Dear Tech Net, I do have another question, since obviously reading specs is not my cup of tea. What sort of electrical testing will be performed per following note??? Will be this board (10 layers, smt on both sides) netlist tested? We specify : Note 1/ Unless otherwise specified, this PWB was designed per IPC-2221, IPC-2222 and should be manufactured in accordance with IPC-6011, IPC-6012 Class 2. According to IPC-6012 the board should be electricly tested for 3.9.1 Dialectric withstanding voltage 3.9.2 Circuitry IPC-ET-652 3.9.2.1 Continuity 3.9.2.2 Isolation 3.9.3 Circuit /plated through shorts to Metal substrate 3.9.4 Insulation Resistance. Will be this board (10 layers, smt on both sides) netlist tested? Thank you Mirka -- | Mirka Halas TSI TelSys Incorporated | | Senior PCB Designer 7100 Columbia Gateway Dr. | | [log in to unmask] Columbia, Maryland 21046 | | http://www.tsi-telsys.com (410) 872-3900: Main | | (410) 872-3922: Direct (410) 872-3901: FAX | -=+=-*********************************************************-=+=- ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################