See IPC spec. SM-840 C Leo Roos ----- Original Message ----- From: "Cheryl White" <[log in to unmask]> To: <[log in to unmask]> Sent: Thursday, October 25, 2001 1:36 PM Subject: [TN] Chloride levels > Is there a standard for acceptable levels of chloride on assembled PCBs and > on bare boards? What sources of chlorides exist in a board fabrication > process, and in an assembly process? > > We are using a no-clean low-solid flux. > > Thanks, > Cheryl White > Manufacturing Engineering > DSC Ltd. > [log in to unmask] > (905) 760-3000 ext. 7228 > > -------------------------------------------------------------------------- ------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL > Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > -------------------------------------------------------------------------- ------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------