Note that IPC 6012 is used in conjunction with IPC-A-600F. The former is based more on quantitative measures, and the latter primarily used for guidance of conditions apparent using visual inspection. Tim Nair Quality Engineer TTM Technologies Inc. -----Original Message----- From: TechNet [mailto:[log in to unmask]]On Behalf Of Rick Howieson Sent: Friday, January 19, 2001 9:43 AM To: [log in to unmask] Subject: [TN] IPC-600 If a fabricator states the boards are built to IPC-A-600 are the requirements of 6010 series assumed/required? This is how I interpret IPC-A-600F Section 1.5. Rick Howieson Delta Group Electronics, Inc. ---------------------------------------------------------------------------- ----- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------- ----- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------