Okay, which is faster, cheaper, lower risk: procuring a silicone removal product to remove possible silicone contamination from the circuit board or finding an outside circuit board facility with plasma cleaning capability; cost of cleaner and time to clean versus outside plasma and shipping; and risk - risk of cross contamination to an IC process (high "severity" should it happen) vs sending parts out for cleaning. I'm gonna stick with..."don't come near my IC process with that filthy circuit board"! Jana Carraway Micro Systems Engineering, Inc. -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Sauer, Steven T. Sent: Monday, December 17, 2001 12:45 PM To: [log in to unmask] Subject: Re: [TN] Cleaning after plasma Good Afternoon Doug, My initial instinct is to go right along with Phil and Jana, silicone contamination is an ugly beast. But if you're hellbent on plasma, there is a company in Indy not far from good 'ol NAC (north of Raymond and east of I-65), called Dynaloy, Inc. They manufacture products for the removal of silicones (along with acrylics, epoxies and urethanes). --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------