Hey, Paul! Now you got me scared. I hoped that Hals und Beinbruch was for good chance. You write about multiple passes, -in short, the process is time related. Do I have to fear that if the test takes a long time, I might damage good parts? Thanks, Gaby Paul Klasek wrote: > Take it from you Werner, glad you pull from golf to see us; > > 3D machine's orbiting view can see cracks from substrate, > with the kind human or inhuman experience you and Jerry noted; > with metal tops it could be still a hazy vision at the best ? > The likelihood of high efficiency top sinks (metal) > increasing popularity seems logical, to me (deluded or not), > meaning to be very interesting for multilayered patients diagnosis? > > Did you come across damage factors on X pass repetitions ?, > i know in med you can burn the bone with multipasses, > (know cases with 4-6 pass wrist X burns); > with the intensities required through the metal tops, > if they are Xable, > (wonder what's Altera's view on X,seen somebuddy here on Net,please,) > would there be a possibility of internal damage of ever finer paths ? > > I realize this is commercially sensitive laundry, > hints are good enough answers > (even no comment, come to think of it) > > paul > > -----Original Message----- > From: [log in to unmask] [mailto:[log in to unmask]] > Sent: Thursday, 1 June 2000 10:17 > To: [log in to unmask]; [log in to unmask] > Subject: Re: [TN] To X-ray or Not to X-ray. > > Hi Paul, Steve & others, > It all depends on your volume and the level of assurance you need/want. > There > is no question that for some people's operation spending that kind of money > is overkill, on the other hand there is no question that X-ray inspection > with the proper recognition algorithm(s) and settings can improve the > quality > of the outgoing solder joints better than any other technique. > Werner Engelmaier > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional > information. > If you need assistance - contact Keach Sasamori at [log in to unmask] or > 847-509-9700 ext.5315 > ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################