Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 23 Dec 1999 16:12:54 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
The foreword of the IPC-A-610 mentions required maginification levels. For fine-pitch you need to go to 30 times maginfication for "referee" inspection. Stereo microscopes with 4 to 40 times magnification work fine for most applications.
I think that the Mantis is excellent for most chip components. If you let inspectors zoom in too much, they will always find something that they don't trust.
Daan Terstegge
Unclassified mail
>>> Jean-Francois Bissonnette <[log in to unmask]> 12/23 3:33 pm >>>
Hi technet wizzes!
We're re-establishing our QC dept and I would
need to know what to look for in the solder
inspection departement. What kind of microscope
should I look for? According to the table in
IPC-A-610, I would need 10X mag. equipement, Is that
enough? Most of our board are surface mount, be we
do have some through hole board done.
We have a 6X from Vision Engineering (Mantis) and
it is not sufficient (from my point of view) to inspect
certain soldered smd chip.
Any suggestions???
JF
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|