In message <2106F62FC079D211BF2A00A0C9AA8ABF0177EFC9@SRVEXCHG> [log in to unmask] writes: > Gabi, > > some time last year, I asked the same question. The result was that one of > the prominent members of this brain assembly faxed me one paper that he > wrote following extensive experiences. I take all the blame for forgetting > the name and having lost the paper (actually I forwarded it to the guy that > was taking care of this activity). > Maybe the gentleman is still on-line and hears you. > > Anyway, the bottom line of the article was that the UV curable substances > are the best. You can buy some from Dymax, along with the curing stuff. > > Of course, that will not help you much with the human problems, everybody > will think they will soon get blind. > > Hope this helps, > Ioan > > > -----Original Message----- > > From: Bogdan Gabi [SMTP:[log in to unmask]] > > Sent: Monday, February 28, 2000 11:35 AM > > To: [log in to unmask] > > Subject: [TN] Wire staking > > > > Dear TechNetters! > > Please help with safety regulations and materials for jumper wire staking. > > We encounter the following problems with our current cyanoacrylate: > > - workers complain about vapor inhalation although they work with exhaust > > units; > > - the strength of the adhesive is very low after wave soldering - we glue > > the jumpers before wave soldering , on C.S. > > - please reccommend materials used successfully and which method is the > > least harmful. > > Thank you, > > Gaby Might have been me! I did write an article about this once, would be willing to fax it. (Mental note: must put it up on the web page for the future...) Peter -- ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Peter Swanson Oxfordshire, England INTERTRONICS [log in to unmask] http://www.intertronics.co.uk Suppliers of materials and consumables to the electronics & related industries ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ##############################################################