Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 8 Dec 1999 19:56:58 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Edward
Nice to hear from you again. If the standard sectioning equipment is not
satisfactory, I have developed a wax-mounted technique. Using a wax called
Crystal Bond (it is a transparent wax with a good hardness), I mound a piece
of board with the vias on a cross-section mount. Using a high accuracy
polishing tripod, use 600 grit sand paper and inspect periodically using a
microscope. When you get close, use a higher quality sandpaper (e.g., 1,000
or whatever it is, I can't remember). It takes about 20 minutes per
sample. It is labor intensive, but it works nearly 100% when you are in
practice. I found the parts at South Bay Technology in Anaheim, CA. It is
a microscopy supply shop.
Carey
-----Original Message-----
From: edward edward szpruch <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Wednesday, December 08, 1999 7:36 AM
Subject: [TN] microsectioning equipment for microvias
>Hi technetters,
>As we are proceeding with our laser drilled blind microvias,we have more
and
>more problems with microsections.What is the recommended equipment for
>microsectioning of microvias , 75 and 100 micron diameter?
>regards
>Edward
>
>Edward Szpruch
>Eltek , Manager of Process Engineering
>P.O.Box 159 ; 49101 Petah Tikva Israel
>Tel ++972 3 9395050 , Fax ++972 3 9309581
>e-mail [log in to unmask]
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
>847-509-9700 ext.5365
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|