Hello all, I am having trouble finding design specs for an oval component lead going into an oval hole. The component is an indictor that is about 25mm in diameter and the lead is made by soldering two 16ga wires together. The shape of the lead is more like a rectangle with a full radius at the short sides than an oval and the hole in the pcb is the same shape. My task is to evaluate a design, that is already in production, to see if it should be changed and make recommendations if so. However, I have not been able to find anything in my IPC manuals that approaches this situation. My question then, is what guidelines for layout should I use? Any help will be appreciated. Richard Hawkins ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################