Susan

reason for the elctroless doing that is 1) - at times when u do a section and
look closely - there is an inclusion in the deposit - whether from the bath
or from the resin - matters not - 2 - if ur getting a spongy - amorphous
copper deposit - it's really out of balance - would look into the stabilizer
package when that is happening. but to tell uthe truth - haven't seen many
spongy deposits - unless you are referring to blisters in the hole - then
would look at the reducer.

regards

Richard Fudalewski

Florida CirTech

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################