Hi Everyone! There is a company that I know that makes a welder that enables you to make repairs to circuit board traces by using parallel gap bonding. I had posted a question about welding a nickel strap to a pad a couple of days ago but I received no response. I believe that the repair method falls in the line of what I want to do, does anyone have any experience in this method of bonding? I particularly want to know if IPC has any guidelines to acceptability to a weld joint versus a solder joint. Is there anything I should be cautious about doing this method? Could this method damage the pad or substrate? Below is some info a grabbed off a web-site explaining this method. The Parallel Gap Resistance microjoining technique can be used to perform Resistance Welding, Thermocompression Bonding, Resistance Brazing or Reflow Soldering. All of these processes use different combinations of Temperature, Pressure and Time to achieve the final result. The primary applications for parallel gap microjoining are to bond fine wire and ribbon to: Hybrid or Microwave circuitry Thin or thick film substrates Potentiometers and other miniature components Semi-rigid substrates Fine line printed circuit traces It is also used to weld flat packs to printed circuit boards and parallel gap reflow solder small parts. The materials which can be bonded with the parallel gap technique include: copper, gold, gold-plated dumet, gold-plated Kovar, platinum, silver, nichrome and pyrofuse. Thanks for your help!! Jim West ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################