Hi Ketan, We use a land size of 0,40 x 1,80 mm. (acc. to IPC-SM-782 revision A) Ketan Bhatt wrote: > > Dear Tech Netters, > > Happy new years to all !! > > We are using 80 pin MQFP where pin width is 0.38 mm and the gap betwen two pins are 0.65 mm. > > What should be the size of pad? > > Thanks ane regards, > > Ketan Bhatt > Secure Meters Limited > India > > --------------------------------------------------------------------------------- > Technet Mail List provided as a free service by IPC using LISTSERV 1.8d > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL > Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > --------------------------------------------------------------------------------- Best Regards, Marius Geurts Manufacturing Quality Engineer Electronics Research & Development Oce Technologie B.V. The Netherlands IPC member --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------