Everyone,

I'm having an interesting problem with fall out from production.  There is one leg on one component in one position (with others of the same component with no problem) that appears to have a wetting problem.  However, the fillets are well formed (not beaded up).  There is a crack under the solder pad, though.  Also, the solder has a flaky appearance.  If you are interested, I could send a picture of the joint directly to your email, let me know.  We've had about 10 failures in production with one field return already.

Thanks,

Kevin

Kevin Stokes
Reliability Manager
Kimball Electronics Group
[log in to unmask]
(812) 634-4207