In a message dated 12/6/2001 9:48:10 AM US Eastern Standard Time, [log in to unmask] writes: << #2- Has anyone out there ever installed refelctive metal plates in their UV oven to limit shadowing? >> I have used both types of coating that you list, and I prefer the heat cure option because it gives me control over the cure process. The moisture cure secondary simply took too long and I had the dripping problem you described. I did add reflective plates inside the UV section of the oven. I calculated the bes angle from the position of my UV bulb to get the light reflected at a very low angle so that it would go under the edge of some parts. I used standard mirror tiles, and it worked well. Jon Moore --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------