Werner- T-260 is a time to delamination test, a sample is heated at 10 or 20 C/ min and held at 260 C until there is a catastrophic failure (delam), the time is calculated, and gives a relative sense of how well the parts were processed. At 19:23 6/14/2000 EDT, you wrote: >Hi Mark, >I have been around for a long time but have never heard of a "T260" test. >What exactly do you mean by this? >Werner Engelmaier > >############################################################## >TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c >############################################################## >To subscribe/unsubscribe, send a message to [log in to unmask] with following text in >the body: >To subscribe: SUBSCRIBE TECHNET <your full name> >To unsubscribe: SIGNOFF TECHNET >############################################################## >Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional >information. >If you need assistance - contact Keach Sasamori at [log in to unmask] or >847-509-9700 ext.5315 >############################################################## > Ian A. McMillan Engineer Herco Technology Ph# 858-679-2800 ext. 107 Fax# 858-679-7565 ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################