As far as I know there is not any standards for the
process, there does not need to be as any process should be well able to meet
the requirements of level 2 of IPC. I had recommended to IPC through their J
standard that references to the process and the need to consider alternative
finishes in the standard is a high priority.
If you contact SMTA in the USA they do have the
SMART Group Pin in Hole Report plus video and CD ROM on the subject. The SMART
Group is the European Surface Mount Trade Association.
Bob Willis
----- Original Message -----
Sent: Monday, March 20, 2000 6:35
AM
Subject: [TN] "Paste in hole"
standards?
Is there any IPC standards ( design. application and inspection
) in
the "paste in hole" area ( reflowing thru.hole parts)
? Please let me
know which document(s)should I check if you know
it. Thanks.
Rudolph
Yu
##############################################################
TechNet
Mail List provided as a free service by IPC using LISTSERV
1.8c
##############################################################
To
subscribe/unsubscribe, send a message to [log in to unmask] with following text
in
the body:
To subscribe: SUBSCRIBE TECHNET <your full
name>
To unsubscribe: SIGNOFF
TECHNET
##############################################################
Please
visit IPC web site (http://www.ipc.org/html/forum.htm)
for additional
information.
If you need assistance - contact Keach
Sasamori at [log in to unmask]
or
847-509-9700
ext.5315
##############################################################