Merix manufactures boards with Speedboard C.  I can tell you it is
significantly more expensive than just about anything else you are probably
using.  Exact material costs are dependent on volume and other factors, but
a sheet of Speedboard C is about 20x the cost of an equivalent sheet of FR4
prepreg.  There are some special process requirements for Speedboard C that
can also add to the cost.

        Mike McMaster
        RF Product Engineer
        Merix Corporation
        503-992-4263


        ----------
        From:  Alexis Meehan [SMTP:[log in to unmask]]
        Sent:  Wednesday, February 09, 2000 9:34 AM
        To:  [log in to unmask]
        Subject:  [TN] Speedboard Materials

        Has anyone out there tried the Speedboard laminates and prepreg for
        high-speed designs? I'd like to hear from folks who have tried it.
Were the
        results satisfactory? Was there an increase in cost? Thanks in
advance for
        any info you can provide.

        ********************
        Alexis Meehan
        PCB CAD Mgr.
        408-328-4595
        [log in to unmask]
        LuxN, Inc.
        570 Maude Court
        Sunnyvale, CA 94086

        ##############################################################
        TechNet Mail List provided as a free service by IPC using LISTSERV
1.8c
        ##############################################################
        To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
        the body:
        To subscribe:   SUBSCRIBE TECHNET <your full name>
        To unsubscribe:   SIGNOFF TECHNET
        ##############################################################
        Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
        information.
        If you need assistance - contact Gayatri Sardeshpande at
[log in to unmask] or
        847-509-9700 ext.5365
        ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################