We have recently designed a 6U board that has the J1 & J2 compact PCI connectors on it. I used the manufacturers spec for the hole sizes and the board shop fabricated within the tolerance and specification. The problem is we can not get the connectors to actually press into the holes. I would appreciate input from anyone who has some experience with these connectors! My understanding of the press tool was that it was nothing other than a flat piece of metal in a bench press. Is that correct? What finished hole sizes are being used? With all manufacturers? I have noticed some dimensional differences in the drawings between Erni & FCI/Berg. Can anyone give me an idea of what the press tools actually look like? TIA Dee Stover [log in to unmask] Associate Technician Design National Optical Astronomy Observatory 950 N Cherry Ave Tucson, AZ 85719 520-318-8489 FAX 520-318-8303 --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------