Lon,

A good place to start is the IPC-7095.  This will get you thinking about all
of the right things.

Spencer
  -----Original Message-----
  From: TechNet [mailto:[log in to unmask]]On Behalf Of Lon Weffers
  Sent: Monday, February 12, 2001 9:33 AM
  To: [log in to unmask]
  Subject: [TN] FW: BGA production start



  -----Oorspronkelijk bericht-----
  Van: Lon Weffers [mailto:[log in to unmask]]
  Verzonden: maandag 12 februari 2001 14:19
  Aan: TechNet
  Onderwerp: BGA production start


  Dear Technetters,

  Our staff is considering to start assembling pcb's with BGA's.
  What kind of problems can I expect and what equipment do I need. ( also
rontgen inspection) Does anyone of you have information about the processes
around BGA's. Any advice would be welcome.

  Thanks in advance

  Lon Weffers
  Matas Electronics bv
  The Netherlands