Hi Roger and all,

I've used DeOxIt to remove tin oxide and lead oxide.  It helps alot but
hasn't removed all of it (need to call Caig about that).  Afterwards, I
rinse in technical grade isopropyl alcohol because those board areas are
conformally coated.

Hans

~~~~~~~~
Hans M. Hinners
Materials (& Process!) Engineer
Warner Robins - Air Logistics Center/Avionics Production Division
Manufacturing Branch (LYPME)
380 Second Street, Suite 104    (Building 640)
Robins AFB, GA  31098-1638
912-926-1970 (Voice) 468 - 1970 (DSN)  912-926-7164 (Fax)
[log in to unmask]


> Does anyone have any opinions on the use of contact cleaners/enhansers?
> Many of our customers are asking if they can safely use this (Deoxit is
> one
> brand).  We are starting some testing to make sure it will not attack the
> chip carrier plastic - but I thought I would ask the group.
>
> Roger Hill
> [log in to unmask] <mailto:[log in to unmask]>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################