Kathy, The assembly is not conformally coated. It is a meter display in which we build the PCB and then box build & system test. It is for distribution around the UK. >From: Kathy Kuhlow <[log in to unmask]> >Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>, Kathy Kuhlow ><[log in to unmask]> >To: [log in to unmask] >Subject: Re: [TN] Flux residue with a no-clean process >Date: Wed, 30 Jan 2002 08:19:46 -0600 > >IPC-610 has no-clean residues as acceptable. Is it possible that flux may >have been mixed with a washable? Washing a no-clean off is more >detrimental than leaving it alone. > >Is the assembly conformally coated? Is the application intended to be in a >wet or high humidity/moisture enviroment? > >Kathy ><< TEXT.htm >> _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------