Phil, Haven't heard of the book. Have you tried buying it on the net through one of the online bookshops? This sounds like a case of someone wanting one thing and asking for another. I presume that the PCB will be inside some sort of casing. If I'm correct the deceleration depends upon the stiffness of the casing and the way the PCB is mounted (have you considered shock mounts?). It sounds like the specifier is trying to simulate a drop from a certain height. If they are it would be simpler just to do exactly that, drop from a certain height onto a certain surface, a certain number of times.. Regards, > > > Thankyou to all who replied to my posting. > Some of the specs (eg duration)of the shock loading are still vague. > Loading is based on the deceleration of a unit hitting the ground at > approx > 50 ft/sec. > Another concern is that there is a crystal oscillator on the board, and > there are concerns on how the crystal will stand up to this shock. > I've found out that there has been a handbook produced, 'High Shock > Electronics Design Guide' by Mr D. Reyerson of Sandia, that would be of > help. Is anyone familiar with this guide, or can let me know how I can > obtain a copy? > > thanks, > > Phil. > > > Phil Dutton C.I.D. > Senior CAD Technician > IPC Certified Interconnect Designer Eric Christison --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------