TECHNET Archives

December 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Guy Ramsey <[log in to unmask]>
Reply To:
Date:
Mon, 27 Dec 1999 10:05:37 +500
Content-Type:
text/plain
Parts/Attachments:
text/plain (22 lines)
We are having problems with the interface between SIMM boards and sockets (72
Pin). The boards are supposed to be .050" +.004" to -.003". I think that is
an industry standard. Where do you measure the thickness from. The board surface
or the conductor surface. We have some that measure .045 at the glass and .047
on the edge connectors. They don't work very well, intermittent.

Anyone else have trouble like this?

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2