Thank you, Ivan!

-----Original Message-----
From: Ivan Barrios [mailto:[log in to unmask]]
Sent: Friday, August 11, 2000 9:42 AM
To: [log in to unmask]
Subject: [TN] Component distances for wave soldering


Gary:

Check out
http://www.autogroup.com/designguideb/

http://www.datumdynamics.com/
Gary Smith Wrote:

"Date:    Thu, 10 Aug 2000 14:21:11 -0400
"From:    "Smith, Gary" <[log in to unmask]>
"Subject: Component distances for wave soldering
"MIME-Version: 1.0
"Content-Type: text/plain; charset="iso-8859-1"

"Hello all,

"Trying to get some info or reference sites for suggested distances between
"components for wave soldering depending on their orientation to the wave.

"I know that if they are facing the wave on the short side of the component
"with the leads on the sides the components can be put closer together.
The
"question is, what are the recommended distances?

"I found an acrobat reader document on the web, but the distances are
"unreadable.

"Thanks,

"-Gary

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################