Avigdor Jakubinsky Infogear Technology (SISCO) Lead Free Solder from ALPHA http://www.alphametals.com/products/solderbw.html Best Regards ??? ?? ?? ?????2 ? wrote: > > Keach > The following is what appeared on Technet when I replied to Mr. FuJio's > question. > Besides Jonathan's, I had a few auto-replys from other people. > Most of them were about his/her absence at his/her office. > > Minsu Lee > > -----Original Message----- > From: Jonathan A Noquil [mailto:[log in to unmask]] > Sent: Thursday, March 02, 2000 9:06 AM > To: 이민수 차장 자 연구소연구2팀 > Subject: Re: [TN] DK measurement at 2GHz > > Has anyone knows about lead free solder suppliers (High tenp lead free > solders) > > Minsu Lee <[log in to unmask]> on 03/02/2000 07:55:47 AM > > Please respond to > You can use HP 4291B Impedance/Material Analyzer up to 1.8 Ghz. > It is easy to use and reliable. > The Dk and Df value at 1.8 Ghz is about the same as those at 2 Ghz. > Therefore, I suppose you can do it with 1.8Ghz. > If you have to measure at 2Ghz, then use Dr. Bereskin's method. > The method has been presented at IPC meeting last spring. > Or you can directly contact Dr. Bereskin to do a measurement. > As for his address, please refer to the paper. > > Minsu Lee > Manager > R&D #2 Team > Doosan Electro-Materials Co. > > > ** Original Subject: [TN] DK measurement at 2GHz > > ** Original Sender: "Kuwako, Fujio(MMS)" <[log in to unmask]> > > ** Original Date: Wed, 1 Mar 2000 09:35:49 +0900 (KST) > -----Original Message----- > Snap.. > > From: Keach Sasamori [mailto:[log in to unmask]] > Sent: Friday, April 28, 2000 3:24 AM > To: [log in to unmask] > Subject: Re: [TN] Please let me post my opinions/questions/answers without > anyinterruption. > > Minu-Lee: > > I checked your subscription options on the list, and you are set up the > same as the 7 other people from your company. I did notice little thing that > might make a difference. Your name is registered with English characters as > Minsu Lee on the Listserv, but your name on the e-mail which was sent was > unreadable. Are you using some Korean characters or a plug-in which converts > your name to Korean characters? That might explain why you are having > trouble, the Listserv computer may not recognize you when you try to post. > > Can you send me the specific error messages that you get when you try to > post? I can try to figure it out, but I need some more details. > > Keach Sasamori > IS Administrator > IPC > 2215 Sanders Rd. > Northbrook, IL 60062-6135 > Ph: (847) 790-5315 > Fax: (847) 509-9798 > e-mail: [log in to unmask] > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional > information. > If you need assistance - contact Keach Sasamori at [log in to unmask] or > 847-509-9700 ext.5315 > ##############################################################