You will no doubt get a lot of responses to this one. The reason why the immersion gold usually specified on pwb drawings as the finish is to protect the delicate nickel beneath it from oxidizing to the point that wetting is hindered when trying to assemble the boards using a solder process. If the boards are built already, and functioning, it would be a shame on all involved if they were not dispositioned as "use as is". As was already stated, as soon as molten solder comes into contact with the immersion gold, the gold is gone which takes away the leg your customer was using as the reason (especially if these are SMOBC boards). We've built RF CCAs for many years and have never seen the circuitry yet that required the nickel gold for the skin effect property differences between HASL and NiAu. Corrosion resistance is not a justification for reworking loaded functioning boards. We use the copper nickel gold because of the inherent problems with immersing thin non soldermasked PTFE boards with very fine line filter circuitry into a molten bath of solder. Your customer still does not have a clue but I hope you are not confused anymore. If you still find that you have to apply gold to your loaded assemblies, respond accordingly and we can point you in the right (??) direction. At 09:55 AM 6/8/00 -0700, Ralph Richart wrote: >We have answers.... > >So I had a long talk with my customer this morning to provide input >based on the invaluable advice from you all. > >I said - "is there a specific reason for choosing 3-8u" of immersion >gold over tin/lead solder?" >He said - "absolutely, the gold provides corrosion resistance, the gold >does not" >I said - "even such a thin amount - only 3-8u"?" >He said - "definitely, all we need is the coverage, the thickness is >irrelevant" > >Is this true? > >Needless to say, we are rebuilding the parts as we speak. Rework sounds >difficult to say the least, although I may try to come up with some >scheme for fun as they have a bunch of boards that are no good right >now. > >thanks for all the help..... > >ralph > >PS - more on the larrylobster story later; it's more silly than anything >else. Paul's poem may soon become our own, however. Very funny! > >Off to build some boards.... > >############################################################## >TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c >############################################################## >To subscribe/unsubscribe, send a message to [log in to unmask] with following >text in >the body: >To subscribe: SUBSCRIBE TECHNET <your full name> >To unsubscribe: SIGNOFF TECHNET >############################################################## >Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional >information. >If you need assistance - contact Keach Sasamori at [log in to unmask] or >847-509-9700 ext.5315 >############################################################## > ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################