Olivia Amendment 1 to 610C identifies 2.5mm as the correct value. The amendment was released a couple of months ago and is available on the IPC web site. By the way, work is in progress toward Revision D to this document. We have accumulated a number of comments and would appreciate any additional information that you would like to see in the new 610. We certainly could use some additional information on the newer technology applications. The next technical meeting will be at APEX on 19 Jan. Mel Parrish Soldering Technology International Madison, AL 256 705 5530 256 705 5538 Fax [log in to unmask] -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Olivia Mc Dermott Sent: Wednesday, January 09, 2002 5:41 AM To: [log in to unmask] Subject: [TN] Lead Length/Protrusion Hi ALl, Why are there 2 references to lead length/protrusion in IPC-A-610C. In 'Component Installation Location/Orientation' - point 5.2.7.1 table 5.2 lead protrusion for class 2 is 2.5mm but in 'Soldering' point 6.2 table 6.1 lead protrusion for class 2 is 2.3mm. Which one do we use? _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To recieve ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To recieve ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------