The only time I have seen this in our inline cleaner was when the surface mount
part was not completely soldered. The water could blow under the unsoldered side
and peel the part off taking pads from the soldered leads. If it is indeed from
the conveyor I would suggest something like edge protectors that slide onto the
edge of the board and hold it up off the conveyor. Our volume is low, so we just
made baskets from 1/4" hardware cloth.

Charles Caswell
Process Lead, PCB
Frontier Electronic Systems
Stillwater OK

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################