HADCO is capable of doing buried resistance and buried capacitance. Patrick Lam Phone:(604)293.4392 -----Original Message----- From: gacrowell [mailto:[log in to unmask]] Sent: Wednesday, September 20, 2000 3:53 PM To: [log in to unmask] Subject: Re: [TN] Embedded Resistors We do the same, use BR as the ref des. Anyone care to recommend a board house that does buried resistance? Gary Crowell Micron Technology -----Original Message----- From: Lam, Patrick [mailto:[log in to unmask]] Sent: Wednesday, September 20, 2000 3:52 PM To: [log in to unmask] Subject: Re: [TN] Embedded Resistors George, On the schematic, we use designator BR for all buried resistors, and we simply strip out all the BR's from the BOM. Hope this help. Patrick Lam -----Original Message----- From: Kotecki, George [mailto:[log in to unmask]] Sent: Wednesday, September 20, 2000 2:18 PM To: [log in to unmask] Subject: [TN] Embedded Resistors Greetings, I am looking for a little help regarding embedded resistors. This is not a true design issue but rather an information issue. We intend to treat them as parts as far as the CAD system is concerned as opposed to a feature. On the schematic, each resistor will have the usual set of attributes: ref des, value, tol, pin num. When we run our parts list, these show up as discrete parts. What schemes are used to make sure they are for internal use only and some purchasing agent won't try to buy them? TIA! > George Kotecki > Section Manager > Systems Engineering > Defensive Systems Division-RMS > Northrop Grumman Corporation > *office:(847)259-9600 x4276 * fax:(847)870-5720 > *e-mail: [log in to unmask] > > ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################