods, etc., then why do I continue to get moisture sensitive components from distributors in un-sealed packaging? But that's another issue... A recent issue here at my facility underscores the importance of a datecode on the part. We build an assembly for a customer that uses three 240-pin QFP DSP's from a well known manufacturer. So far, we've built-up over 200 assemblies for our customer. We shipped the assemblies to our customer and they integrated them into the higher level assembly, and discovered they don't work...not communicating at all with the rest of the system. Numerous phone calls to the manufacturer trying to find out what the problem could be resulted in "Nothing has changed with the part, the die hasn't changed, nothing..." Funny thing was our first pre-production shipment of the assemblies worked fine!! After looking a little closer, the first lot of assemblies contained DSP's that had a datecode that was 2000 or earlier, everything that's failing are later...but still, according to the device manufacturer; "Nothing has changed..." If there wasn't a datecode on the part, we wouldn't know what we could put on the assemblies and work. There is a lot of effort being expended to try and isolate what the problem really is (with no help from the device supplier), but for now we need to find parts that work so that it doesn't shut down production, the only solid way (for now) is to find parts within a certain date code. Now I'm faced with the possible task of reworking 200 assemblies, each with three 240-pin QFP's, with a early datecode part...fun stuff I know. -Steve Gregory- > IPC has become aware that the National Electronics Distributors Association > (NEDA) has posted a white paper discussing the proposed lifting of date > code restrictions and they have requested comments from end users as well > as component suppliers and distributors. The paper can be viewed at <A HREF="http://www.nedassoc.org/whitedat.html"> > http://www.nedassoc.org/whitedat.html</A>. > > Comments can be provided to me on or off net; we'll compile them and > forward to NEDA. If you comment to NEDA directly <A HREF="mailto:[log in to unmask],">[log in to unmask],</A> please > cc: me on your reply <A HREF="mailto:[log in to unmask]">[log in to unmask]</A>. > > Cordially > Jack > --part1_197.63022bd.29ff2bcb_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit <HTML><FONT FACE=arial,helvetica><FONT SIZE=2>I guess my first question is; If the datecodes currently mean different things depending on the manufacturer, why not standardize what datecodes really mean rather than get rid of them?<BR> <BR> The paper talks about all the advances that have been made understanding root causes concerning solderability issues, improved storage and handling methods, etc., then why do I continue to get moisture sensitive components from distributors in un-sealed packaging? But that's another issue...<BR> <BR> A recent issue here at my facility underscores the importance of a datecode on the part. We build an assembly for a customer that uses three 240-pin QFP DSP's from a well known manufacturer. So far, we've built-up over 200 assemblies for our customer. We shipped the assemblies to our customer and they integrated them into the higher level assembly, and discovered they don't work...not communicating at all with the rest of the system.<BR> <BR> Numerous phone calls to the manufacturer trying to find out what the problem could be resulted in "Nothing has changed with the part, the die hasn't changed, nothing..."<BR> Funny thing was our first pre-production shipment of the assemblies worked fine!! <BR> <BR> After looking a little closer, the first lot of assemblies contained DSP's that had a datecode that was 2000 or earlier, everything that's failing are later...but still, according to the device manufacturer; "Nothing has changed..."<BR> <BR> If there wasn't a datecode on the part, we wouldn't know what we could put on the assemblies and work. There is a lot of effort being expended to try and isolate what the problem really is (with no help from the device supplier), but for now we need to find parts that work so that it doesn't shut down production, the only solid way (for now) is to find parts within a certain date code.<BR> <BR> Now I'm faced with the possible task of reworking 200 assemblies, each with three 240-pin QFP's, with a early datecode part...fun stuff I know.<BR> <BR> -Steve Gregory-<BR> <BR> <BR> </FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=1 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at <A HREF="http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/whitedat.html</A>.</FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BR> <BR> </FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=1 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly <A HREF="mailto:[log in to unmask],">[log in to unmask],</A> please cc: me on your reply <A HREF="mailto:[log in to unmask]">[log in to unmask]</A>.<BR> </FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BR> </FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=1 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Cordially</FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BR> </FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=1 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Jack</FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BR> </BLOCKQUOTE><BR> </FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BR> </FONT></HTML> --part1_197.63022bd.29ff2bcb_boundary-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 07:58:35 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, fullname <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: fullname <[log in to unmask]> Organization: DSO National Laboratories Subject: Re: Looking for Happy Holden X-To: "Sauer, Steven T." <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Thank you so much for your help. Regards - Wee Mei "Sauer, Steven T." wrote: > Good Morning Wee Mei, > I took the following directly from a recent article in CircuiTree Magazine: > Happy Holden is manager of advanced technologies for Westwood Associates > (West Haven, CT). He is responsible for next-generation printed circuit > manufacturing technologies, advanced design tools, and design consulting. > Prior to joining Westwood, he was a consultant with TechLead Corporation, > and had been at Hewlett-Packard for over 27 years. Holden formally managed > Hewlett Packard's application organizations in the Far East and holds > degrees in Chemical Engineering and Computer Science. If you have questions, > he can be contacted via e-mail at [log in to unmask] > > -----Original Message----- > From: fullname [mailto:[log in to unmask]] > Sent: Monday, April 29, 2002 12:15 AM > To: [log in to unmask] > Subject: [TN] Looking for Happy Holden > > I would like to have Happy Holden's contact especially email address. > Your reply would be appreciated. > > Regards - Wee Mei > > --------------------------------------------------------------------------------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 08:00:32 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, fullname <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: fullname <[log in to unmask]> Organization: DSO National Laboratories Subject: Re: Looking for Happy Holden X-To: [log in to unmask] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Thanks for the information, Moonman. Regards - Wee Mei Earl Moon wrote: > Check over at the CircuiTree magazine forum. He's on all the time. > > Earl > > ----- Original Message ----- > From: "fullname" <[log in to unmask]> > To: <[log in to unmask]> > Sent: Monday, April 29, 2002 12:14 AM > Subject: [TN] Looking for Happy Holden > > > I would like to have Happy Holden's contact especially email address. > > Your reply would be appreciated. > > > > Regards - Wee Mei > > > > -------------------------------------------------------------------------- > ------- > > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > > To unsubscribe, send a message to [log in to unmask] with following text in > > the BODY (NOT the subject field): SIGNOFF Technet > > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > > Search the archives of previous posts at: http://listserv.ipc.org/archives > > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > > -------------------------------------------------------------------------- > ------- > > --------------------------------------------------------------------------------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 17:32:34 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, David Douthit <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: David Douthit <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: Jack Crawford <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="------------9A6CBF01DB9B3CDD4EC37229" --------------9A6CBF01DB9B3CDD4EC37229 Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353" Content-Transfer-Encoding: 7bit Jack, I agree with Steve's comments. The divergence between the commercial and high reliability electronics is a very serious issue. Any proposal that effects configuration control must be carefully weighed. Trying to save money no matter what the cost is a very easy trap to step into. Standardizing the date code process is needed. Use of date codes is needed for "life time" buys of COTS when obsolescence problems are present. Configuration control issues can also cause problems with commercial OEMs. Unless tracking methods are in place part failures by lot would be difficult to isolate in higher assemblies. This could create a much larger recall condition. Just some comments. David A. Douthit Manager LoCan LLC Jack Crawford wrote: > IPC has become aware that the National Electronics Distributors > Association (NEDA) has posted a white paper discussing the proposed > lifting of date code restrictions and they have requested comments > from end users as well as component suppliers and distributors. The > paper can be viewed at http://www.nedassoc.org/whitedat.html. Comments > can be provided to me on or off net; we'll compile them and forward to > NEDA. If you comment to NEDA directly [log in to unmask], please cc: me > on your reply > [log in to unmask] ========================================== > > APEX 2003 - the industry's premier trade show in Electronics > Manufacturing, March 31-April 2, 2003, Anaheim, California. > More information on website www.goapex.org > -------- > Jack Crawford, IPC Director of Assembly Standards and Technology > 2215 Sanders Road, Northbrook IL 60062-6135 > [log in to unmask] > 847-790-5393 > fax 847-504-2393 --------------9A6CBF01DB9B3CDD4EC37229 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <body style="MARGIN-TOP: 2px; FONT: 8pt MS Sans Serif; MARGIN-LEFT: 2px"> Jack, <p>I agree with Steve's comments. The divergence between the commercial and high reliability electronics is a very serious issue. <br>Any proposal that effects configuration control must be carefully weighed. Trying to save money no matter what the cost is a <br>very easy trap to step into. <p>Standardizing the date code process is needed. <br>Use of date codes is needed for "life time" buys of COTS when obsolescence problems are present. <p>Configuration control issues can also cause problems with commercial OEMs. <br>Unless tracking methods are in place part failures by lot would be difficult to isolate in higher assemblies. <br>This could create a much larger recall condition. <p>Just some comments. <p>David A. Douthit <br>Manager <br>LoCan LLC <p>Jack Crawford wrote: <blockquote TYPE=CITE> <font size=-2>IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at <a href="http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/whitedat.html</a>.</font> <font size=-2>Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly <a href="mailto:[log in to unmask],">[log in to unmask],</a> please cc: me on your reply <a href="mailto:[log in to unmask]">[log in to unmask]</a>.</font><font size=-2>Cordially</font><font size=-2>Jack</font> <font size=-2>==========================================</font> <br><font size=-2>APEX 2003 - the industry's premier trade show in Electronics</font> <br><font size=-2>Manufacturing, March 31-April 2, 2003, Anaheim, California.</font> <br><font size=-2>More information on website <a href="http://www.goapex.org">www.goapex.org</a></font> <br><font size=-2>--------</font> <br><font size=-2>Jack Crawford, IPC Director of Assembly Standards and Technology</font> <br><font size=-2>2215 Sanders Road, Northbrook IL 60062-6135</font> <br><font size=-2><a href="mailto:[log in to unmask]">[log in to unmask]</a></font> <br><font size=-2>847-790-5393</font> <br><font size=-2>fax 847-504-2393</font></blockquote> </body> </html> --------------9A6CBF01DB9B3CDD4EC37229-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 08:40:29 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: Via Plug X-To: Earl Moon <[log in to unmask]> MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii I just did a calculation for some of our boards that use this via plug material for enhancing thermal transfer between chips and thermal planes. The calculation was to see by how much I would have to increase hole plating thickness by in order to completely replace the epoxy in terms of thermal conductivity. I'm talking about a 24 mils diameter hole, plated initially to 1/2 oz copper minimum and filled with epoxy. The board is 63 mils thick. Can you guess what the increase is? ..... It's actually only 0.2 oz or 0.28 mils, according to our thermal engineer. So why go to all the trouble and expense of filling holes if the only purpose is thermal - a fairly small increase in plating thickness is all that's needed. Peter Earl Moon <[log in to unmask]> 30/04/2002 05:49 AM Sent by: TechNet <[log in to unmask]> Please respond to "TechNet E-Mail Forum."; Please respond to Earl Moon To: [log in to unmask] cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group) Subject: Re: [TN] Via Plug Don't mean to but in, but what the hell. Just think how much surface copper would be plated and how much resist would have to be applied and how much plating overhang would be involved even with several resist layers applied, etc.. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- [This e-mail is confidential and may also be privileged. If you are not the intended recipient, please delete it and notify us immediately; you should not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Mon, 29 Apr 2002 19:53:45 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Praveen Kumar <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Praveen Kumar <[log in to unmask]> Subject: Mechanical Strength of Solder Joints Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Hi All, I am looking for a technical paper that details the mechanical strength of solder joints, BGAs in particular . In addition, are there any specifications in this regard? I would really appreciate it if i could obtain a soft copy of the same. Thanks and have a nice day. Praveen -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 13:57:37 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, fullname <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: fullname <[log in to unmask]> Organization: DSO National Laboratories Subject: Re: Proposed lifting of component date code restrictions X-To: [log in to unmask] MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="------------2D0D0406916B255643800C8C" --------------2D0D0406916B255643800C8C Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I agree with Steve strongly. Without any date code, it is mission impossible to trace which batch of the components failed. Regards - Wee Mei [log in to unmask] wrote: > I guess my first question is; If the datecodes currently mean > different things depending on the manufacturer, why not standardize > what datecodes really mean rather than get rid of them? > > The paper talks about all the advances that have been made > understanding root causes concerning solderability issues, improved > storage and handling methods, etc., then why do I continue to get > moisture sensitive components from distributors in un-sealed > packaging? But that's another issue... > > A recent issue here at my facility underscores the importance of a > datecode on the part. We build an assembly for a customer that uses > three 240-pin QFP DSP's from a well known manufacturer. So far, we've > built-up over 200 assemblies for our customer. We shipped the > assemblies to our customer and they integrated them into the higher > level assembly, and discovered they don't work...not communicating at > all with the rest of the system. > > Numerous phone calls to the manufacturer trying to find out what the > problem could be resulted in "Nothing has changed with the part, the > die hasn't changed, nothing..." > Funny thing was our first pre-production shipment of the assemblies > worked fine!! > > After looking a little closer, the first lot of assemblies contained > DSP's that had a datecode that was 2000 or earlier, everything that's > failing are later...but still, according to the device manufacturer; > "Nothing has changed..." > > If there wasn't a datecode on the part, we wouldn't know what we could > put on the assemblies and work. There is a lot of effort being > expended to try and isolate what the problem really is (with no help > from the device supplier), but for now we need to find parts that work > so that it doesn't shut down production, the only solid way (for now) > is to find parts within a certain date code. > > Now I'm faced with the possible task of reworking 200 assemblies, each > with three 240-pin QFP's, with a early datecode part...fun stuff I > know. > > -Steve Gregory- > > > >> IPC has become aware that the National Electronics Distributors >> Association (NEDA) has posted a white paper discussing the proposed >> lifting of date code restrictions and they have requested comments >> from end users as well as component suppliers and distributors. The >> paper can be viewed at http://www.nedassoc.org/whitedat.html. >> >> Comments can be provided to me on or off net; we'll compile them and >> forward to NEDA. If you comment to NEDA directly [log in to unmask], >> please cc: me on your reply [log in to unmask] >> >> Cordially >> Jack > > > --------------2D0D0406916B255643800C8C Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <font face="Arial,Helvetica"><font size=-1>I agree with Steve strongly.</font></font><font face="Arial,Helvetica"><font size=-1></font></font> <p><font face="Arial,Helvetica"><font size=-1>Without any date code, it is mission impossible to trace which batch of the components failed.</font></font><font face="Arial,Helvetica"><font size=-1></font></font> <p><font face="Arial,Helvetica"><font size=-1>Regards - Wee Mei</font></font> <p>[log in to unmask] wrote: <blockquote TYPE=CITE><font face="arial,helvetica"><font size=-1>I guess my first question is; If the datecodes currently mean different things depending on the manufacturer, why not standardize what datecodes really mean rather than get rid of them?</font></font> <p><font face="arial,helvetica"><font size=-1>The paper talks about all the advances that have been made understanding root causes concerning solderability issues, improved storage and handling methods, etc., then why do I continue to get moisture sensitive components from distributors in un-sealed packaging? But that's another issue...</font></font> <p><font face="arial,helvetica"><font size=-1>A recent issue here at my facility underscores the importance of a datecode on the part. We build an assembly for a customer that uses three 240-pin QFP DSP's from a well known manufacturer. So far, we've built-up over 200 assemblies for our customer. We shipped the assemblies to our customer and they integrated them into the higher level assembly, and discovered they don't work...not communicating at all with the rest of the system.</font></font> <p><font face="arial,helvetica"><font size=-1>Numerous phone calls to the manufacturer trying to find out what the problem could be resulted in "Nothing has changed with the part, the die hasn't changed, nothing..."</font></font> <br><font face="arial,helvetica"><font size=-1>Funny thing was our first pre-production shipment of the assemblies worked fine!!</font></font> <p><font face="arial,helvetica"><font size=-1>After looking a little closer, the first lot of assemblies contained DSP's that had a datecode that was 2000 or earlier, everything that's failing are later...but still, according to the device manufacturer; "Nothing has changed..."</font></font> <p><font face="arial,helvetica"><font size=-1>If there wasn't a datecode on the part, we wouldn't know what we could put on the assemblies and work. There is a lot of effort being expended to try and isolate what the problem really is (with no help from the device supplier), but for now we need to find parts that work so that it doesn't shut down production, the only solid way (for now) is to find parts within a certain date code.</font></font> <p><font face="arial,helvetica"><font size=-1>Now I'm faced with the possible task of reworking 200 assemblies, each with three 240-pin QFP's, with a early datecode part...fun stuff I know.</font></font> <p><font face="arial,helvetica"><font size=-1>-Steve Gregory-</font></font> <br> <br> <blockquote TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"><font face="Arial"><font color="#000000"><font size=-2>IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at <a href="http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/whitedat.html</a>.</font></font></font> <p><font face="Arial"><font color="#000000"><font size=-2>Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly <a href="mailto:[log in to unmask],">[log in to unmask],</a> please cc: me on your reply <a href="mailto:[log in to unmask]">[log in to unmask]</a>.</font></font></font> <p><font face="Arial"><font color="#000000"><font size=-2>Cordially</font></font></font> <br><font face="Arial"><font color="#000000"><font size=-2>Jack</font></font></font></blockquote> <br> </blockquote> </html> --------------2D0D0406916B255643800C8C-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 11:02:03 +0300 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Brian Ellis <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Brian Ellis <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: Jack Crawford <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Jack Although I'm not directly concerned, I read this paper and come to the direct conclusion that the semiconductor industry are trying to weasel out of their responsibilities. "Twenty years ago, solderability problems were much more common than today and certain metallurgical problems worsened over time, to the extent that quality or reliability could have been compromised." These guys are saying that the solderability of semiconductor packages - of ALL types - will remain perfect: "The three year rule was adopted for commercial procurement but is now irrelevant because of the technological advances that the industry has made in the intervening years.". I strongly dispute this assertion. It may be true that the solderability of components has generally improved for fresh components but it is not true that it will remain so for more than three years. Do you know of any bare board fab shop that will guarantee the solderability of all their products indefinitely? The way I see this is that more emphasis will need to be placed on goods-in testing of semiconductors for solderability and, perhaps, other criteria, by the OEM, increasing his overheads, while the semiconductor manufacturers rub their hands all the way to the bank, having weaseled themselves out of their normal quality responsibilities. On the other hand, I can see the difficulties that may be enegndered by purchasers specifying dates. The easiest way of overcoming the problem, IMHO, is for the semiconductor blokes to implement a substantial surcharge on date-specific orders. This would have the double advantage of encouraging assemblers not to specify dates except where they consider it essential, for any reason, and it would cover the cost of the extra hassle at the other end. Notwithstanding, I believe that if the suppliers ship old packages, they should be prepared to cover the extra cost to the assemblers if they do not meet full expectations of quality, including solderability, cleanability, moisture absorption, etc. This may also encourage them to ensure that very old inventory is systematically replaced, because the cost of such guarantees would probably exceed the value of most products. Just some thoughts... Best regards, Brian --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 17:19:15 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, zhang shoukai <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: zhang shoukai <[log in to unmask]> Organization: huawei technologies Subject: The effect to printing from pas vs soldermask height MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0011_01C1F06B.27717B40" This is a multi-part message in MIME format. ------=_NextPart_000_0011_01C1F06B.27717B40 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SGkgYWxsLA0KDQpBcyB3ZSBrbm93IHRoYXQgdGhlIHRoaWNrbmVzcyBvZiBPU1Agb24gUENCIFBh ZHMgaXMgMC4yLTAuNXVtLCBhbmQgdGhlIHNvbGRlcm1hc2sgb2YgUENCIGlzIGF0IGxlYXN0IDEw dW0sIHN1cHBvc2Ugd2UgYXBwbHkgTlNNRCBwYWRzLCBhbmQgaGF0Y2ggc29tZSBuby1mdW5jdGlv bmFsIGNvcHBlcnMocmVtZW1iZXIgdGhlIGhlaWdodCBpcyB0aGUgc2FtZSBhcyB0aGUgY29wcGVy IG9mIHBhZHMpIGFyb3VuZCBmaW5lLXBpdGNoIHBhZHMsIGhvdyB0byBjb25zaWRlciB0aGUgZWZm ZWN0IGZvciBzb2xkZXIgcGFzdGUgcHJpbnRpbmcgZnJvbSB0aGUgc29sZGVybWFzayBoaWdoZXIg dGhhbiB0aGUgcGFkcyB3aGVuIHVzaW5nIHN0ZWVsbmVzcyBzcXVlZWdlPyBFTklHIHN1cmZhY2Ug UENCIGVuY291bnRlcnMgc2ltaWxpYXIgcXVlc3Rpb24uIA0KDQpJbnB1dHRpbmcgeW91ciBjb21t ZW50cyB3aWxsIGJlIGhlaWdobHkgYXBwcmVjaWF0ZWQhDQoNCkJlc3QgcmVnYXJkcywNClpoYW5n c2hvdWthaSAgDQoNCiANCg== ------=_NextPart_000_0011_01C1F06B.27717B40 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: base64 PCFET0NUWVBFIEhUTUwgUFVCTElDICItLy9XM0MvL0RURCBIVE1MIDQuMCBUcmFuc2l0aW9uYWwv L0VOIj4NCjxIVE1MPjxIRUFEPg0KPE1FVEEgaHR0cC1lcXVpdj1Db250ZW50LVR5cGUgY29udGVu dD0idGV4dC9odG1sOyBjaGFyc2V0PWdiMjMxMiI+DQo8TUVUQSBjb250ZW50PSJNU0hUTUwgNS41 MC40NTIyLjE4MDAiIG5hbWU9R0VORVJBVE9SPg0KPFNUWUxFPjwvU1RZTEU+DQo8L0hFQUQ+DQo8 Qk9EWSBiZ0NvbG9yPSNmZmZmZmY+DQo8RElWPjxGT05UIHNpemU9Mj5IaSBhbGwsPC9GT05UPjwv RElWPg0KPERJVj48Rk9OVCBzaXplPTI+PC9GT05UPiZuYnNwOzwvRElWPg0KPERJVj48Rk9OVCBz aXplPTI+QXMgd2Uga25vdyB0aGF0IHRoZSB0aGlja25lc3Mgb2YgT1NQIG9uIFBDQiZuYnNwO1Bh ZHMgaXMgDQowLjItMC41dW0sIGFuZCB0aGUgc29sZGVybWFzayBvZiBQQ0IgaXMgYXQgbGVhc3Qg MTB1bSwgc3VwcG9zZSB3ZSBhcHBseSBOU01EIA0KcGFkcywgYW5kIGhhdGNoIHNvbWUgbm8tZnVu Y3Rpb25hbCBjb3BwZXJzKHJlbWVtYmVyJm5ic3A7dGhlIGhlaWdodCBpcyANCnRoZSZuYnNwO3Nh bWUgYXMgdGhlIGNvcHBlciZuYnNwO29mIHBhZHMpJm5ic3A7YXJvdW5kIGZpbmUtcGl0Y2ggcGFk cywgaG93IHRvIA0KY29uc2lkZXIgdGhlIGVmZmVjdCZuYnNwO2ZvciBzb2xkZXIgcGFzdGUgcHJp bnRpbmcgZnJvbSB0aGUgc29sZGVybWFzayBoaWdoZXIgDQp0aGFuIHRoZSBwYWRzIHdoZW4gdXNp bmcgc3RlZWxuZXNzIHNxdWVlZ2U/IEVOSUcgc3VyZmFjZSANClBDQiZuYnNwO2VuY291bnRlcnMm bmJzcDtzaW1pbGlhciBxdWVzdGlvbi4gPC9GT05UPjwvRElWPg0KPERJVj4mbmJzcDs8L0RJVj4N CjxESVY+PEZPTlQgc2l6ZT0yPklucHV0dGluZyB5b3VyIGNvbW1lbnRzIHdpbGwgYmUgaGVpZ2hs eSANCmFwcHJlY2lhdGVkITwvRk9OVD48L0RJVj4NCjxESVY+Jm5ic3A7PC9ESVY+DQo8RElWPjxG T05UIHNpemU9Mj5CZXN0IHJlZ2FyZHMsPC9GT05UPjwvRElWPg0KPERJVj48Rk9OVCBzaXplPTI+ WmhhbmdzaG91a2FpPC9GT05UPiZuYnNwOyZuYnNwOzwvRElWPg0KPERJVj48Rk9OVCBzaXplPTI+ PC9GT05UPiZuYnNwOzwvRElWPg0KPERJVj4mbmJzcDs8L0RJVj48L0JPRFk+PC9IVE1MPg0K ------=_NextPart_000_0011_01C1F06B.27717B40-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 17:26:35 +0800 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Re: Proposed lifting of component date code restrictions X-To: David Douthit <[log in to unmask]> MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Steve and David, The paper doe not propose doign away with date codes. As stated in the paper, manufacturers will continue to put date codes on parts. What they ARE trying to do away with is customers demanding components younger than a certain date code in order to avoid solderability issues due to ageing. The paper is trying to make the point that in today's mature industry, solderability issues have been addressed with advances in manufacturing technology, handling and storage procedures, so the need to specify date codes as well when ordering parts is not necessary (or should not be necessary, especially for commercial manufacture). Basically, it seems, distributors are fed up with having to sort through their stock to select parts with specifically required date codes, when, they say, all the other date codes are just as good. The paper is an attempt to highlight the unnecessary sugar this puts in the petrol that drives a slick supply system. Having strictly marked the comprehension test like a good teacher, I'll add my 2 cents worth. I'm in the Aerospace sector, so the paper does not strictly relate to my area of business. However, I have had enough experience, as Steve has, of components from particular date code batches going sour. If this is a general problem, then the distributors and manufacturers should be aware and remove faulty batches from the supply chain stock, but one can never tell. So there are circumstances where being able to specify particular date codes that are, or are not, suitable is a necessary option to a purchasing department. Further, although most of the industry is mature, some of it is not. There are still firms that do not have, or cannot/will not afford the expense of putting in expensive handling and storage facilities and procedures. These companies, it may be argued, should be the first to be put against the wall when the revolution comes, but nevertheless they're out here. This is not directly relevant to the paper, as the authors will take the stand that improper handling and storage that gives rise to solderability issues is not the problem of the OEM's/distributors. It will be up to the companies to ensure their handling and storage complies with recommendations given. The paper does include a number of assumptions about the industry that may be overlooking genuine problems that could appear if the paper's proposal is introduced. I'm taking the paper's contents more as a plea for realism, rather than a hard plan to ban the stating of date codes as a requirement. It does, after all, mention get-out clauses, such as contractual requirements that are placed on a purchaser to only buy parts of specific date codes, so I don't see it as anything to get too excited about. So many words for 2 cents - shows what they're probably worth, eh? Peter David Douthit <[log in to unmask]> 30/04/2002 08:32 AM Sent by: TechNet <[log in to unmask]> Please respond to "TechNet E-Mail Forum."; Please respond to David Douthit To: [log in to unmask] cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group) Subject: Re: [TN] Proposed lifting of component date code restrictions Jack, I agree with Steve's comments. The divergence between the commercial and high reliability electronics is a very serious issue. Any proposal that effects configuration control must be carefully weighed. Trying to save money no matter what the cost is a very easy trap to step into. Standardizing the date code process is needed. Use of date codes is needed for "life time" buys of COTS when obsolescence problems are present. Configuration control issues can also cause problems with commercial OEMs. Unless tracking methods are in place part failures by lot would be difficult to isolate in higher assemblies. This could create a much larger recall condition. Just some comments. David A. Douthit Manager LoCan LLC Jack Crawford wrote: IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at http://www.nedassoc.org/whitedat.html. Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly [log in to unmask], please cc: me on your reply [log in to unmask] ========================================== APEX 2003 - the industry's premier trade show in Electronics Manufacturing, March 31-April 2, 2003, Anaheim, California. More information on website www.goapex.org -------- Jack Crawford, IPC Director of Assembly Standards and Technology 2215 Sanders Road, Northbrook IL 60062-6135 [log in to unmask] 847-790-5393 fax 847-504-2393 [This e-mail is confidential and may also be privileged. If you are not the intended recipient, please delete it and notify us immediately; you should not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 06:44:01 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: fullname <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0046_01C1F012.69EC0E80" This is a multi-part message in MIME format. ------=_NextPart_000_0046_01C1F012.69EC0E80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Traceability went out the window with cots. Used to maintain = traceability to the second metallization layer. If a pilot crashed, = his/her remains seldom recoverable but components were at times. Earl By the way, if you're out on the great American highways and byways, = you'll notice almost as many trucks/truckers/f------, etc. Hell, they = get paid 50 cents a mile and make nearly 50K a year. Whoopie shit, where = do I sign up - truckmasters I think it is. ----- Original Message -----=20 From: fullname=20 To: [log in to unmask] Sent: Tuesday, April 30, 2002 1:57 AM Subject: Re: [TN] Proposed lifting of component date code restrictions I agree with Steve strongly.=20 Without any date code, it is mission impossible to trace which batch = of the components failed.=20 Regards - Wee Mei=20 [log in to unmask] wrote:=20 I guess my first question is; If the datecodes currently mean = different things depending on the manufacturer, why not standardize what = datecodes really mean rather than get rid of them?=20 The paper talks about all the advances that have been made = understanding root causes concerning solderability issues, improved = storage and handling methods, etc., then why do I continue to get = moisture sensitive components from distributors in un-sealed packaging? = But that's another issue...=20 A recent issue here at my facility underscores the importance of a = datecode on the part. We build an assembly for a customer that uses = three 240-pin QFP DSP's from a well known manufacturer. So far, we've = built-up over 200 assemblies for our customer. We shipped the assemblies = to our customer and they integrated them into the higher level assembly, = and discovered they don't work...not communicating at all with the rest = of the system.=20 Numerous phone calls to the manufacturer trying to find out what the = problem could be resulted in "Nothing has changed with the part, the die = hasn't changed, nothing..."=20 Funny thing was our first pre-production shipment of the assemblies = worked fine!!=20 After looking a little closer, the first lot of assemblies contained = DSP's that had a datecode that was 2000 or earlier, everything that's = failing are later...but still, according to the device manufacturer; = "Nothing has changed..."=20 If there wasn't a datecode on the part, we wouldn't know what we = could put on the assemblies and work. There is a lot of effort being = expended to try and isolate what the problem really is (with no help = from the device supplier), but for now we need to find parts that work = so that it doesn't shut down production, the only solid way (for now) is = to find parts within a certain date code.=20 Now I'm faced with the possible task of reworking 200 assemblies, = each with three 240-pin QFP's, with a early datecode part...fun stuff I = know.=20 -Steve Gregory-=20 =20 =20 IPC has become aware that the National Electronics Distributors = Association (NEDA) has posted a white paper discussing the proposed = lifting of date code restrictions and they have requested comments from = end users as well as component suppliers and distributors. The paper can = be viewed at http://www.nedassoc.org/whitedat.html.=20 Comments can be provided to me on or off net; we'll compile them = and forward to NEDA. If you comment to NEDA directly [log in to unmask], = please cc: me on your reply [log in to unmask] Cordially=20 Jack =20 ------=_NextPart_000_0046_01C1F012.69EC0E80 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2715.400" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Traceability went out the window with = cots. Used to=20 maintain traceability to the second metallization layer. If a pilot = crashed,=20 his/her remains seldom recoverable but components were at = times.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Earl</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>By the way, if you're out on the great = American=20 highways and byways, you'll notice almost as many = trucks/truckers/f------, etc.=20 Hell, they get paid 50 cents a mile and make nearly 50K a year. Whoopie = shit,=20 where do I sign up - truckmasters I think it is.</FONT></DIV> <BLOCKQUOTE dir=3Dltr=20 style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV> <DIV=20 style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B>=20 <A [log in to unmask] = href=3D"mailto:[log in to unmask]">fullname</A>=20 </DIV> <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A [log in to unmask] href=3D"mailto:[log in to unmask]">[log in to unmask]</A> </DIV> <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, April 30, 2002 = 1:57=20 AM</DIV> <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: [TN] Proposed = lifting of=20 component date code restrictions</DIV> <DIV><BR></DIV><FONT face=3DArial,Helvetica><FONT size=3D-1>I agree = with Steve=20 strongly.</FONT></FONT><FONT face=3DArial,Helvetica><FONT = size=3D-1></FONT></FONT>=20 <P><FONT face=3DArial,Helvetica><FONT size=3D-1>Without any date code, = it is=20 mission impossible to trace which batch of the components=20 failed.</FONT></FONT><FONT face=3DArial,Helvetica><FONT = size=3D-1></FONT></FONT>=20 <P><FONT face=3DArial,Helvetica><FONT size=3D-1>Regards - Wee = Mei</FONT></FONT>=20 <P><A href=3D"mailto:[log in to unmask]">[log in to unmask]</A> wrote:=20 <BLOCKQUOTE TYPE=3D"CITE"><FONT face=3Darial,helvetica><FONT = size=3D-1>I guess my=20 first question is; If the datecodes currently mean different things=20 depending on the manufacturer, why not standardize what datecodes = really=20 mean rather than get rid of them?</FONT></FONT>=20 <P><FONT face=3Darial,helvetica><FONT size=3D-1>The paper talks = about all the=20 advances that have been made understanding root causes concerning=20 solderability issues, improved storage and handling methods, etc., = then why=20 do I continue to get moisture sensitive components from distributors = in=20 un-sealed packaging? But that's another issue...</FONT></FONT>=20 <P><FONT face=3Darial,helvetica><FONT size=3D-1>A recent issue here = at my=20 facility underscores the importance of a datecode on the part. We = build an=20 assembly for a customer that uses three 240-pin QFP DSP's from a = well known=20 manufacturer. So far, we've built-up over 200 assemblies for our = customer.=20 We shipped the assemblies to our customer and they integrated them = into the=20 higher level assembly, and discovered they don't work...not = communicating at=20 all with the rest of the system.</FONT></FONT>=20 <P><FONT face=3Darial,helvetica><FONT size=3D-1>Numerous phone calls = to the=20 manufacturer trying to find out what the problem could be resulted = in=20 "Nothing has changed with the part, the die hasn't changed,=20 nothing..."</FONT></FONT> <BR><FONT face=3Darial,helvetica><FONT = size=3D-1>Funny=20 thing was our first pre-production shipment of the assemblies worked = fine!!</FONT></FONT>=20 <P><FONT face=3Darial,helvetica><FONT size=3D-1>After looking a = little closer,=20 the first lot of assemblies contained DSP's that had a datecode that = was=20 2000 or earlier, everything that's failing are later...but still, = according=20 to the device manufacturer; "Nothing has changed..."</FONT></FONT>=20 <P><FONT face=3Darial,helvetica><FONT size=3D-1>If there wasn't a = datecode on=20 the part, we wouldn't know what we could put on the assemblies and = work.=20 There is a lot of effort being expended to try and isolate what the = problem=20 really is (with no help from the device supplier), but for now we = need to=20 find parts that work so that it doesn't shut down production, the = only solid=20 way (for now) is to find parts within a certain date = code.</FONT></FONT>=20 <P><FONT face=3Darial,helvetica><FONT size=3D-1>Now I'm faced with = the possible=20 task of reworking 200 assemblies, each with three 240-pin QFP's, = with a=20 early datecode part...fun stuff I know.</FONT></FONT>=20 <P><FONT face=3Darial,helvetica><FONT size=3D-1>-Steve = Gregory-</FONT></FONT>=20 <BR> <BR> =20 <BLOCKQUOTE=20 style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff = 2px solid; MARGIN-RIGHT: 0px"=20 TYPE=3D"CITE"><FONT face=3DArial><FONT color=3D#000000><FONT = size=3D-2>IPC has=20 become aware that the National Electronics Distributors = Association (NEDA)=20 has posted a white paper discussing the proposed lifting of date = code=20 restrictions and they have requested comments from end users as = well as=20 component suppliers and distributors. The paper can be viewed at = <A=20 = href=3D"http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/wh= itedat.html</A>.</FONT></FONT></FONT>=20 <P><FONT face=3DArial><FONT color=3D#000000><FONT = size=3D-2>Comments can be=20 provided to me on or off net; we'll compile them and forward to = NEDA. If=20 you comment to NEDA directly <A=20 href=3D"mailto:[log in to unmask],">[log in to unmask],</A> please = cc: me on=20 your reply <A=20 = href=3D"mailto:[log in to unmask]">[log in to unmask]</A>.</FONT></FO= NT></FONT>=20 <P><FONT face=3DArial><FONT color=3D#000000><FONT=20 size=3D-2>Cordially</FONT></FONT></FONT> <BR><FONT = face=3DArial><FONT=20 color=3D#000000><FONT=20 = size=3D-2>Jack</FONT></FONT></FONT></P></BLOCKQUOTE><BR> </BLOCKQUOT= E></BLOCKQUOTE></BODY></HTML> ------=_NextPart_000_0046_01C1F012.69EC0E80-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 05:57:17 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions Pardon my ettiquiteee. This post should not have happened. I keep forgetting I can reply from my outlook thing. MoonMan Actually, the first part about costs should apply, not the truck driving stuff though I'll see you, little girl in your bright red convertible, down the road soon if the economy gets worse. --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 05:58:58 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: The effect to printing from pas vs soldermask height X-To: [log in to unmask] Never had a problem with thousands of OSP/OCC boards non solder mask defined. MoonMan --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 06:01:46 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Via Plug X-To: [log in to unmask] Peter, As you say, no big change. Always used holes, especially on board edges say 1/4" wide copper strips, as heat pipes for convection and conduction to a cold wall. Also used mounting "studs" elsewhere when castings used so heat could be conducted to the casting from various hot areas in various board locations. Earl --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 06:13:17 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Bloomquist, Ken" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Bloomquist, Ken" <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C1F048.CB28E110" This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C1F048.CB28E110 Content-Type: text/plain; charset="iso-8859-1" I wonder how long it would take the component manufacturers to start marking date codes again if a problem was found within a part and they either had to test everything they had to sort out the problem and throw everything away and start over? I agree that having the suppliers sort for date codes because of assumed solderability problems is a problem but there really needs to be a date code. KennyB ------_=_NextPart_001_01C1F048.CB28E110 Content-Type: text/html; charset="iso-8859-1" <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> <META content="MSHTML 5.00.3105.105" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT color=#0000ff face=Arial size=2><SPAN class=889570813-30042002>I wonder how long it would take the component manufacturers to start marking date codes again if a problem was found within a part and they either had to test everything they had to sort out the problem and throw everything away and start over? I agree that having the suppliers sort for date codes because of assumed solderability problems is a problem but there really needs to be a date code.</SPAN></FONT></DIV> <DIV><FONT color=#0000ff face=Arial size=2><SPAN class=889570813-30042002></SPAN></FONT> </DIV> <DIV><FONT color=#0000ff face=Arial size=2><SPAN class=889570813-30042002>KennyB</SPAN></FONT></DIV></BODY></HTML> ------_=_NextPart_001_01C1F048.CB28E110-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 08:45:18 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Kathy Kuhlow <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Kathy Kuhlow <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=_207DDF1A.7C1D70F4" This is a MIME message. If you are reading this text, you may want to consider changing to a mail reader or gateway that understands how to properly handle MIME multipart messages. --=_207DDF1A.7C1D70F4 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Content-Disposition: inline There are many instances in everyone's career where we sorted by or found = problems with date codes. Many times that was the only sort criteria. = Just got bit again from a broker for a very old part, just finished our = 450 PC rework. =20 It also makes me very concerned having been in serious medical device = assembly. Now the proposal would allow what ever date code out and lose = that traceability for the next generation of pacemakers and various other = life support systems or military applications like a shuttle. The = manufacturer's may know more about handling, processing, etc but the = distributors don't know nor do the brokers. =20 Not one manufacturer out there is always providing 100% quality, there are = problems. The only thing that can make this a possibility in my mind = would be if the manufacturers are going to support all parts when an issue = comes up and the financial burden to remove all from inventory instead of = a specific batch. =20 Don't let them lose the date code that we all have come to depend on. Kathy =20 --=_207DDF1A.7C1D70F4 Content-Type: text/plain Content-Disposition: attachment; filename="TEXT.htm" <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 6.00.2715.400" name=GENERATOR></HEAD> <BODY style="MARGIN-TOP: 2px; FONT: 10pt MS Sans Serif; MARGIN-LEFT: 2px"> <DIV>There are many instances in everyone's career where we sorted by or found problems with date codes. Many times that was the only sort criteria. Just got bit again from a broker for a very old part, just finished our 450 PC rework. </DIV> <DIV> </DIV> <DIV>It also makes me very concerned having been in serious medical device assembly. Now the proposal would allow what ever date code out and lose that traceability for the next generation of pacemakers and various other life support systems or military applications like a shuttle. The manufacturer's may know more about handling, processing, etc but the distributors don't know nor do the brokers. </DIV> <DIV> </DIV> <DIV>Not one manufacturer out there is always providing 100% quality, there are problems. The only thing that can make this a possibility in my mind would be if the manufacturers are going to support all parts when an issue comes up and the financial burden to remove all from inventory instead of a specific batch. </DIV> <DIV> </DIV> <DIV>Don't let them lose the date code that we all have come to depend on.</DIV> <DIV> </DIV> <DIV>Kathy </DIV></BODY></HTML> --=_207DDF1A.7C1D70F4-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 07:34:32 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Crepeau, Phil" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Crepeau, Phil" <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C1F054.245BCE40" This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C1F054.245BCE40 Content-Type: text/plain; charset="iso-8859-1" hi, why doesn't neda encourage their members to offer two levels of pricing... one for orders that include date code requirements and one for orders that don't? the distributors can present the risks/benefits to their customers. i guess i'm too jaded to think that the distributors have anyone's interest at heart other than theirs. i suppose that eventually we will be told that it will be in our interest to eliminate date code requirements altogether. phil ------_=_NextPart_001_01C1F054.245BCE40 Content-Type: text/html; charset="iso-8859-1" <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> <META content="MSHTML 5.50.4134.600" name=GENERATOR></HEAD> <BODY> <DIV><FONT face=Arial color=#0000ff size=2><SPAN class=510362814-30042002>hi,</SPAN></FONT></DIV> <DIV><FONT face=Arial color=#0000ff size=2><SPAN class=510362814-30042002></SPAN></FONT> </DIV> <DIV><FONT face=Arial color=#0000ff size=2><SPAN class=510362814-30042002>why doesn't neda encourage their members to offer two levels of pricing... one for orders that include date code requirements and one for orders that don't? the distributors can present the risks/benefits to their customers. i guess i'm too jaded to think that the distributors have anyone's interest at heart other than theirs. i suppose that eventually we will be told that it will be in our interest to eliminate date code requirements altogether.</SPAN></FONT></DIV> <DIV><FONT face=Arial color=#0000ff size=2><SPAN class=510362814-30042002></SPAN></FONT> </DIV> <DIV><FONT face=Arial color=#0000ff size=2><SPAN class=510362814-30042002>phil</SPAN></FONT><FONT face=arial,helvetica><FONT lang=0 style="BACKGROUND-COLOR: #ffffff" face=Arial color=#000000 size=2 FAMILY="SANSSERIF"><BR></DIV></FONT></FONT></BODY></HTML> ------_=_NextPart_001_01C1F054.245BCE40-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 11:42:03 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, bbarr <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: bbarr <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: Jack Crawford <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000C_01C1F03C.0C79D6E0" This is a multi-part message in MIME format. ------=_NextPart_000_000C_01C1F03C.0C79D6E0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Please everyone, before there is mass hysteria, go back and reread the paper. Nobody is proposing doing away with date codes! Just the practice of ordering specific date codes unless there is a good reason for it. Bob ======================= Robert Barr Manufacturing Engineering Formation, Inc. Voice: 856-234-5020 x3035 Fax: 856-234-6679 -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Jack Crawford Sent: Monday, April 29, 2002 4:54 PM To: [log in to unmask] Subject: [TN] Proposed lifting of component date code restrictions IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at http://www.nedassoc.org/whitedat.html. Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly [log in to unmask], please cc: me on your reply [log in to unmask] Cordially Jack ========================================== APEX 2003 - the industry's premier trade show in Electronics Manufacturing, March 31-April 2, 2003, Anaheim, California. More information on website www.goapex.org -------- Jack Crawford, IPC Director of Assembly Standards and Technology 2215 Sanders Road, Northbrook IL 60062-6135 [log in to unmask] 847-790-5393 fax 847-504-2393 ------=_NextPart_000_000C_01C1F03C.0C79D6E0 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"> <META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR></HEAD> <BODY style=3D"MARGIN-TOP: 2px; FONT: 8pt MS Sans Serif; MARGIN-LEFT: = 2px"> <DIV><SPAN class=3D420073915-30042002><FONT face=3DArial size=3D2>Please = everyone,=20 before there is mass hysteria, go back and reread the paper. Nobody is = proposing=20 doing away with date codes! Just the practice of ordering specific date = codes=20 unless there is a good reason for it.</FONT></SPAN></DIV> <DIV> </DIV> <P><FONT = size=3D2>Bob<BR><BR>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D<BR>Robert=20 Barr<BR>Manufacturing Engineering<BR>Formation, Inc.<BR>Voice: = 856-234-5020=20 x3035<BR>Fax: 856-234-6679 </FONT></P> <BLOCKQUOTE dir=3Dltr=20 style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px = solid; MARGIN-RIGHT: 0px"> <DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT = face=3DTahoma=20 size=3D2>-----Original Message-----<BR><B>From:</B> TechNet=20 [mailto:[log in to unmask]]<B>On Behalf Of </B>Jack = Crawford<BR><B>Sent:</B>=20 Monday, April 29, 2002 4:54 PM<BR><B>To:</B>=20 [log in to unmask]<BR><B>Subject:</B> [TN] Proposed lifting of component = date=20 code restrictions<BR><BR></FONT></DIV> <DIV><FONT size=3D1>IPC has become aware that t</FONT><FONT = size=3D1>he National=20 Electronics Distributors Association (NEDA) has posted a white paper=20 discussing the proposed lifting of date code restrictions and they = have=20 requested comments from end users as well as component suppliers and=20 distributors. The paper can be viewed at <A=20 = href=3D"http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/wh= itedat.html</A>.</FONT></DIV> <DIV> </DIV> <DIV><FONT size=3D1>Comments can be provided to me on or off net; = we'll compile=20 them and forward to NEDA. If you comment to NEDA directly <A=20 href=3D"mailto:[log in to unmask],">[log in to unmask],</A> please = cc: me on=20 your reply <A=20 = href=3D"mailto:[log in to unmask]">[log in to unmask]</A>.<BR></FONT>= </DIV> <DIV><FONT size=3D1>Cordially</FONT></DIV> <DIV><FONT size=3D1>Jack</FONT></DIV> <DIV> </DIV> <DIV><FONT = size=3D1>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR>APEX = 2003 -=20 the industry's premier trade show in Electronics<BR>Manufacturing, = March=20 31-April 2, 2003, Anaheim, California.<BR>More information on website = <A=20 href=3D"http://www.goapex.org">www.goapex.org</A><BR>--------<BR>Jack = Crawford,=20 IPC Director of Assembly Standards and Technology<BR>2215 Sanders = Road,=20 Northbrook IL 60062-6135<BR><A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> = <BR>847-790-5393<BR>fax=20 847-504-2393</DIV></BLOCKQUOTE></FONT></BODY></HTML> ------=_NextPart_000_000C_01C1F03C.0C79D6E0-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 11:03:44 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Mel Parrish <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Mel Parrish <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: Kathy Kuhlow <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Just for grins, how many have run into variation in component materials and processes such as a different die source, adhesives, process profiles, cure, etc. within a specific date code? Scary, isn't it. Mel Parrish Soldering Technology International 102 Tribble Drive Madison, AL 35758 256 705 5530 256 705 5538 Fax [log in to unmask] www.solderingtech.com -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Kathy Kuhlow Sent: Tuesday, April 30, 2002 8:45 AM To: [log in to unmask] Subject: Re: [TN] Proposed lifting of component date code restrictions There are many instances in everyone's career where we sorted by or found problems with date codes. Many times that was the only sort criteria. Just got bit again from a broker for a very old part, just finished our 450 PC rework. It also makes me very concerned having been in serious medical device assembly. Now the proposal would allow what ever date code out and lose that traceability for the next generation of pacemakers and various other life support systems or military applications like a shuttle. The manufacturer's may know more about handling, processing, etc but the distributors don't know nor do the brokers. Not one manufacturer out there is always providing 100% quality, there are problems. The only thing that can make this a possibility in my mind would be if the manufacturers are going to support all parts when an issue comes up and the financial burden to remove all from inventory instead of a specific batch. Don't let them lose the date code that we all have come to depend on. Kathy --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 11:05:54 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Jack Crawford <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Jack Crawford <[log in to unmask]> Subject: TPCA Show 2002 and Forum X-To: [log in to unmask], [log in to unmask] X-cc: David Bergman <[log in to unmask]>, Mary Tunk <[log in to unmask]> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable The following message is posted at the request of David Bergman, IPC VP = Standards, Technology and International Relations. IPC is secretariate for = World Electronics Circuit Council (WECC). More info on IPC website, = search on WECC; here are a couple of shortcuts http://www.ipc.org/html/june= 99edit.htm and http://www.ipc.org/html/apr00edit.htm=20 Please contact Mary Tunk to receive the call for papers (attachments are = stripped off the forum msgs) and let me know if you have questions. Cordially Jack ############# Dear Colleagues, Subject: WECC Member Booth Stand in WECC Corner at TPCA Show 2002 We are going to have TPCA Show 2002 at Taipei World Trade Center (TWTC) = Exhibition Hall 1 and 2 from Oct 31. to Nov. 2, 2002. We warmly invite = you all the WECC member associations to the third TPCA Show this year. = Also, I would like to know if your association wishes to have a booth = stand at TPCA Show 2002 in the WECC corner. If your association would = like to have more booth, or wishes to have a new space, please let me know = as soon as possible. [log in to unmask] Besides, please see the call for paper of TPCA Show 2002 Forum and help us = to forward that to your members. Thanks for your kind attention. We are looking forward to seeing you in = TPCA Show Taipei. Best regards, Kevin Wang TPCA --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 11:27:07 -0500 Reply-To: "[log in to unmask]" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Kari Rambo <[log in to unmask]> Organization: Altron Inc Subject: Re: Proposed lifting of component date code restrictions MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit The paper is not suggesting that date codes be eliminated; only that restrictions not be put on components with respect to date codes. For example, many companies have policies stating if the date code indicates components are more than a year old, the component must be rejected. The white paper suggests that because of the advances in manufacturing and storing the components, they don't "get old" anymore, and that the date code doesn't really indicate the age of the component anyway (since the coding is not standardized). For these reasons, it is suggested that date code restrictions should not be placed on components. I don't believe the paper is implying that traceability could also be eliminated. (If it is, they're nuts). kjr -----Original Message----- From: Bloomquist, Ken [SMTP:[log in to unmask]] Sent: Tuesday, April 30, 2002 8:13 AM To: [log in to unmask] Subject: Re: [TN] Proposed lifting of component date code restrictions I wonder how long it would take the component manufacturers to start marking date codes again if a problem was found within a part and they either had to test everything they had to sort out the problem and throw everything away and start over? I agree that having the suppliers sort for date codes because of assumed solderability problems is a problem but there really needs to be a date code. KennyB << File: ATT00007.html >> --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 11:46:49 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: Dave Hillman <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: [log in to unmask] MIME-Version: 1.0 Content-type: text/plain; charset="us-ascii" Hi Jack! Just a comment echoing the TechNet chorus - a component date code is a tracking number which serves a multitude of purposes of which solderability aspects are just one specific issue. I am also quite skeptical of the white paper viewpoint of solderability being a "well understood" and "controlled" topic - if that were the case then why are there so many participants in the JSTD-002 committee involving the IPC, EIA, and JEDEC associations? Heavens knows I would like to work on other issues than solderability but I believe the white paper is offering a very, very skewed viewpoint of solderability issues within the electronic assembly industry. Dave Hillman JSTD 002A CoChairman [log in to unmask] --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 13:11:54 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Guy Ramsey <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Guy Ramsey <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: bbarr <[log in to unmask]> In-Reply-To: <[log in to unmask]> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0044_01C1F048.99A7B120" This is a multi-part message in MIME format. ------=_NextPart_000_0044_01C1F048.99A7B120 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit The proposal would relieve semi-conductor manufactures and distrubutors from keeping track of date codes once they were "in the supply chain". This would make it more difficult and expensive to get semiconductors manufactured before or after a specific date for any reason . . . I can think of many. -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of bbarr Sent: Tuesday, April 30, 2002 11:42 AM To: [log in to unmask] Subject: Re: [TN] Proposed lifting of component date code restrictions Please everyone, before there is mass hysteria, go back and reread the paper. Nobody is proposing doing away with date codes! Just the practice of ordering specific date codes unless there is a good reason for it. Bob ======================= Robert Barr Manufacturing Engineering Formation, Inc. Voice: 856-234-5020 x3035 Fax: 856-234-6679 -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Jack Crawford Sent: Monday, April 29, 2002 4:54 PM To: [log in to unmask] Subject: [TN] Proposed lifting of component date code restrictions IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at http://www.nedassoc.org/whitedat.html. Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly [log in to unmask], please cc: me on your reply [log in to unmask] Cordially Jack ========================================== APEX 2003 - the industry's premier trade show in Electronics Manufacturing, March 31-April 2, 2003, Anaheim, California. More information on website www.goapex.org -------- Jack Crawford, IPC Director of Assembly Standards and Technology 2215 Sanders Road, Northbrook IL 60062-6135 [log in to unmask] 847-790-5393 fax 847-504-2393 ------=_NextPart_000_0044_01C1F048.99A7B120 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Dwindows-1252" = http-equiv=3DContent-Type> <META content=3D"MSHTML 5.00.3105.105" name=3DGENERATOR></HEAD> <BODY style=3D"FONT: 8pt MS Sans Serif; MARGIN-LEFT: 2px; MARGIN-TOP: = 2px"> <DIV><FONT size=3D1><SPAN class=3D203100117-30042002>The proposal would = relieve=20 semi-conductor manufactures and distrubutors from keeping track of date = codes=20 once they were "in the supply chain". This would make it more = difficult=20 and expensive to get semiconductors manufactured before or after a = specific date=20 for any reason . . . I can think of many. </SPAN></FONT></DIV> <BLOCKQUOTE dir=3Dltr=20 style=3D"BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: = 0px; PADDING-LEFT: 5px"> <DIV class=3DOutlookMessageHeader><FONT face=3D"Times New Roman"=20 size=3D2>-----Original Message-----<BR><B>From:</B> TechNet=20 [mailto:[log in to unmask]]<B>On Behalf Of</B> bbarr<BR><B>Sent:</B> = Tuesday,=20 April 30, 2002 11:42 AM<BR><B>To:</B> = [log in to unmask]<BR><B>Subject:</B> Re:=20 [TN] Proposed lifting of component date code = restrictions<BR><BR></DIV></FONT> <DIV><SPAN class=3D420073915-30042002><FONT face=3DArial = size=3D2>Please everyone,=20 before there is mass hysteria, go back and reread the paper. Nobody is = proposing doing away with date codes! Just the practice of ordering = specific=20 date codes unless there is a good reason for it.</FONT></SPAN></DIV> <DIV> </DIV> <P><FONT = size=3D2>Bob<BR><BR>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D<BR>Robert=20 Barr<BR>Manufacturing Engineering<BR>Formation, Inc.<BR>Voice: = 856-234-5020=20 x3035<BR>Fax: 856-234-6679 </FONT></P> <BLOCKQUOTE dir=3Dltr=20 style=3D"BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; = MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"> <DIV align=3Dleft class=3DOutlookMessageHeader dir=3Dltr><FONT = face=3DTahoma=20 size=3D2>-----Original Message-----<BR><B>From:</B> TechNet=20 [mailto:[log in to unmask]]<B>On Behalf Of </B>Jack = Crawford<BR><B>Sent:</B>=20 Monday, April 29, 2002 4:54 PM<BR><B>To:</B>=20 [log in to unmask]<BR><B>Subject:</B> [TN] Proposed lifting of = component date=20 code restrictions<BR><BR></FONT></DIV> <DIV><FONT size=3D1>IPC has become aware that t</FONT><FONT = size=3D1>he National=20 Electronics Distributors Association (NEDA) has posted a white paper = discussing the proposed lifting of date code restrictions and they = have=20 requested comments from end users as well as component suppliers and = distributors. The paper can be viewed at <A=20 = href=3D"http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/wh= itedat.html</A>.</FONT></DIV> <DIV> </DIV> <DIV><FONT size=3D1>Comments can be provided to me on or off net; = we'll=20 compile them and forward to NEDA. If you comment to NEDA = directly <A=20 = href=3D"mailto:[log in to unmask],">[log in to unmask],</A> please = cc: me=20 on your reply <A=20 = href=3D"mailto:[log in to unmask]">[log in to unmask]</A>.<BR></FONT>= </DIV> <DIV><FONT size=3D1>Cordially</FONT></DIV> <DIV><FONT size=3D1>Jack</FONT></DIV> <DIV> </DIV> <DIV><FONT = size=3D1>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR>APEX = 2003 -=20 the industry's premier trade show in Electronics<BR>Manufacturing, = March=20 31-April 2, 2003, Anaheim, California.<BR>More information on = website <A=20 = href=3D"http://www.goapex.org">www.goapex.org</A><BR>--------<BR>Jack=20 Crawford, IPC Director of Assembly Standards and Technology<BR>2215 = Sanders=20 Road, Northbrook IL 60062-6135<BR><A=20 href=3D"mailto:[log in to unmask]">[log in to unmask]</A> = <BR>847-790-5393<BR>fax=20 847-504-2393</DIV></BLOCKQUOTE></BLOCKQUOTE></FONT></BODY></HTML> ------=_NextPart_000_0044_01C1F048.99A7B120-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 14:04:13 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: Mel Parrish <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Many times and more so recently. Sorry, no grins here. MoonMan ----- Original Message ----- From: "Mel Parrish" <[log in to unmask]> To: <[log in to unmask]> Sent: Tuesday, April 30, 2002 12:03 PM Subject: Re: [TN] Proposed lifting of component date code restrictions > Just for grins, how many have run into variation in component materials and > processes such as a different die source, adhesives, process profiles, cure, > etc. within a specific date code? > Scary, isn't it. > > Mel Parrish > Soldering Technology International > 102 Tribble Drive > Madison, AL 35758 > 256 705 5530 > 256 705 5538 Fax > [log in to unmask] > www.solderingtech.com > > -----Original Message----- > From: TechNet [mailto:[log in to unmask]]On Behalf Of Kathy Kuhlow > Sent: Tuesday, April 30, 2002 8:45 AM > To: [log in to unmask] > Subject: Re: [TN] Proposed lifting of component date code restrictions > > > There are many instances in everyone's career where we sorted by or found > problems with date codes. Many times that was the only sort criteria. Just > got bit again from a broker for a very old part, just finished our 450 PC > rework. > > It also makes me very concerned having been in serious medical device > assembly. Now the proposal would allow what ever date code out and lose > that traceability for the next generation of pacemakers and various other > life support systems or military applications like a shuttle. The > manufacturer's may know more about handling, processing, etc but the > distributors don't know nor do the brokers. > > Not one manufacturer out there is always providing 100% quality, there are > problems. The only thing that can make this a possibility in my mind would > be if the manufacturers are going to support all parts when an issue comes > up and the financial burden to remove all from inventory instead of a > specific batch. > > Don't let them lose the date code that we all have come to depend on. > > Kathy > > -------------------------------------------------------------------------- ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > -------------------------------------------------------------------------- ------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 13:09:00 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Mel Parrish <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Mel Parrish <[log in to unmask]> Subject: PWB Fab Resource MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Looking for a fine pitch board fab resource for matte Sn. Appreciate any information you may have and I'm available offline. Mel Parrish Soldering Technology International 102 Tribble Drive Madison, AL 35758 256 705 5530 256 705 5538 Fax [log in to unmask] www.solderingtech.com --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 14:16:43 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, James TerVeen <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: James TerVeen <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: bbarr <[log in to unmask]> MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Bob, I do agree with you. The way I read this white paper is they want to eliminate the use on date codes when ordering a part. They say nothing about eliminating the date code. Your take on this document is right on. Jim bbarr <bbarr@FORMATI To: [log in to unmask] ON.COM> cc: Sent by: Subject: Re: [TN] Proposed lifting of TechNet component date code restrictions <[log in to unmask] RG> 04/30/02 11:42 AM Please respond to "TechNet E-Mail Forum."; Please respond to bbarr Please everyone, before there is mass hysteria, go back and reread the paper. Nobody is proposing doing away with date codes! Just the practice of ordering specific date codes unless there is a good reason for it. Bob ======================= Robert Barr Manufacturing Engineering Formation, Inc. Voice: 856-234-5020 x3035 Fax: 856-234-6679 -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Jack Crawford Sent: Monday, April 29, 2002 4:54 PM To: [log in to unmask] Subject: [TN] Proposed lifting of component date code restrictions IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at http://www.nedassoc.org/whitedat.html. Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly [log in to unmask], please cc: me on your reply [log in to unmask] Cordially Jack ========================================== APEX 2003 - the industry's premier trade show in Electronics Manufacturing, March 31-April 2, 2003, Anaheim, California. More information on website www.goapex.org -------- Jack Crawford, IPC Director of Assembly Standards and Technology 2215 Sanders Road, Northbrook IL 60062-6135 [log in to unmask] 847-790-5393 fax 847-504-2393 --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 13:29:43 -0500 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: Richard Carruth <[log in to unmask]> Subject: Proposed lifting of component date code restrictions Mime-Version: 1.0 Content-type: text/plain; charset=us-ascii If manufacturers continue to provide date codes for their products but distributors discontinue tracking and segregation by date codes the result will be, mixed date code lots sent to the customer. In many cases assembly houses that use raw components must capture suspect material by date code. In the event of field failures or customer defects resulting in corrective action requirements it is usually imperative to know the problem parts date code to cover effectivity. I feel that the date codes application should be standardized. I have also seen where we needed to specifically order certain date codes because the later date code product did not function properly for the application. On the topic of old components verses new components. I have personally seen some pretty old, nasty components from brokers that appeared to have been previously used and some that were so oxidized that the leads were nearly black. So the solderability of 3 or more year old components is a concern. Date codes need to be standardized and tracked to ensure product quality and accountability. Regards, Richard Carruth Quality Engineer --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 21:55:25 +0200 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Gaby Bogdan <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Gaby Bogdan <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: David Douthit <[log in to unmask]> MIME-version: 1.0 Content-type: multipart/alternative; boundary="Boundary_(ID_vke/nhduJ4clxWR29vd4hw)" This is a multi-part message in MIME format. --Boundary_(ID_vke/nhduJ4clxWR29vd4hw) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Also, all components?? Today I dealt with a very trivial connector, solderability problems on specific batch, identified by date code. Advances, technology, et caetera... how much time would it have taken without the date code? Gaby ----- Original Message ----- From: David Douthit To: [log in to unmask] Sent: Tuesday, April 30, 2002 2:32 AM Subject: Re: [TN] Proposed lifting of component date code restrictions Jack, I agree with Steve's comments. The divergence between the commercial and high reliability electronics is a very serious issue. Any proposal that effects configuration control must be carefully weighed. Trying to save money no matter what the cost is a very easy trap to step into. Standardizing the date code process is needed. Use of date codes is needed for "life time" buys of COTS when obsolescence problems are present. Configuration control issues can also cause problems with commercial OEMs. Unless tracking methods are in place part failures by lot would be difficult to isolate in higher assemblies. This could create a much larger recall condition. Just some comments. David A. Douthit Manager LoCan LLC Jack Crawford wrote: IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at http://www.nedassoc.org/whitedat.html. Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly [log in to unmask], please cc: me on your reply [log in to unmask] ========================================== APEX 2003 - the industry's premier trade show in Electronics Manufacturing, March 31-April 2, 2003, Anaheim, California. More information on website www.goapex.org -------- Jack Crawford, IPC Director of Assembly Standards and Technology 2215 Sanders Road, Northbrook IL 60062-6135 [log in to unmask] 847-790-5393 fax 847-504-2393 --Boundary_(ID_vke/nhduJ4clxWR29vd4hw) Content-type: text/html; charset=iso-8859-1 Content-transfer-encoding: 7BIT <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 5.50.4207.2601" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY style="MARGIN-TOP: 2px; FONT: 8pt MS Sans Serif; MARGIN-LEFT: 2px" bgColor=#ffffff> <DIV><FONT face=Arial size=2>Also, all components??</FONT></DIV> <DIV><FONT face=Arial size=2>Today I dealt with a very trivial connector, solderability problems on specific batch, identified by date code.</FONT></DIV> <DIV><FONT face=Arial size=2>Advances, technology, et caetera... how much time would it have taken without the date code?</FONT></DIV> <DIV><FONT face=Arial size=2>Gaby</FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A [log in to unmask] href="mailto:[log in to unmask]">David Douthit</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A [log in to unmask] href="mailto:[log in to unmask]">[log in to unmask]</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, April 30, 2002 2:32 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [TN] Proposed lifting of component date code restrictions</DIV> <DIV><BR></DIV>Jack, <P>I agree with Steve's comments. The divergence between the commercial and high reliability electronics is a very serious issue. <BR>Any proposal that effects configuration control must be carefully weighed. Trying to save money no matter what the cost is a <BR>very easy trap to step into. <P>Standardizing the date code process is needed. <BR>Use of date codes is needed for "life time" buys of COTS when obsolescence problems are present. <P>Configuration control issues can also cause problems with commercial OEMs. <BR>Unless tracking methods are in place part failures by lot would be difficult to isolate in higher assemblies. <BR>This could create a much larger recall condition. <P>Just some comments. <P>David A. Douthit <BR>Manager <BR>LoCan LLC <P>Jack Crawford wrote: <BLOCKQUOTE TYPE="CITE"> <FONT size=-2>IPC has become aware that the National Electronics Distributors Association (NEDA) has posted a white paper discussing the proposed lifting of date code restrictions and they have requested comments from end users as well as component suppliers and distributors. The paper can be viewed at <A href="http://www.nedassoc.org/whitedat.html">http://www.nedassoc.org/whitedat.html</A>.</FONT> <FONT size=-2>Comments can be provided to me on or off net; we'll compile them and forward to NEDA. If you comment to NEDA directly <A href="mailto:[log in to unmask],">[log in to unmask],</A> please cc: me on your reply <A href="mailto:[log in to unmask]">[log in to unmask]</A>.</FONT><FONT size=-2>Cordially</FONT><FONT size=-2>Jack</FONT> <FONT size=-2>==========================================</FONT> <BR><FONT size=-2>APEX 2003 - the industry's premier trade show in Electronics</FONT> <BR><FONT size=-2>Manufacturing, March 31-April 2, 2003, Anaheim, California.</FONT> <BR><FONT size=-2>More information on website <A href="http://www.goapex.org">www.goapex.org</A></FONT> <BR><FONT size=-2>--------</FONT> <BR><FONT size=-2>Jack Crawford, IPC Director of Assembly Standards and Technology</FONT> <BR><FONT size=-2>2215 Sanders Road, Northbrook IL 60062-6135</FONT> <BR><FONT size=-2><A href="mailto:[log in to unmask]">[log in to unmask]</A></FONT> <BR><FONT size=-2>847-790-5393</FONT> <BR><FONT size=-2>fax 847-504-2393</FONT></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML> --Boundary_(ID_vke/nhduJ4clxWR29vd4hw)-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 15:43:35 -0400 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Earl Moon <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: Earl Moon <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: [log in to unmask] MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit always had a hard time with distributors and certs. no traceability possible often. no test data concerning solderability or whatever. customers partly to blame as price drives the whole thing with no recourse. moonman ----- Original Message ----- From: "Richard Carruth" <[log in to unmask]> To: <[log in to unmask]> Sent: Tuesday, April 30, 2002 2:29 PM Subject: [TN] Proposed lifting of component date code restrictions > If manufacturers continue to provide date codes for their products but > distributors discontinue tracking and segregation by date codes the result will > be, mixed date code lots sent to the customer. In many cases assembly houses > that use raw components must capture suspect material by date code. In the event > of field failures or customer defects resulting in corrective action > requirements it is usually imperative to know the problem parts date code to > cover effectivity. I feel that the date codes application should be > standardized. I have also seen where we needed to specifically order certain > date codes because the later date code product did not function properly for the > application. > > On the topic of old components verses new components. I have personally seen > some pretty old, nasty components from brokers that appeared to have been > previously used and some that were so oxidized that the leads were nearly black. > So the solderability of 3 or more year old components is a concern. Date codes > need to be standardized and tracked to ensure product quality and > accountability. > > Regards, > > Richard Carruth > Quality Engineer > > -------------------------------------------------------------------------- ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > -------------------------------------------------------------------------- ------- > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 15:21:58 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, "Mcmaster, Michael" <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: "Mcmaster, Michael" <[log in to unmask]> Subject: Re: Via Plug X-To: [log in to unmask] MIME-Version: 1.0 Content-Type: text/plain Peter That's exactly what I was getting at. Most of our applications for CB-100 are for filled vias that need to be plated over to provide a solderable surface and/or prevent solder from running out the bottom end of the via. > ---------- > From: [log in to unmask][SMTP:[log in to unmask]] > Reply To: TechNet E-Mail Forum.;[log in to unmask] > Sent: Monday, April 29, 2002 5:40 PM > To: [log in to unmask] > Subject: Re: [TN] Via Plug > > I just did a calculation for some of our boards that use this via plug > material for enhancing thermal transfer between chips and thermal planes. > The calculation was to see by how much I would have to increase hole > plating thickness by in order to completely replace the epoxy in terms of > thermal conductivity. > > I'm talking about a 24 mils diameter hole, plated initially to 1/2 oz > copper minimum and filled with epoxy. The board is 63 mils thick. Can you > guess what the increase is? ..... It's actually only 0.2 oz or 0.28 mils, > according to our thermal engineer. So why go to all the trouble and > expense > of filling holes if the only purpose is thermal - a fairly small increase > in plating thickness is all that's needed. > > Peter > > > > Earl Moon <[log in to unmask]> 30/04/2002 05:49 AM > Sent by: TechNet <[log in to unmask]> > > Please respond to "TechNet E-Mail Forum."; Please respond to Earl Moon > > To: [log in to unmask] > cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group) > Subject: Re: [TN] Via Plug > > > > > > > > > Don't mean to but in, but what the hell. Just think how much surface > copper > would be plated and how much resist would have to be applied and how much > plating overhang would be involved even with several resist layers > applied, > etc.. > > MoonMan > > -------------------------------------------------------------------------- > ------- > > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > ------- > > > > > > [This e-mail is confidential and may also be privileged. If you are not > the > intended recipient, please delete it and notify us immediately; you should > not copy or use it for any purpose, nor disclose its contents to any other > person. Thank you.] > > -------------------------------------------------------------------------- > ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: > SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > -------------------------------------------------------------------------- > ------- > --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 19:29:48 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: Vacuum sealing equipment... MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hi All! Our McDry dessicant cabinets have just been over-populated recently due to having to open vendor-sealed packages looking for certain DATECODE parts...(hmmm, this subject seems familiar for some odd reason...) Anyhoo, we've got a regular thermal sealer here, but we have now seen the need for a vacuum sealer... A vacuum sealer just gives me a warm and fuzzy feeling knowing that air has been sucked out of the packaging with a dessicant packed in there with the parts, sealed off from the outside world as we know it, and they're slowly suffocating, slowly.. slowly..slowly. The moisture being steadily drained from their lifeless and uncaring souls...HA!HA!HA!HA!HA! Ahem, 'scuse me. Kinda' got carried away there, didn't I? Didn't mean to...really...my job isn't getting to me, it really isn't...honest. I did a search and got a gazillion hits for vacuum sealers, do any of you have one that you can recommend and like, to help me from having to make too many decisions? 'preciate it!!! -Steve Gregory- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 17:02:00 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, David Douthit <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: David Douthit <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: Mel Parrish <[log in to unmask]> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353" Content-Transfer-Encoding: 7bit Mel, Careful, configuration control is a very touchy subject!!! David A. Douthit Manager LoCan LLC Mel Parrish wrote: > Just for grins, how many have run into variation in component materials and > processes such as a different die source, adhesives, process profiles, cure, > etc. within a specific date code? > Scary, isn't it. > > Mel Parrish > Soldering Technology International > 102 Tribble Drive > Madison, AL 35758 > 256 705 5530 > 256 705 5538 Fax > [log in to unmask] > www.solderingtech.com > > -----Original Message----- > From: TechNet [mailto:[log in to unmask]]On Behalf Of Kathy Kuhlow > Sent: Tuesday, April 30, 2002 8:45 AM > To: [log in to unmask] > Subject: Re: [TN] Proposed lifting of component date code restrictions > > There are many instances in everyone's career where we sorted by or found > problems with date codes. Many times that was the only sort criteria. Just > got bit again from a broker for a very old part, just finished our 450 PC > rework. > > It also makes me very concerned having been in serious medical device > assembly. Now the proposal would allow what ever date code out and lose > that traceability for the next generation of pacemakers and various other > life support systems or military applications like a shuttle. The > manufacturer's may know more about handling, processing, etc but the > distributors don't know nor do the brokers. > > Not one manufacturer out there is always providing 100% quality, there are > problems. The only thing that can make this a possibility in my mind would > be if the manufacturers are going to support all parts when an issue comes > up and the financial burden to remove all from inventory instead of a > specific batch. > > Don't let them lose the date code that we all have come to depend on. > > Kathy > > --------------------------------------------------------------------------------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 17:10:13 -0700 Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, David Douthit <[log in to unmask]> Sender: TechNet <[log in to unmask]> From: David Douthit <[log in to unmask]> Subject: Re: Proposed lifting of component date code restrictions X-To: [log in to unmask] MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="------------6250E4B547CBBED67430FC62" --------------6250E4B547CBBED67430FC62 Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353" Content-Transfer-Encoding: 7bit Dave, Thank you for this; I believe the white paper is offering a very, very skewed viewpoint of solderability issues within the electronic assembly industry. Self serving papers are all over the place. Some, such as this one, can create massive problems if followed. Unfortunalty certain management types (particularly in the current business climate) will grab anything that looks good. This wastes time that we can ill afford. David A. Douthit Manager LoCan LLC Dave Hillman wrote: > Hi Jack! Just a comment echoing the TechNet chorus - a component date code > is a tracking number which serves a multitude of purposes of which > solderability aspects are just one specific issue. I am also quite > skeptical of the white paper viewpoint of solderability being a "well > understood" and "controlled" topic - if that were the case then why are > there so many participants in the JSTD-002 committee involving the IPC, > EIA, and JEDEC associations? Heavens knows I would like to work on other > issues than solderability but I believe the white paper is offering a very, > very skewed viewpoint of solderability issues within the electronic > assembly industry. > > Dave Hillman > JSTD 002A CoChairman > [log in to unmask] > > --------------------------------------------------------------------------------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/html/forum.htm for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > --------------------------------------------------------------------------------- --------------6250E4B547CBBED67430FC62 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Dave, <p>Thank you for this; <i>I believe the white paper is offering a very,</i> <br><i>very skewed viewpoint of solderability issues within the electronic</i> <br><i>assembly industry.</i><i></i> <p>Self serving papers are all over the place. Some, such as this one, can create <br>massive problems if followed. Unfortunalty certain management types <br>(particularly in the current business climate) will grab anything that looks good. <br>This wastes time that we can ill afford. <p>David A. Douthit <br>Manager <br>LoCan LLC <br> <br> <p>Dave Hillman wrote: <blockquote TYPE=CITE>Hi Jack! Just a comment echoing the TechNet chorus - a component date code <br>is a tracking number which serves a multitude of purposes of which <br>solderability aspects are just one specific issue. I am also quite <br>skeptical of the white paper viewpoint of solderability being a "well <br>understood" and "controlled" topic - if that were the case then why are <br>there so many participants in the JSTD-002 committee involving the IPC, <br>EIA, and JEDEC associations? Heavens knows I would like to work on other <br>issues than solderability but I believe the white paper is offering a very, <br>very skewed viewpoint of solderability issues within the electronic <br>assembly industry. <p>Dave Hillman <br>JSTD 002A CoChairman <br>[log in to unmask] <p>--------------------------------------------------------------------------------- <br>Technet Mail List provided as a free service by IPC using LISTSERV 1.8d <br>To unsubscribe, send a message to [log in to unmask] with following text in <br>the BODY (NOT the subject field): SIGNOFF Technet <br>To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL <br>To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest <br>Search the archives of previous posts at: <a href="http://listserv.ipc.org/archives">http://listserv.ipc.org/archives</a> <br>Please visit IPC web site <a href="http://www.ipc.org/html/forum.htm">http://www.ipc.org/html/forum.htm</a> for additional <br>information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 <br>---------------------------------------------------------------------------------</blockquote> </html> --------------6250E4B547CBBED67430FC62-- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 --------------------------------------------------------------------------------- ========================================================================= Date: Tue, 30 Apr 2002 23:14:12 EDT Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask] Sender: TechNet <[log in to unmask]> From: [log in to unmask] Subject: A "NEDA" Oriented label... MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Was given a image of a label on packaging that's out there as we speak, as something that would be more wide-spread if NEDA has their way...go to: http://www.stevezeva.homestead.com and look at NEDA label.jpg... Really helps, doesn't it? -Steve Gregory- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------