Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 8 Dec 1999 13:28:07 -0800 |
Content-Type: |
text/plain; charset=us-ascii |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
From
http://www.askmar.com/askmar/Noise/Noise%20FAQ/FAQ_Text.html
BEGIN OF QUOTED MATERIAL ...
------------------------------------------------------------
6.5 Why does blowing over a bottle make a note?
Resonance in acoustics occurs when some mass-spring combination
is supplied with energy. Many musical instruments rely on air
resonance to improve their sonority. If you blow across the
mouth of a bottle you can often get a note. The bottle behaves
as a Helmholtz resonator. The main volume of air inside the
bottle is analogous to a spring, whilst the "plug" of air in
the neck acts as an attached mass. The resonant frequency is
roughly given by:
f = { c sqrt (S/LV) } / 2pi
c is velocity of sound
S is the surface area of the neck opening
V is bottle volume
L is the effective length of the neck i.e. the actual length
plus ends correction. Ends correction ~ 1.5 times radius of
neck opening
Example: A 75 cl (7.5E-4 m^3, approx. a "fifth") sized wine
bottle with neck diameter 19 mm, bottle neck length 8 cm,
air temp = 20 degrees C. The calculated resonant frequency
is 109Hz, actual resonance was 105Hz.
Helmholtz resonators are sometimes employed as a means of
passive noise control in air conditioning ducts. They may
also be hidden in the wall design of auditoria and offices
in order to improve the acoustics.
------------------------------------------------------------
END OF QUOTED MATERIAL ...
Matthew Lamkin wrote:
>
> Hi there guys, can anyone tell me where I can find the equations
> (preferably the shorter version) for working out a Helmholtz resonator?
> (on the w.w.web that is).
>
> We can seem to find it in any physics books that we have.
> Tia - Matt.
|
|
|