Wilber - I'm not trying to be facetious or anything, but I would suggest you try using a smaller format for documentation to your production floor. B size is about the biggest you can easily handle say at a workbench, lets say for troubleshooting (A size is preferred). C size can be used with some difficulty, but D and E size are really awkward. If you want to get really large ESD bags, try Static Control Components in Sanford, NC at (800) 488-2426. They can make custom sizes in addition to standard sizes. If you have any problems, please feel free to contact me off TechNet. Ed Valentine Electronics Manufacturing Solutions 8612 Mourning Dove Road, Raleigh, NC 27615 Phone: (919) 270-5145, Fax: (919) 847-9971 Email: [log in to unmask] Website: http://www.ems-consulting.com ----- Original Message ----- From: Wilber Heath <[log in to unmask]> To: <[log in to unmask]> Sent: Tuesday, March 28, 2000 2:54 PM Subject: [TN] ESD for Schematics > We are currently trying to get all of our paperwork used on the > production floor into some type of static dissapative bags to prevent > static charges. As we use a lot of schematics that are printed as > large > as 'E' size, it has been difficult to find ESD envelopes of this size > to > put the schemartics into. We have thought of some kind of protective > lamination, but I have yet to find anything available to do this with. > Another thought I had was to use deionizing fans, but am not sure if > this would suffice. Does anyone out there have any ideas or things > that > you have used that solves this dilemma?? > > ############################################################## > TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c > ############################################################## > To subscribe/unsubscribe, send a message to [log in to unmask] with following text in > the body: > To subscribe: SUBSCRIBE TECHNET <your full name> > To unsubscribe: SIGNOFF TECHNET > ############################################################## > Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional > information. > If you need assistance - contact Keach Sasamori at [log in to unmask] or > 847-509-9700 ext.5315 > ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################