I need to nail down what an insufficient solder defect is. We are dealing with through components. We are seeing good solder fillets on the component side. But, there is a concave dip 360 degrees around the lead of the secondary side of the board. - (the solder doesn't fill completely to the top to be level with the board.) There is a small fillet that goes around the lead 360 degrees. This is not illistrated in IPC-A-610 wheater is it a defect. Would anyone else consider this a defect? Can anyone help clarify? --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------