Linda: - You might check the acceptance criteria of Revision C of IPC-A-610 as the coverage in A-610 is more comprehensive than the J-STD-001. In creating Rev. C of A-610 we spent quite a bit of effort and developed some pretty good illustrations of solder connections using magnet wire. Connections for through-hole termination, termination to terminals and terminations to component leads (as in Jumper Wires/Hay Wires) are now included in A-610C. - If you have any specific questions that are not answered by the A-610 Standard please feel free to contact me off-line. Regards, Jim Moffitt, Moffitt Consulting Service (317/773-5570)