Thank you Brian,
I agree with your items mentioned, however it is difficult to convince the customer of this (you know the drill). We will continue expanding our test parameters (without heating) and will hopefully come up with an acceptable mutual resolve soon.
Thanks again,
Steve
Steve Challis
Quality Engineer
Saturn EE, Corp. Offices
Direct: 248-299-1039
Page: 810-769-4249
e-mail: [log in to unmask]
pager e-mail: [log in to unmask]
-----Original Message-----
From: Brian Ellis [mailto:[log in to unmask]]
Sent: Tuesday, May 01, 2001 2:03 AM
To: [log in to unmask]
Subject: Re: [TN] Ionic Testing
Steve
Theoretically, a heated solution may be better, but it is far less
practical than room-temperature. The disadvantages are:
1) very much greater risk of fire
2) selective evaporation of the IPA requires much more frequent solution
maintenance
3) lower ion exchange efficiency
4) complex (non-linear) temperature compensation required (which
commercial instruments do not offer)
5) reduced equipment life
6) better ventilation required
7) greater leaching of ions from substrate material, giving irrelevantly
high readings.
The one advantage is that the tests are more rapid.
As an ex-manufacturer of such testers, I advise strongly against
heating.
Brian
Steve Challis wrote:
>
> Hello All,
> This question concerns assembled PCBs.
> I (we) have some concerns over the standards surrounding Ionic
> Contamination. Some conversations over heated vs nonheated have been
> brought up, however it is clear to me that heated is the superior test
> method. The temperature for the heated test method is the question. Does
> anyone know exactly what the desired temperature is? If so, what would be
> the source reference document and where do I find it?
> Thanks, in advance.
> Steve
>
> ---------------------------------------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> ---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------