Assuming your actually referring to foamed silicone rather than silicon (I'm not sure how you would make a foam silicon), we have used one from General Electric in the past, RTF762. There is a data sheet on their web page at www.ge.com. Hope this helps. Mary Muller ELDEC Corp. > ---------- > From: Phil Crepeau[SMTP:[log in to unmask]] > Reply To: TechNet E-Mail Forum.;Phil Crepeau > Sent: Tuesday, April 18, 2000 8:18 AM > To: [log in to unmask] > Subject: Re: [TN] Foamed Silicon > > hi, > > it seems that the rogers corporation makes silicone foams. i would also > check with dow corning. > > phil > > -----Original Message----- > From: Paul Klasek [mailto:[log in to unmask]] > Sent: Monday, April 17, 2000 11:05 PM > To: [log in to unmask] > Subject: [TN] Foamed Silicon > > > Dear Netties , > i'm seriously stuck here ; > could any of you spare me ANY lead (non Pb) to foamed flexible silicon > please : > > the target is hydrolysis > (humidity/temperature aging, of foamed polyurethanes for example) > resistant flexible foam , inject mouldable to curing dies ; > about 50 grams shot size (a handful, 6"ball) > > Technology, equipment, sheet/block fabricators, ....... > > The foamed silicon lasts for a century ; unlike pu for less than decade . > > I realize 'm stretching it here on Net with a bit distant subject ; > appreciate the help . > > Thanks a lot > > Paul Klasek > http://www.resmed.com > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for > additional > information. > If you need assistance - contact Keach Sasamori at [log in to unmask] or > 847-509-9700 ext.5315 > ############################################################## > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for > additional > information. > If you need assistance - contact Keach Sasamori at [log in to unmask] or > 847-509-9700 ext.5315 > ############################################################## > ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################